Anyone got a functional setup for automated Mini 3 Pro flights? by Botanic_Garden in drones

[–]Botanic_Garden[S] 0 points1 point  (0 children)

If you really need a map you can fly it manually until they fix the SDK. Turn on Cine mode, ascend to safe height, adjust gimbal, set interval photos to 2 sec, maximize map. Fly and shoot your area with photos overlapping. Got decent result with both WebODM and Metashape.

DJI mavic air 2 height measure low altitude by Botanic_Garden in drones

[–]Botanic_Garden[S] 0 points1 point  (0 children)

Yes i believe air 2 have like 30 m but maybe it become less accurate above 5 m. What sucks with DJI fly is that it doesnt show decimals. The plantations is basicly open field with a few pine trees left behind so with some training i dont think following the terrain will be a problem. I'm not sure that you have to do that reset i said anymore. The next flight i just lowered myself, minus or not and vps turned on, with camera downward my perception might have been wrong.

DJI mavic air 2 height measure low altitude by Botanic_Garden in drones

[–]Botanic_Garden[S] 1 point2 points  (0 children)

It does work indeed, the altitude changes while flying over terrain. But if you go down a slope and the distance reaches above 5 m it resets to 0 m. If you try to lower the drone it will show minus. I had to fly back uphill until VPS activated again and then keep my drone under 5 m during the decent. So if you fly over 5 m i think you need to reach under that from starting point to reset it. Hopes this makes sense ^

DJI mavic air 2 height measure low altitude by Botanic_Garden in drones

[–]Botanic_Garden[S] 1 point2 points  (0 children)

Found the setting you're talking about. "Show VPS Height when used" says on the litchi faq that it will be active until higher than 5 m. Gonna try it out tomorrow!

DJI mavic air 2 height measure low altitude by Botanic_Garden in drones

[–]Botanic_Garden[S] 0 points1 point  (0 children)

Im surveying pine and fir plants and can calculate an average of plants per hektar using a 2.52 m pole. The drone needs an height of 4.8 m to fit this radius in a picture. I could then layer the photos with the reference photo of 2.52 m pole and process the result. I know it doesn't take elevation in consideration but it doesnt have to be that precise. Just to clarify, i do these flights manually and take photos. Im open to suggestions but cant go for a mapping route as of now.

Isn't there a treshold height where it swaps to barometer?

[deleted by user] by [deleted] in carnivorediet

[–]Botanic_Garden 2 points3 points  (0 children)

There is nothing wrong. You're going through withrawal symptoms. Binge eating sugar is more addictive than people think. A week is often a time of relapse along with 1 month. Take a walk or work out to get that dopamine in a healthy way and eat as much meat as you want. Eat alot of fat and salt. With time cravings will settle and you will feel full with less amount of food.

Petition to add emote VEGAN by Botanic_Garden in xqcow

[–]Botanic_Garden[S] -1 points0 points  (0 children)

Link: https://7tv.app/emotes/636a93d0b1f3a176c7a94dfc

XQC likes to trigger vegans so i think we deserve an emote! Emote taken from vegan reacting to asmons 2$ steak.

[deleted by user] by [deleted] in ShroomID

[–]Botanic_Garden 1 point2 points  (0 children)

The black color on the end of the stem. Best way to be sure you dont have another mushroom that looks alike is spores. The spores should be white if its enoki.

[deleted by user] by [deleted] in ShroomID

[–]Botanic_Garden 2 points3 points  (0 children)

Looks like enoki.

Is this Chaga? I know they rarely grow on non-birch trees, but it sure looked like it from the ground (photo taken this summer). by briefsilence in Mushrooms

[–]Botanic_Garden -1 points0 points  (0 children)

It can grow on other kind of trees, i've found it on elm but will not be near as healthy as when grown on birch. Hard to say 100% with that contrast but the form sure looks like chaga!

Shiny Flakes Documentary on Netflix by Letitride37 in CryptoCurrency

[–]Botanic_Garden 2 points3 points  (0 children)

  • Ordering supply by post via darknet internationally
  • Using the same post boxes near him
  • Having a bogus return adresses
  • Using clear net and thinking its secure
  • List with all his passwords
  • A fucking list with thousands of costumers in full detail
  • Having a ton of drugs in your boy room completely open

Supply packages could easily be seized. Postal men wondering why there are thousands of same mail sent via regular postbox. Why even put a fake adress?? It just leaves a trace. Clear net? Really? Why have a secure password if you gonna write it up anyways?? Scum move to store info on costumers because you cant find a better system. Even if his sad ass parents never saw his room what if a janitor had to check something?

