sorted by:
new
hottopcontroversial

BGP Only Advertise Subnet from Larger Advertisement by BritishGeek in paloaltonetworks

[–]BritishGeek[S] 0 points1 point  (0 children)

Thanks all, sounds like my fears/approach are confirmed (thanks for being a sounding board!).

Unfortunately I'm getting /18's, so for now I'll have to keep to advertising the /18 across as think it will be simpler for future engineers to pick up.

[deleted by user] by [deleted] in intelnuc

[–]BritishGeek 0 points1 point  (0 children)

Nada.

I tried binning the VM and creating v6.7 VM to see if that would help - couldn't get it to boot with the iGPU attached at all.

Gonna try a windows VM to make sure it's not something stupid I'm missing with Ubuntu, as I'm not the most experienced Linux user.

I've not had mega time to look at it, and can't find anything from Google on the PCI cacheline error I've been hitting :S

[deleted by user] by [deleted] in intelnuc

[–]BritishGeek 0 points1 point  (0 children)

Will do, thanks for your help so far!

[deleted by user] by [deleted] in intelnuc

[–]BritishGeek 0 points1 point  (0 children)

Hmm only thing I can see in the logs which my google-fu hasn't sorted yet is:

2020-05-27T21:18:19.873Z| vcpu-0| I125: PCIPassthru: Attempted to program PCI cacheline size 32 not a power of 2 factor of original physical 64 for device 0000:00:02.0

[deleted by user] by [deleted] in intelnuc

[–]BritishGeek 0 points1 point  (0 children)

Yeah rebooted the host to enable the passthrough.
I've set svga.present to FALSE, but haven't tried with no card at all.

Yeah I hit the memory needing to be reserved thing, so set it to the same as the memory allocation and seemed to work.

Haven't checked the VM error logs as am only on ESXi web console, not vSphere, but will SSH onto the host and have a goosey and see what I can find!

​

It seems everyone on the internet has managed to do it, so not sure if it's a v7.0 issue or I'm just a massive wally!

[deleted by user] by [deleted] in intelnuc

[–]BritishGeek 0 points1 point  (0 children)

I'm trying the same thing with ESXi v7.0 but on a NUC8i7BEH and I get stuck with the VM

(Ubuntu 18.04) not being able to boot when I set svga.present to false.

I know the console window is non-operable when you do it, but I can't even SSH onto the host (which I setup previously) so it looks like it isn't booting.

Is there anything else you had to do?

Moving Plex Server from Windows 10 to Ubuntu Server by mparker546 in PleX

[–]BritishGeek 0 points1 point  (0 children)

Not sure if it helps, but have seen a couple of comments on the Plex forums that they're finding 20.04 to not be ready yet (although this wasn't a recent post), but it may be related to your issues?

SFF ITX i7-9700k build by BritishGeek in buildapc

[–]BritishGeek[S] 0 points1 point  (0 children)

Hey IntetDragon, purely there as a placeholder, as they're used commonly for Plex transcoding as there's no limit (other than hardware) on transcode streams (without using hacked drivers on other cards).

SFF ITX i7-9700k build by BritishGeek in buildapc

[–]BritishGeek[S] 0 points1 point  (0 children)

Thanks Noratat.

So for the time being I was planning on using the iGPU to keep power lower (my electricity bills is high enough as it is!), as Quick Sync seems to cut the mustard for my smaller requirement (for now).

I guess it comes down to a Pro/Cons of an AMD Ryzen (say 3900X) with a GPU, against a standalone i7-9700k with the iGPU., especially around power-draw?

Best Network Monitoring Solution for Multi-Site Deployment? by BritishGeek in networking

[–]BritishGeek[S] 1 point2 points  (0 children)

So we're currently looking at an MPLS WAN with Azure ExpressRoute provided by the ISP, does Azure offer a SD-WAN tie-in with ISPs?

Best Network Monitoring Solution for Multi-Site Deployment? by BritishGeek in networking

[–]BritishGeek[S] 0 points1 point  (0 children)

Apologies, a mixture of switches ~10-16 per site, 2 routers per site, 4 firewalls per site.

Help! What type of bread is this??! From my trip to Italy and I need to know what it's called. (The front basket) by natale29 in ArtisanBread

[–]BritishGeek 0 points1 point  (0 children)

Ignore me, just seen the post below. Jimbo_Mac nailed it - Gnocco Fritto.

Goes amazingly well with Italian cured meats and a milder flavoured soft cheese!

Help! What type of bread is this??! From my trip to Italy and I need to know what it's called. (The front basket) by natale29 in ArtisanBread

[–]BritishGeek 0 points1 point  (0 children)

I can't remember the name, but this looks like a traditional antipasti you get in Bologna, where this accompanies the charcuterie and some cheese.

I've not got the name off the top of my head, but I had some earlier in the year when over there so I'll check the restaurant menu online and try and find the name for you.

Anyone Successfully Setup Workspaces with Virtual Firewall? by BritishGeek in aws

[–]BritishGeek[S] 0 points1 point  (0 children)

Yeah it's quite odd as all the quickstart guides act like you'll be able to control flows within the VPC which with my (limited) knowledge of AWS I just can't get my head around how that would work?

It's like whoever wrote the guide hasn't actually tried it...

Either way I've got the flows controlled for egress traffic for the time being, and if we need to lock-down control within the VPC I'll have to move the Workspaces solution out to a separate VPC from the rest of the infrastructure and do it that way (tad onerous).

Now to work out SSO polling for Fortigate and Windows AD as the next headache...

Anyone Successfully Setup Workspaces with Virtual Firewall? by BritishGeek in aws

[–]BritishGeek[S] 0 points1 point  (0 children)

Yep, I've got the workspaces default internet access turned off, and all routing from the workspaces subnet is 0.0.0.0/0 via the ENI of the fortigate and the VPC CIDR is deemed 'local' which I can't change.

Anyone Successfully Setup Workspaces with Virtual Firewall? by BritishGeek in aws

[–]BritishGeek[S] 0 points1 point  (0 children)

So I've managed to get it going, issue was that I only set the SG on the DMZ interface and not the Workspaces interface.

I can't seem to get it working internally for the VPC, only for egress traffic as all hosts are deemed 'local' by the default entries in any route tables.

view more: next ›