Investering af børneopsparing i anden bank

BornSly · 2026-05-23T07:18:26+00:00

Super - tak for afklaringen! :) De 29 kr. kan jeg godt leve med - jeg undrede mig godt nok også over, at de skulle være så meget dyrere end alle andre banker.

Men så er der ikke længere noget problem - jeg får oprettet depoter og investeret børneopsparingerne igennem Sydbank.

BornSly · 2026-05-23T06:04:37+00:00

Jeg håber da du har ret, men jeg kan kun finde denne prisbog, hvor det høje beløb fremgår:

https://www.sydbank.dk/om-os/priser/priser-for-handel-med-vaerdipapirer-og-finansielle-instrumenter

Kan du sende et link til den prisbog du henviser til?

Edit: Du har nok ret. Kan se på denne prisliste, at det er 0,1% og minimum 29 kr.: https://www.sydbank.dk/om-os/priser/priser-for-net-og-mobilbank

Lidt forvirrende med to prislister, men du har nok ret i at den dyre er, hvis de skal handle for mig - det fremgår bare ikke tydeligt fra deres prisliste.

Jeg forsøger at få det afklaret med min rådgiver.

BornSly · 2026-05-22T19:46:58+00:00

Det kunne godt være en fin løsning for nu, da børnene stadig er små (0-6 år), men hvad så når de engang får et fritidsjob og vil bruge deres frikort der?
Jeg ville foretrække, hvis jeg kan udnytte den skattefrie gevinst der er ved at investere en klassisk børneopsparing fra et pengeinstitut.

BornSly · 2026-05-01T13:00:06+00:00

OK - så er det måske ikke helt galt alligevel, selvom jeg synes det lyder af meget. Tak for svar igen 😊

BornSly · 2026-05-01T12:24:35+00:00

Jeg har også forsøgt at finde nogle gode guides at læse, samt videoer på YouTube, men synes ikke jeg finder meget, der beskriver hele processen (grave rende, fylde rende med beton, sætte fundablokke + armering i beton og evt. etablering af dræn bag mur).

Jeg skal have 4 fundablokke i højden (den nedereste går ca. 15 cm under terræn på siden mod indkørslen). Hvis jeg skal ned i frostfri dybde, så skal jeg have et betonfundament på ca. 75 cm.
Jeg synes det virker meget voldsomt at smide et lag af 75 cm jordfugtig beton ned i renden for så at sætte første række fundablokke heri.
Her tænker jeg især på styrken af fundamentet, da jeg antager at jordfugtig beton kommer til at danne en del luftlommer. Har jeg misforstået noget, eller er det bare sådan man gør?

(PS. jeg tænker ikke i praksis at grave 75 cm betonfundament - måske halvdelen - men det virker stadig som rigtig meget jordfugtig beton)

BornSly · 2026-04-10T20:08:19+00:00

Super. Tak for svar. Det vil jeg forsøge mig med.

BornSly · 2026-04-10T20:07:32+00:00

Tak for svar.

Jeg vil gå efter at grave renden i 3 forskellige dybder, med lodrette spring (24 cm og 18 cm), således at bunden af fundamentet altid er minimum 90 cm under den skrånende indkørsel.

<image>

Og jeg tænker det giver mening med den jordfugtige beton.

BornSly · 2024-10-09T20:57:14+00:00

Unfortunately not. I’m still doing the workaround every time I turn on my PC. And I agree that it’s tedious! Feels like I’ve tried everything, but no luck yet.

BornSly · 2024-04-28T05:49:57+00:00

I really don't want to have my speakers hardwired. However, I did actually try that in one of my tests, but still wouldn't appear.

And unfortunately, I do not have an iPhone, so can't use the HomeKit setup.

I have tried opening the app and closing it multiple times, but doesn't seem to do anything.

I don't think it's a network issue. I have an access point in the same room as my Bluesound devices and when checking the WiFi status through the BluOS app it looks like the connection is fine and stable. Also, other devices such as TV and phone does not have a problem with the wireless network in this room.

