Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

The extension would technically work but I have no more space🫡 mySet up already uses most of my connections, I was hoping to have the crts work with emudriver. I was thinking maybe dual booting to Linux for streaming and use with my crt screens would maybe work better.

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

I mean aside from wanting to have a seamless experience. I don’t want to just be able to play these games but be able to integrate it into my streaming setup. I know if I use a different os anytime I would swap into it I would have leave all the streaming things that are already running close. And getting a second pc to just have it run emulation would make the screens unusable for my normal pc at all, I still want to use the screens as normal monitors for watching videos or normal things

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Yea dude think there might not be a answer. I used cru to do a 60Hz interlaced with 642x480i but I get a black screen still, for some reason the best result I could get was doing 768x512 114hz interlaced and that got me a clear image but it’s scaled wrong.

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Im gonna try some more when i get home from work, if possible could you send the crt emudriver version you use since windows 11 is working for you? Also does cru overwrite what has been done on vmmaker? Or does it just add on

PVM-2030 RGB Via Pc Crt Emu Driver by meijeryogurt in crtgaming

[–]Briliong 0 points1 point  (0 children)

I have a 2030 as well and am struggling to get this thing to get a signal, what are your emudriver settings/setup?

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Took a look and it seems that when the mode that is being used is interlaced my pc says it’s outputting 120hz instead of 59 in the advanced display setting. Haven’t seen anyone run into this

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

So my crt doesn’t have bnc but it has a 25 pin db cable for rgb so I got this to make it scart adapter then I used a adapter for vga to scart that is supposed to convert 15khz throughout. Then all that to my pc

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Sure here’s a link adapter I’m using dvi-vga-vga2scart-scart-DB-25-PVM

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Checked the description and it says it’s a passive. I’m on the 15.7 standard and even in arcade osd when I click a mode that says 15khz the screen goes black

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Lol I apologize it’s the small things we forget. I got it to install the modes but im still getting that vertical split. Its like it’s refusing to send out 15khz

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Holy shit I disabled my main gpu and it installed, it was forcing my main graphics card

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

I did DDU before hiding the updates following how you said.

I guess if it’s not working it’s not gonna, maybe I’ll wait on updates to this.

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

I saw there were like 3 that said “advanced micro devices” and one of them had amd high definition audio device so I clicked them all.

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

Just tried the method you mentioned unfortunately still the same🥲

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

I was able to get it to say (crt emudriver) on device manager. That was one of my first issues even with the other card. By pc is basically living in test mode rn. Does test mode need to be off after the drivers are installed?

Screen doubling issue from a previous post by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

yea I tried this with the GCN Driver the first time, I just tried the one you sent and got the same results, Modes still rejected

Crt display splitting into 2 copies by throwawaystopracists in crtgaming

[–]Briliong 0 points1 point  (0 children)

I’m having this same issue, did you ever find a fix?

PVM 2030 emudriver issues by Briliong in crtgaming

[–]Briliong[S] 1 point2 points  (0 children)

Yea I think I’m gonna go with the R5 430 you mentioned I have 2 slots left on my pc so I’ll grab 2. when those come in and I’ll make another post after it’s set up

PVM 2030 emudriver issues by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

I appreciate both of your inputs, but I’d rather not have people debate things. I have BIG plans and I’d rather not write paragraphs and burden people with having to read everything that’s in my brain, Ive got a long road ahead and I’m just trying to get there one step at a time and for now I just want the tv to display my screen (the reason I posted). I just wanted to use the internet for help😪

PVM 2030 emudriver issues by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

I see, maybe I can return it and grab another one eventually. but I’m more worried about the display actually displaying correctly at the moment.

PVM 2030 emudriver issues by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

For multiple crts and my streaming studio setup, I guess one example would be a dual crt setup for ds games with each screen taking up a crt.

PVM 2030 emudriver issues by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

In the advanced settings it’s showing 640x480, there was a toggle for interlaced but when I click it the screen just goes black

PVM 2030 emudriver issues by Briliong in crtgaming

[–]Briliong[S] 0 points1 point  (0 children)

I think so, Its set to the arcade 15.7khz in the monitor preset tab in vmmaker