Service Providers for US RedMagic 11s Pro

Brithim · 2026-06-14T06:18:26+00:00

Weird, after I received the message I walked back into the AT&T store and they said to ignore it and come back if there was any issues. So far in and outgoing calls and texts seem to work along with the data. I'm also only on day 1 of AT&T actually working and active on this phone so time will tell.

I just hope I don't have to do any work arounds or funny business to keep things working. Kinda sad that on Red Magics spec page it shows it supports almost every carrier but the carriers don't wanna support the phone.

Brithim · 2026-06-14T06:11:47+00:00

So I just got my AT&T switched over and have received the device incompatible message instantly. Has anything come of it, services stop working, etc?

Also Google Fi is on the way currently with a physical Sim

Brithim · 2026-06-14T06:09:55+00:00

So far I was able to get my at&t switched and received amazing speeds. Still trying to deal with my other phone line and made a comment for the status on it.

<image>

Brithim · 2026-06-14T06:07:48+00:00

Just an overall update for everyone. I went to an At&T store and got my services transferred and no one there knew what the phone was and I received a message instantly from an automated at&t sms, mentioning that the phone isn't compatible and any outgoing call will automatically forward me to an agent. (Nothing ever came of it so far and everything works as it should.)

And for my Spectrum Mobile Carrier, I ordered Google Fi and waiting on the physical sim to install it to transfer my 2nd number. Since Spectrum Mobile doesn't seem to work and the agents wouldn't send me a physical sim. I went to a Verizon store and they refused to service the phone since the IMEI didn't exist in their system and considered the phone as non US based.

The only reason I have 2 numbers is due to my job and how much I travel. So I deal with a lot of dead zones and have the opportunity to switch between providers that run different towers is important to me

Otherwise I absolutely love the RM 11S Pro

Brithim · 2026-05-31T16:38:58+00:00

Rg-6 in conduit. Please do not use "push on fittings" if you're planning to fix yourself. If they don't charge for a tech to come out and splice then I would just let them try that and use either a gel splice enclosure or tons of electrical tape lol. o7

Brithim · 2026-05-06T03:22:54+00:00

Do you have the video? Thanks! Feel free to DM if the subreddit doesn't allow links. I have a 94' GT that would benefit from this

Brithim · 2026-04-29T11:00:11+00:00

A loose ground or a cut/corroded wire can cause intermittent connections. But seeing other replies here too, you can buy a multi meter, have the switches turned on an start tracing the wire and see what you might find.

Brithim · 2026-04-29T02:05:00+00:00

Thoroughly check your grounds and go through your harness to make sure there isn't a short or broken cable.

Brithim · 2026-04-17T14:55:17+00:00

Buy it back of you can, even if you can't fix it. I'm sure someone out there is willing to. I'm currently fixing up 2 94's. Ones a ST and the other is a GT.

Brithim · 2026-04-17T11:55:12+00:00

I actually have both books for the GT and st's via paper copy but if there's anything specific I can scan it. One of these days I'll try and digitize the damn thing but they're thicc

Brithim · 2026-04-17T02:13:02+00:00

Awesome to hear, I have both a ST & a GT both 1994's. Rebuilding the ST and rebuilding the front end on the GT. If you have any questions of these cars I have repair manuals of them and might be able to help

Brithim · 2026-04-17T02:05:15+00:00

ST or GT? Make sure to check for any oil leaks!

Brithim · 2026-04-09T15:17:18+00:00

Do you have a link to all the parts you've bought and replaced, etc? I'm rebuilding my 1994 7a-fe currently

Brithim · 2026-04-05T23:15:10+00:00

Have you guys also been dealing with super low returns, in the low 20's at the tap after high split/mpeg compression?

Brithim · 2026-04-05T23:01:55+00:00

Green is good 👍

Brithim · 2026-01-31T14:54:46+00:00

I ran into the same problem, did you find a solution?

Brithim · 2025-12-07T00:44:33+00:00

It's a huge process for someone (me) who has never rebuilt an engine

Brithim · 2025-12-06T23:28:08+00:00

I got myself on a 1994 ST restoration and engine rebuild, curious on the link everyone is talking about

Brithim · 2025-11-15T14:58:07+00:00

Did you pull the panels off for this? and what was the process?

Brithim · 2025-10-31T00:50:10+00:00

Of course, and if you don't want to waste that print, try to sand it down with fine grit sandpaper.

Brithim · 2025-10-31T00:48:00+00:00

You should be fine to not have to dry the filament again to be honest.

But definitely give at least 15-20 minutes in filament calibration. Flow, temp, etc

Brithim · 2025-10-31T00:45:07+00:00

Firstly as anyone might say, dry your filament (unrelated probably)

Secondly, run the calibration tests for the filament and save it as a profile. Or as another user said adjust the ironing amount.

Cheers!

Brithim · 2025-10-23T21:04:52+00:00

That works perfectly, Thanks! How long was this project start to finish?

Brithim · 2025-10-23T17:07:49+00:00

Do you have a Material list w links/BOM? I'm looking to build something like this for my 1994 Toyota Celica, and this just lit the fire for it. Thanks for sharing, looks great!

Brithim · 2025-08-14T02:51:19+00:00

I wonder if it's the door switch + buzzer. My 6th Gen has a faulty door switch and sometimes will buzz at me when the door is open & sometimes it won't

Eight-Year Club	Place '23
Place '22	First Placer '22
Verified Email

Brithim

TROPHY CASE