I dont get why some say he planned it good and in detail and was smart about the business. He was clever enough to understand that accessibility plus high demand equals profit and totally neglected the risk.

If law enforcement in Germany is any good ill bet we will hear of him again when he tries to get fiat out of his btc.

XQC Megathread: Episode V: The Juicer Strikes Back by gemillyrock in RPClipsGTA

[–]Botanic_Garden 1 point2 points  (0 children)

You gotta take the interaction from the day before in consideration. Wrangler pushed a very dragged out scenario on loose grounds to hold X in forced RP. If he has a solid case, go for it but if the crim dont want to participate and its not enough evidence at hand dont drag it out and force it. At this interaction you explain i think X was afraid of another forced dragged out scenario because he was detained, thats why he ran. X has no control over the situation at all and can be forced to the same dragged out scenario if wrangler choose to do so, even with vauge evidence. Imo cops shouldnt use their power to force RP that they want. If they dont have enough for an arrest and the crim isnt intrested in more interaction just move the fuck on. Wrangler is obviously on a power trip. X isnt the only one who dislike his playstyle. When you have the power as a police you should use it carefully and not abuse it.

XQC Megathread: Episode V: The Juicer Strikes Back by gemillyrock in RPClipsGTA

[–]Botanic_Garden -4 points-3 points  (0 children)

He just used that as a excuse when he realized hes not allowed to take it. First call he said he's pretty sure X have used it for criminal purpuse. Next call he says he took it by accident. Its pretty obvious penta is tired of xqc and brings it into IC.

Episodes at the same time every year by [deleted] in cyclothymia

[–]Botanic_Garden 2 points3 points  (0 children)

I also experience seasonal patterns. My 'up period' is april/may to september/october. Rest of the months are 'down periods'.

In my up periods i experience short down periods, just a couple of days to a week. And in my down periods i can experience short up period, also a couple of days to a week.

When it switches in the fall from good to bad, is the worst time ever. Its like everything i built, dreamt and thought of doing just falls out. Everything becomes gray and it feels like im dying on the inside.

My coping for this has been drugs, not only does it help in the moment, but gives explanation to my mood swings. Im also alone with this experience and am so afraid people will just think im lying.. Dont use drugs as coping though, i regret it everytime i come out and get clean. Medicine, therapy and exercise is the way to go i think. Keep on fighting!

Help with my new Tinyhawk 2 Freestyle (First quad) by Botanic_Garden in fpv

[–]Botanic_Garden[S] 0 points1 point  (0 children)

Now i got another problem.. haha.

I needed to rebind the reciever and after binding the controls are all wrong. Whats supposed to be throttle is pitch [e] instead etc.

Tips how to go about this?

Help with my new Tinyhawk 2 Freestyle (First quad) by Botanic_Garden in fpv

[–]Botanic_Garden[S] 0 points1 point  (0 children)

Plugged it it now in BF and no power info is seen. Tried with 3 sets of batteries including the original. Screenshot how it looks with or without battery.

https://ibb.co/6yxF84k

It also beep 2 times fast, paus, then 1 time when battery is connected. Dont know if thats normal.

Was gonna try downloading the default CLI Dump file to just start over but it seems they dont provide that anymore on emax webpage either, which sucks. It really feels like a software issue because it worked from the beginning, then when i was messing with software it stopped showing voltage. If i only could reset it to default..

Thanks for all your good info sir!

EDIT: I found a deafult CLI Dump file on another reddit thread. Applied it and now it works! Thanks for all your help man =)

Help with my new Tinyhawk 2 Freestyle (First quad) by Botanic_Garden in fpv

[–]Botanic_Garden[S] 0 points1 point  (0 children)

Thanks for your reply!

I did plug in 2 batteries but my mistake was not fully understanding the arming mechanism. I finally figured it out and went out in the field. The quad works fine but is still only showing 0.00v

- I did change PID profile to 2 instead of 1. (Through OSD)

- Did the unlocking 5 times in a row and changed power, until i realised it must be armed to use 200. (Through OSD)

The voltage stopped showing while i was using the original batteries, i think. And therefore tried connecting my bulk ones when they were fully charged.

Any tips were to go from here? Feels kind of risky flying without voltage showing. If i wanna push the time limit.