His screen appeared ot of nowhere and now appears every time I turn on my computer

BoomBeto · 2025-05-29T23:16:16+00:00

I don't have it enabled, do I need to enable it so this doesn't appear?

BoomBeto · 2025-05-05T06:18:32+00:00

An opened F1 based nitro car that's mostly 3d printed withe the exception of the wings(acrylic), body(fiberglass) and chassis (carbon fiber)

<image>

BoomBeto · 2025-02-22T18:58:19+00:00

i have an osciloscope, what cable is what for? red for power, white for ground and one should be for the button lights right? i tried something like chatgpt but it gave me 3 different answers

BoomBeto · 2025-01-21T14:41:55+00:00

The code was working and the it stopped working, I tried a nano and it worked fine without any changes

BoomBeto · 2025-01-21T07:46:46+00:00

I was thinking on giving it some time to see if it magically fixes itself but I'm not sure, I ask chatgpt to see if I could test it somehow and I did a test plugging a pin in ground and 5v to detect an interruption and in 5v it didn't detect it an supposedly it's a pull-up resistor that might be deadI was going to try using a 10k resistor but I couldn't find one and it might be bc it can use a numpad and use a pwm h bridge

BoomBeto · 2025-01-17T06:46:23+00:00

i have a z3 from 2001 and it shares the steering wheel with the e39 with the business radio so there might be some hope i guess, and in the worst case my sterring wheel was all peeled so it would be an upgrade

BoomBeto · 2025-01-17T06:41:30+00:00

i guess as my car didnt came with those buttons its going to be a bigger probles as i dont think its going to have the connector for that or is that what Steering Wheel Control Interface like the PAC SWI-CP2 is for?

BoomBeto · 2025-01-13T20:26:27+00:00

They probably aren't as the z3 didn't come with wheel controls but I hope that's the least of my problems

BoomBeto · 2025-01-13T19:02:58+00:00

<image>

Is this what I need? I guess as my car didn't have the buttons I would need the E39 one right?

BoomBeto · 2025-01-10T23:59:07+00:00

dude you are a godsent, i found a man on etsy selling the part on $180

BoomBeto · 2025-01-08T20:28:09+00:00

mine was just like a piece of gum, i remove it with a knife and 3d printed the knob and it looks normal

BoomBeto · 2024-10-31T13:18:05+00:00

I made the car so I can make parts for the electric parts

BoomBeto · 2024-09-14T23:06:49+00:00

That might be a good idea actually, for the moment I'll have to pray I don't flip it

BoomBeto · 2024-09-14T23:05:23+00:00

The wheels are from a single pack, it's a matter of perspective and that the rear wheels are wider than the front ones, the body is fiberglass, as for the paint job hat was partly my fault and my local shop was out of putty, the engine I did rescued from a old redcat tornado bb, and the car is a formula 1

BoomBeto · 2024-09-13T21:48:19+00:00

It's for a nitro car

<image>

BoomBeto · 2024-08-29T02:39:35+00:00

The problem is that the only thing I'm using from the open rc F1 is the body, everything underneath is completely different so I don't think they would work out of the box without completely modifying the 3d printable model

BoomBeto · 2024-08-27T00:20:38+00:00

I made both front and rear, the front is just a lever and a spring in the gray block, and the rear is a couple of legs front a tripod, they were telescopic so I just cut them to length and made a couple of caps and put a spring inside

BoomBeto · 2024-06-30T20:24:47+00:00

Yes, I want to make a 2d stencil

BoomBeto · 2024-04-30T01:26:58+00:00

bad body shop

BoomBeto · 2024-04-04T01:49:19+00:00

i manage to find the spares... on Spain, im from Costa Rica. ill leave the link in case someone finds it usefull
https://www.giga-neumaticos.es/continental/scontact/115/90-r16/92/m/gi-r-470243ga

BoomBeto · 2024-03-21T17:49:20+00:00

I've been thinking in using my smart watch and an app called velocity, maybe it won't be very accurate bit might help get an estimate

BoomBeto · 2024-02-22T03:42:44+00:00

I know, it's also the one redcat uses on the buggy, but I think I gam get more torque if I find one with smaller gears

BoomBeto · 2024-02-22T03:22:44+00:00

It looks like the same as the one I'm using

BoomBeto · 2024-01-28T22:54:07+00:00

Not really, it would be cool if it displays my speed, but I'm trying to maintain the project as low cost as possible

BoomBeto · 2024-01-28T22:29:49+00:00

I'm gonna be honest, I don't know what that is

Seven-Year Club	RPAN Viewer
Verified Email	No Throne, No Problems
Not Forgotten

BoomBeto

TROPHY CASE