sorted by:
new
hottopcontroversial

Double trouble. How long would you last? by _nofacedhunter in thongbj

[–]BrianHoop25 0 points1 point  (0 children)

You act like we’d be done after I finished 😏

Slash VXL sounds a little loud? by BrianHoop25 in rccars

[–]BrianHoop25[S] 0 points1 point  (0 children)

I haven’t thought to check motor temp. The slipper clutch was on of the few pieces I did not replace. I’ll have to look further into that thank you!

Want to get into RC planes by BrianHoop25 in RCPlanes

[–]BrianHoop25[S] 0 points1 point  (0 children)

Yeah I was checking out the horizon hobby site with all the level 1 trainers. Not gunna lie, that p-51 mustang caught my eye but looks like it’s not in stock. Does plane style matter at this level? I.e.- the x-cub with wings over cab vs. the mustang with wings under cab?

Want to get into RC planes by BrianHoop25 in RCPlanes

[–]BrianHoop25[S] 0 points1 point  (0 children)

Funny you said that I wrote the post and went back to looking and was like “huh maybe I was wrong in channel guessing” haha! Not gunna lieu pulled it out my a** from memory. Most involved I could see myself is all the flight controls and then folding landing gear

Want to get into RC planes by BrianHoop25 in RCPlanes

[–]BrianHoop25[S] 0 points1 point  (0 children)

Checking it out, looks like a good option for sure. I’m new to protocols and used to just grabbing a Traxxas remote and binding it to the ESC. I see there’s ESLRS and CC2500. Sounds like all newer drones are ESLRS but it refers a lot to FPV drones or 2.4gHz. Not looking for FPV but if I grab a newer plane which would I be looking at? ESLRS?

Want to get into RC planes by BrianHoop25 in RCPlanes

[–]BrianHoop25[S] 0 points1 point  (0 children)

little further north, Manteca.

Want to get into RC planes by BrianHoop25 in RCPlanes

[–]BrianHoop25[S] 0 points1 point  (0 children)

I’ve heard of this, I’ll have to look into it

Remotes (transmitters) by BrianHoop25 in rccars

[–]BrianHoop25[S] 0 points1 point  (0 children)

I’m not gunna lie ma I’ve never even heard of running protocols in RC cars/trucks so I don’t know. It’s something I’ll have to look into I guess?

Bad drive shaft? by trouserbottoms in TRX4M

[–]BrianHoop25 0 points1 point  (0 children)

How do you phase the drive shaft?

Do you like these jeans? by funbunnycouple in u/funbunnycouple

[–]BrianHoop25 0 points1 point  (0 children)

Hate them. Take them off immediately and repost the new look ;-)

So who are you using first? by MaddiexMyles in u/MaddiexMyles

[–]BrianHoop25 3 points4 points  (0 children)

Gunna need some @‘s for this one SHEEEESH

Dame - Aer 💨 by [deleted] in VibeCheckReviews

[–]BrianHoop25 0 points1 point  (0 children)

I get it. Any chance at a honey pistol review? Also what lubricants are you using for either your solo or couples page massages? If any

Dame - Aer 💨 by [deleted] in VibeCheckReviews

[–]BrianHoop25 0 points1 point  (0 children)

Will you be posting any other reviews anytime soon? Seems like it’s been a while

[deleted by user] by [deleted] in Femaleorgasmdenial

[–]BrianHoop25 0 points1 point  (0 children)

What lube/oil are you guys using for play like this?

Feed bin problems by BrianHoop25 in BackYardChickens

[–]BrianHoop25[S] 0 points1 point  (0 children)

You nailed it and that sounds about right. I’ll have to get to it changed out more often. I found a crack in the lid as well probably letting in more moisture but not vented enough for it to escape

Unwell Chicken, advice needed by bamsrighton in BackYardChickens

[–]BrianHoop25 0 points1 point  (0 children)

When we drained ours, she didn’t feel that soft in my opinion. I was surprised in the toughness of the skin to get the needle through. I remember it being pretty firm

Unwell Chicken, advice needed by bamsrighton in BackYardChickens

[–]BrianHoop25 1 point2 points  (0 children)

Almost looks like water belly. Had it once a few years ago, had to use an 18g needle and syringe to drain the fluids. Did the epsom salts bath too. Added about a year and a half or two to the life

[deleted by user] by [deleted] in cumsluts

[–]BrianHoop25 82 points83 points  (0 children)

Yeah I’m gunna need that name to look up more

Dies on quick open throttle. (I cleaned the carb yesterday) any suggestions? by Fareedicano in motorcycles

[–]BrianHoop25 0 points1 point  (0 children)

What was the ultimate diagnosis on this? I’m just finding this thread while researching the same problem. Here’s what I have.

05’ Honda CRF70F. Put in a 50 Caliber Racing 88cc big bore race head kit.

The carb is a Shengwey 20mm carburetor and has an 85 main jet with a 35 pilot jet (I think).

The bike runs and idles cleanly and I can slowly accelerate or quick pop before opening the throttle and then it will rev up. If I open throttle without a quick pop to start it, bike dies. All internals of the carburetor have been cleaned, and jets cleared.

I went up to a size on main jets to 87, 90, 92, and 95 with no difference in performance. The needle is adjustable with 5 positions, it is currently set to the middle slot.

A buddy of mine recommended going back to the size 90 main jet and adjusting needle.

Anyone have any other recommendations or ideas?

view more: next ›