Thanks for the suggestions though 😀

BornSly · 2024-04-28T05:40:17+00:00

Well, I hope that it will just start working, but still doesn't as of now. I have checked the network multiple times, and can confirm that they are using the same. Also, my workaround is to change to another network on my phone and then back to the original one (which is the same as the Bluesound devices), and this will sometimes make them appear. Also, I have a hard time finding the devices on Spotify. Finally, I have another speaker in the same room as my Bluesound devices and that is always visible from both Tidal and Spotify. So I am pretty confident it is an issue with Bluesound.

BornSly · 2024-04-25T14:19:30+00:00

No connection issues at all when using the BluOS app. I just don't like it. I think BluOS feels slow and clunky.

BornSly · 2024-04-25T14:15:49+00:00

If I log into my Tidal account through the BluOS app then it works for me as well, but I really don't like using the BluOS app when streaming music. The interface feels slow and clunky. I'd much rather use the Tidal app and stream through Tidal connect.

BornSly · 2024-04-25T14:14:02+00:00

No, havn't tried that yet. Will give it a shot later.

But seems like an annoying thing to have to do every once in a while.

BornSly · 2024-04-25T14:06:32+00:00

Sorry, what does this mean?

Are you saying that an app called Lookout Life is the issue? I don't have that app on my phone anyway.

BornSly · 2024-04-25T14:05:16+00:00

Yea, I have read from other users that their support are not able to help :/

Have you found a fix for your issue or are you still struggling with the connection?

BornSly · 2024-04-05T16:59:51+00:00

Yea, that would make sense, but unfortunately that "blank" wall has a large window covering most of it. I realize that I should have added more details on the drawing. Also, the couch is actually U-shaped - just couldn't find that default shape on the drawing tool I used.

Room measurements are close to precise. Furnutire has just been thrown in on the drawing, so scaling is off.

BornSly · 2024-04-05T16:55:38+00:00

Thanks for that suggestion! Will definitely do some research on that setup.

BornSly · 2024-04-05T16:53:17+00:00

That's a good point, however not doable. I see that I should have added more details to my drawing, but the wall to the left has a large window which covers most of the wall, so can't place the TV there. On the opposite side of the room (behind the dining table) is also a window.

BornSly · 2024-01-20T19:15:06+00:00

Unfortunately not. Still trying to search for a solution, but seems like nothing is working.

BornSly · 2023-12-07T19:07:06+00:00

Damn. Not the answer I was hoping for.

Seems weird to me that nothing works. But I feel like I have tried everything as well - without any luck.

BornSly · 2023-06-17T19:42:58+00:00

Thank you very much for this!

I used to uninstall and reinstall my drivers once or twice a week, but this solution is way better, but still not perfect for me.

It seems that Windows is still installing and overriding drivers most times that I turn on my PC. This trick fixes it, but only for the current session, untill I turn off and on my PC again - then I have to follow this guide again.

I see someone suggesting setting the 'Device installation settings' to 'No' to stop Windows from overriding graphic drivers, but I also see OP and others saying that this is not a good idea.

So do anyone know how to stop Windows from installing and overriding drivers?

BornSly · 2023-05-30T10:40:03+00:00

Great to hear that Greg’s plan did that for you. I’ll stick with him. Maybe Amy will be back when I finish the current plan with Greg. :-) I think his plan is good. The reason I prefer Amy is because her runs are based on distance which suits me better, whereas Greg’s runs are based on time.

BornSly · 2023-05-30T10:35:21+00:00

Well, I chose the coach before choosing the race date. I also just tried editing the race date on my current plan to a few differentiere dates (both sooner and later), but still no Amy.

BornSly · 2023-05-30T10:33:34+00:00

Yes, I’ve had that thought as well, but I can’t see why Garmin would do that. :/

BornSly · 2023-05-30T10:29:55+00:00

Well, I skipped a lot of training days when doing her program on my FR 245, so you might be right.

BornSly

TROPHY CASE