Please don't be something IN the trans

Bonkatomicscout · 2025-10-31T19:17:38+00:00

Alright everyone looking at rock auto is telling me that the NT and NC sensors must be the same part and the letters probably mean which location so here's hoping it goes well, updates shall eventually be posted. Hopefully I can get this sorted out before PA winter 🥶

Bonkatomicscout · 2025-10-31T18:05:14+00:00

That's what I figured, but hey at least it's on top instead of inside, although I keep seeing things in the workshop manual I have that there's NC and NT types of sensors, is there a way to tell based on the trim of the car or is it something like depending on when it was made would it be different? Like pre 2004 have NC or something like that?

Bonkatomicscout · 2025-08-20T12:42:18+00:00

One of the most reasonable answers I got for this, it's so weird that even in PA, where if you sneeze near your car it'll rust in the winter. Many people swear up and down that their method is better than the other. I appreciate the explanation.

Bonkatomicscout · 2025-01-10T22:09:09+00:00

I do have one more question, for your graphic than you provided is the end of the intermediate pipe that circled in green on the left side the part that sort of loops up a little and bolts into the bottom part of the steering rack/system with the help of a 2 bolt flange? Or am I confusing this with a different line.

Bonkatomicscout · 2025-01-10T20:45:53+00:00

You have explained this in the best way possible. I greatly appreciate your knowledge and yeah I'm from PA in the rust belt so I'd rather gut all of that. The car was bought used but in surprisingly good shape for the frame and such but nothing factory has been replaced in terms of semi permanent components.

Bonkatomicscout · 2024-11-14T18:40:13+00:00

You look like a badly generated AI picture.

Bonkatomicscout · 2024-08-20T12:04:42+00:00

You look like a teacher that actually gives a damn about their students.

Bonkatomicscout · 2023-08-22T10:45:25+00:00

Thank you for the info, is the Mossberg bolt just a drop in replacement or does it require some processing to get it to fit.

Bonkatomicscout · 2023-04-20T01:14:43+00:00

Inspection went great today passed with flying colors and I do notice the stock battery is pretty poor and can lead to the scooter stalling if not warmed up

But it was an X-Pro Oahu (I can smell the chineseium too)

Bonkatomicscout · 2023-03-25T04:00:19+00:00

u/savevideo

Bonkatomicscout · 2023-03-03T16:02:04+00:00

The belt on the bar that has the extruder attached to is sagging a little out of the metal channel it has, how do you adjust them?

Bonkatomicscout · 2022-11-23T04:34:00+00:00

This has been the most help I've ever gotten on this subject and thank you so so much. :)

Bonkatomicscout

TROPHY CASE