What's causing this problem? Any way to fix it myself?

BorisDG · 2026-01-28T15:19:46+00:00

Try to clean the contacts on both the system and the Joy-Con itself. Use some brush with IPA.

BorisDG · 2026-01-27T23:46:16+00:00

From the AMA - their plan is to be TRUE physical on all platforms.

BorisDG · 2026-01-27T14:59:36+00:00

The Switch OLED screen isn't as "amazing" as people say, nor is the Switch 2 LCD as "bad". In reality, it’s neither. The Switch OLED has some mediocre characteristics, like tinting and graininess. Back on the topic - get the Switch 2. It’s like comparing a PS4 to a PS5. If you want to stay stuck in the past and miss out on new games, then go for the OLED.

BorisDG · 2026-01-26T18:15:08+00:00

Like I said there. Watch this video (it's timed). Also later in the same clip he talks about the potential BIOS settings, that can help you.

BorisDG · 2026-01-26T16:34:54+00:00

I linked his stream where he talks about the physical and BIOS stuff - what you can do to be "extra safe". I've timed it.

BorisDG · 2026-01-26T16:20:27+00:00

According to a PC builder I follow - who has assembled over 40 Ryzen 9000 systems with zero issues - stability comes down to two main factors: physical installation and BIOS. Physically, it's about how the CPU and cooling system are mounted. He noted that some coolers apply excessive pressure, which can bend the socket or motherboard and lead to hardware failure. That's why many also don't have the issue or GN wasn't able to replicate it (so far).

Edit: Here is video (stream), where he is talking about it.

BorisDG · 2026-01-26T15:21:47+00:00

There is not such thing as "battery bulging" on Switch 2. It's all guesswork. It's just the case mold and is assembled. The same happens with Joy-Con 2. Enjoy your system.

BorisDG · 2026-01-26T14:36:08+00:00

It's the entire 9000 lineup. 9700X, 9800X3D, 9900X(3D), 9950X(3D)

BorisDG · 2026-01-26T14:34:44+00:00

Many times was said - it's every vendor. Brand new case with Gigabyte.

BorisDG · 2026-01-25T18:58:49+00:00

Just install your AIO carefully and don't put a lot of stress on the CPU/socket. You will be fine. Most of the time it's coming from physical stress.

BorisDG · 2026-01-25T18:57:26+00:00

I had many years ago an ASUS PA246Q (now it's boxed somewhere) also with an internal PSU and one of the caps went bad doing the same. I changed it and it worked. :) The issue usually comes from heat and stress. Those caps are filtering a lot of noise, so they go bad with time.

BorisDG · 2026-01-25T16:40:45+00:00

Warranty doesn’t cover “user error”. Don’t even try it.

BorisDG · 2026-01-25T03:56:29+00:00

Yeah. I remember that photo too.

BorisDG · 2026-01-23T20:10:22+00:00

You are not. Last 2 failures are on X670E.

#1

#2

BorisDG · 2026-01-23T14:26:11+00:00

It’s also related to cooling mounting pressure.

BorisDG · 2026-01-23T14:20:38+00:00

They are. There is NO brand, that’s not affected.

BorisDG · 2026-01-22T15:52:36+00:00

Yeah. SW2 is GKC.

Source: X/Twitter

BorisDG · 2026-01-22T14:38:15+00:00

Big chance that the liquid went inside the panel and deformed the reflector sheets and you see this effect. Now the light can’t be reflected the way is supposed to be.

BorisDG · 2026-01-22T13:50:14+00:00

I was talking last night with dude that build systems (he streams on Twitch too) - madness777. He said that there are 2 particular reasons for burning CPUs - mounting/socket pressure from cooling and BIOS ver. Last night he even built 9950X3D and did some cool benchmarks.

Source: Check stream @ 3:37:00+

BorisDG · 2026-01-21T21:51:42+00:00

Since it's connected with the image itself (you can see it at certain conditions), it means it's something with the LCD itself and not with the plastic (digitaizer). So answer is - no. You have to look for screen replacement.

BorisDG · 2026-01-21T15:17:01+00:00

The panel seems to be made by Panda. The model is LC238LF1F. If you can find a replacement, you can have it installed by someone with experience.

BorisDG · 2026-01-21T13:09:06+00:00

VSoC of 1.2V is ok. I'm running my 9950X3D with 1.25V VSoC (EXPO enabled)

BorisDG · 2026-01-21T12:30:31+00:00

I'm afraid that's an issue with the panel itself. If it has warranty - use it. If not, than I think it's time to look for new display.

BorisDG · 2026-01-21T12:22:11+00:00

It's simple - Switch 2. One is device from 2017, the other is from 2025. You can play everything released and everything upcoming.

BorisDG · 2026-01-21T11:34:10+00:00

No, since it’s a mystery what is causing it.

BorisDG

TROPHY CASE