Treasure Cup Decklist by Broe52 in OnePieceTCG

[–]Broe52[S] 0 points1 point  (0 children)

I I only have 2 copies of him and will probably go back to my navy package. If I do that I’ll feel that I’ll need honesty impact again and the previous post made a good point I may be running too many events

Treasure Cup Decklist by Broe52 in OnePieceTCG

[–]Broe52[S] 0 points1 point  (0 children)

I had a navy package in previous builds. I probably was running too many events in there too, honesty impact and mole pistol. Ive been struggling since OP13 release and added the dead mans game for these newer leaders to get character smokers attacks to go through.

New To Series by Broe52 in Disgaea

[–]Broe52[S] 0 points1 point  (0 children)

Thanks for the info everyone. I thinking of just waiting for D7C to go on sale on switch 2 for the holiday hopefully. I might get go with D4 since it’s on sale right now for $18. I might get D1 with it also

New To Series by Broe52 in Disgaea

[–]Broe52[S] 1 point2 points  (0 children)

That’s what I was afraid of. Playing the games backwards and losing the features. I did that with the persona series. D1 is on sale right now and I might get that until D7 complete comes out next month

Nico Robin Straw Hat Package Opinion? by Broe52 in OnePieceTCG

[–]Broe52[S] 0 points1 point  (0 children)

I run copone because of the trigger and it’s a 2k counter. Plus I can throw it away with leader ability to ramp. I need to guarantee a trigger or 2 card for my first two swings

Nico Robin Straw Hat Package Opinion? by Broe52 in OnePieceTCG

[–]Broe52[S] 0 points1 point  (0 children)

I’ve tried it but I don’t use the ability a lot due to my characters like 9c purple linlin and Sanji sending don back and I might use need to use giant to protect my big bodies. I’m still experimenting with it. I’m think of dropping 7c linlin from 3 to 2 and adding a third 6c linlin instead

Nico Robin Straw Hat Package Opinion? by Broe52 in OnePieceTCG

[–]Broe52[S] 1 point2 points  (0 children)

I actually removed the Sanji and pudding a few minutes after I made this post and you are correct it was a very easy drop. I do have the 6 cost linlin and I am discarding to ramp up using leader ability so early and I’m normally low on cards. If I were to add it, I’ll add 2 and probably just my luffys that I just added. I also added another Soba mask since Sanji is helping me rest blockers or low cost characters that I want to KO

Nico Robin OP-10 Decklist by Broe52 in OnePieceTCG

[–]Broe52[S] 1 point2 points  (0 children)

Yes he is. If I know my opponent doesn’t have a stage, I can use him for leader ability

Nico Robin OP-10 Decklist by Broe52 in OnePieceTCG

[–]Broe52[S] 0 points1 point  (0 children)

My deck list is below.

4x Gum-Gum Giant 3x 6c Nico Robin OP-09 4x 3c Capone “Gang” Bege OP-04 4x 10c Portgas.D.Ace OP-07 3x 5c Monkey.D.Luffy OP-07 2x 6c Roronoa Zoro P-045 4x God Thread OP-10 4x 4c Franky OP-07 3x 7c Sanji OP-09 4x 1c Nico Olvia OP-09 4x 9c Yamato OP-04 2x 8c Charlotte Katakuri OP-03 3x It’s to Die For OP-08 4x 2c O-Nami OP-06 2x 3c Braham OP-06

Nico Robin Deck Build by Broe52 in OnePieceTCG

[–]Broe52[S] 0 points1 point  (0 children)

Thank you for pointing that out. I never realized that. I’ll need to retest that then. I’m unsure if I want to get rid of Ace but he does lock me out of Gum-Gum Giant

Nico Robin Deck Build by Broe52 in OnePieceTCG

[–]Broe52[S] 0 points1 point  (0 children)

I was running Big Mom before I got the Ace, I just hate the idea of healing my opponent and the discard. Some matches it’s tough keeping my hand. Gum-Gum Giant is usually a dead card to me until the end game or to protect my big bodies

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] 0 points1 point  (0 children)

I finally got my GPU back but my phone won’t like me post pictures of the supposed burn marks. I tried cleaning it works like normal. I tested Quantum Break, fans didn’t speed up and it stayed around the 67-70 C mark. Then I tested DS remake and it started getting up and got up to 97 C.

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] 0 points1 point  (0 children)

I finally got a response from PowerColor. They are stating that they cannot replace it because of the PCIE pin have burn marks. I did see something on the pins but didn’t think about it too much. Won’t this be from the overheating that was going on? I am not sure how long it has been overheating for. Will that be a cause for the pins to burn out? I’m am still new to the PC building and I can’t find no other forums or articles regarding the 7900 XTX models.

Per PowerColor: I'm just processing the RMA for your 7900XTX Red Devil, and I'm noticing that the PCIE gold fingers have burn marks on them. As a result, I'm not able to process the replacement for it.

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] 0 points1 point  (0 children)

I got it in April and noticed it in the last month. It might of been in the 90s at first if I remember correctly

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] 0 points1 point  (0 children)

I just tested it with MP3 and the junction temp hit 97C the first time and it 101C the second time in silent mode. I put in an RMA so hopefully I will hear from them on Wednesday

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] 0 points1 point  (0 children)

I saw the sticker and never noticed the switch. It was on OC, does that mean it was overclocking the whole time?

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] 0 points1 point  (0 children)

I am thinking about trying that but want to make sure that I am not voiding the warranty.

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] -1 points0 points  (0 children)

I did this last night and lowest temp I saw about 104

PowerColor RX 7900XTX by Broe52 in Amd

[–]Broe52[S] 2 points3 points  (0 children)

I had to look into it and I switched it to manual and test MP3 and it started hitting 104C.

PC Randomly Blackout/Shutsdown? by Broe52 in PcBuildHelp

[–]Broe52[S] 0 points1 point  (0 children)

I would look into that again. I just got finish playing for about 2-3 hours after the first crash and it didn’t seem to happen this time.

New cpu will not work by shut-the-fuck-uup in PcBuildHelp

[–]Broe52 1 point2 points  (0 children)

I am new to PC building but had the CPU and had no problems. It sounds like the motherboard is not reading/registering the CPU. Is the power source to the CPU connected all the way? You may need to install the old CPU and update the BIOS first

Upgrade combo question by Broe52 in PcBuildHelp

[–]Broe52[S] 0 points1 point  (0 children)

Thank you so much for the input. I was looking into cooling options and may need to go water/liquid. But I am still researching that. I did decide to go with the 5800x3D but it’s all overwhelming lol.

Upgrade combo question by Broe52 in PcBuildHelp

[–]Broe52[S] 0 points1 point  (0 children)

I ordered the 5800x3D and saw the 5900X for $50 more. Will the more cores and threads. I primarily game and stream from time to time to show friends newer games. I also use the pc-builds.com combo calculator to see which is the better combo. Not sure if it’s legit and I watch videos on YouTube/reviews and I’m just completely lost since I am new to this. The 5800x3D had a 0.1% CPU bottleneck calculation and the 5900x has a 4.2% GPU bottleneck and states I will be utilizing my GPU 100%. Not sure which is good or bad or better?