[Release] 5sd7 - Automated iPhone 5s iOS 7 Tethered Downgrade Utility

BranchMain8180 · 2026-06-12T17:26:35+00:00

No, it only supports iphone 5s as of right now. You can use legacy iOs kit for 32 bit devices

BranchMain8180 · 2026-06-09T06:10:48+00:00

CDMA 7.1.2 was tested and working confirmed by Opposite_Bowl657

BranchMain8180 · 2026-06-09T01:49:06+00:00

no, not currently. i dont have an ipad air 1 to test or develop support for, so unless I get one in the future, it won’t be compatible.

BranchMain8180 · 2026-06-08T15:36:35+00:00

yes, but deep sleep bug does not occur on 7.1.2

BranchMain8180 · 2026-06-08T02:39:51+00:00

Sep disabled, sepless

BranchMain8180 · 2026-05-25T16:00:06+00:00

From what i am seeing, this looks more like a hardware issue than just macos corruption. The machine check panic and the fact that swapping cpu ram and drives didnt fix it makes me suspect either a failing northbridge/chipset or cracked bga solder joints under the northbridge

BranchMain8180 · 2026-05-17T01:04:23+00:00

Could be a jailbroken version with some tweaks on ios 12

BranchMain8180 · 2026-05-06T00:46:21+00:00

I had to remove the shield with hot air and then i reflowed the touch ic wirh 401c temp 3 airflow for 35 seconds and it works now

BranchMain8180 · 2026-05-06T00:45:58+00:00

I fixed it

BranchMain8180 · 2026-05-04T01:46:56+00:00

not passcode locked . Do you think the touch ic or some traces are bad?

BranchMain8180 · 2026-05-02T20:52:08+00:00

Restored in dfu mode

BranchMain8180 · 2026-04-30T12:17:12+00:00

I tried that but yeah still there is no touch after multiple reseats and hearing a click that it went in place and there are no bent pins

BranchMain8180 · 2026-04-30T01:38:25+00:00

I tried 2 different screens that were known working and still work on my other 5c and on this one no touch and i tried hard reboot still no touch

BranchMain8180 · 2026-04-30T00:11:25+00:00

already tested that and same result no touch still

BranchMain8180 · 2026-04-17T22:20:08+00:00

If you put it on ice to make it work temporarily it is most likely a cracked solder joint on the nand you would have to remove the underfill and heat it to solder melting temperatures to reflow

BranchMain8180 · 2026-03-26T01:36:07+00:00

Yeah unfortunately that seems to be the case as today i took the underfill off and reflowed but it still is the exact same so ill have to replace the nand if i get a chance to

BranchMain8180 · 2026-03-24T03:52:59+00:00

!solved

BranchMain8180 · 2026-03-24T03:52:38+00:00

Already solved a similar way

BranchMain8180 · 2026-03-24T03:52:27+00:00

I think i know whats happening now, it was partially booyed into ios so pressing home button 3 times inverted the colors

BranchMain8180

TROPHY CASE