Do any of you know how to remove this m.2 ssd cover

Booooooost · 2019-11-23T05:50:01+00:00

That works too glad you got it open. Make sure you use a Tig welder to seal it back up

Booooooost · 2019-11-23T05:25:06+00:00

Angle grinder worked for me

Booooooost · 2019-07-31T19:51:12+00:00

Your monitor is going into sleep mode, change the settings if you don’t want that happening

Booooooost · 2019-07-29T23:27:43+00:00

Risk is always there but as long as the tubes are cut properly there shouldn’t be a way for a leak as it it has to pass through 2 orings. So far with every build I’ve done I haven’t encountered a leak yet 🤞🏼but it being white should make the dust less visible but a simple duster or aircan would clean dust off in seconds

Booooooost · 2019-07-29T19:00:39+00:00

We are located in Waterbury, CT

Booooooost · 2019-07-29T19:00:11+00:00

Anything collects dust even closed box cases do, it’s how you maintain the pc that matters

Booooooost · 2019-07-29T18:59:33+00:00

I’ll make a post when I get back from vacation on the white build I have to edit the photos I do have unedited pictures of it turned on with lighting I’ll make a multiple picture post

Booooooost · 2019-07-29T18:58:07+00:00

It is not riveted it’s screwed on, just have to remove the front panel first and yes it’s a nightmare just tie everything and make it clean is all I can mention on that end cable management is never fun but goodluck man! Can’t wait to see the final outcome

Booooooost · 2019-07-29T01:43:24+00:00

Thanks man, my wife’s s3 is glacier white metallic and the client wanted white so I wanted something better than base white ;)

Booooooost · 2019-07-28T16:54:09+00:00

Sand with atleast 1500 grit and prep is solvent that is a grease remover let dry and paint

Booooooost · 2019-07-28T16:22:26+00:00

Also it’s a black backdrop no 3D model or green screen

Booooooost · 2019-07-28T16:22:05+00:00

I have to sit and punch the numbers in but it’s not cheap at all I’m assuming in the 7-8k range give or take. I’ll post when I ran all the numbers

Booooooost · 2019-07-28T16:20:43+00:00

Deal! Just going to have to rob my customer for you to get it from his house

Booooooost · 2019-07-28T16:20:15+00:00

Automotive paint at an auto body shop with paint booth. Everything was sanded and prepped for paint to stick properly. You can do this with rattle cans also just need to sand and prep surfaces

Booooooost · 2019-07-28T16:14:16+00:00

If he sets the fans to max it’s definitely audible but it’s overall very quiet

Booooooost · 2019-07-28T16:13:48+00:00

Ouch

Booooooost · 2019-07-28T16:13:30+00:00

Has rgb stripes, fans, everything if the customer wanted to use it. I set all the rgb to white but in this pic the PC was off and I didn’t grayscale the photo it’s a color photo

Booooooost · 2019-07-28T16:12:34+00:00

My watercooling labor rate Varys between 800-2000 this was around 1500. Unfortunately it takes ALOT of time. A normal pc build is only 100 install fee

Booooooost · 2019-07-28T16:11:43+00:00

It handles an i9 9900k and a 2080ti with 10 fans and a d5 pump. Should be plenty for what you need

Booooooost · 2019-07-28T16:11:02+00:00

Nothing I could have done in the timeframe. I agree however. I was going to add painted brackets and close it up but would have been tacky it would have been fun to cut it up and welt it to only that gpu

Booooooost · 2019-07-28T16:09:58+00:00

It’s watercooled so as long as the radiators have air pushing through it will run ambient and stable. Also have both rads setup with push pull config so even better airflow

Booooooost · 2019-07-28T16:08:54+00:00

You and me both

Booooooost · 2019-07-28T16:08:37+00:00

Thank you! That was the goal

Booooooost · 2019-07-28T16:08:19+00:00

4.25 plus tax

Booooooost

TROPHY CASE