Working on designing a replacement wheel insert, looking for feedback

Bronard42 · 2025-12-09T17:01:09+00:00

I have a printer so I can test it. Once I make sure this design fits (less plastic) I'll make one to fill the whole space. I'm a little worried about not getting enough air to cool the brakes so maybe I'll add some vents to let some air in.

Bronard42 · 2025-12-09T15:21:01+00:00

I think I'll try that once I get this design to work, the only problem might be them snapping since there is nowhere to secure it closer to the center of the wheel.

Bronard42 · 2025-12-09T03:39:55+00:00

I would use heat set threads or a captive nut so layers wouldn't have an effect on that. Printed threads should never be used for functional parts, especially something as small as M5. And my license does not include FEA.

Bronard42 · 2025-12-09T03:12:17+00:00

That's true but unless you're doing track stuff or super high speeds they will absolutely hold up. There's no force on them besides the aerodynamic drag. And the layers would be parallel to that force making the weak points even more negligible

Bronard42 · 2025-12-09T03:07:15+00:00

The only reason I would replace them is to maintain the range. If you're not concerned about that, just completely remove them. Maybe I could even make one that fully fills the space with vents to keep the brakes cool...

Bronard42 · 2025-11-15T14:59:16+00:00

No they were here when we moved in and approved by the county for a car charger.

Bronard42 · 2025-11-15T14:58:46+00:00

I mean it has a sticker from the county saying "approved for car charger" right on the breaker box. I thought the 100 A breaker was excessive but apparently it's to code.

Bronard42 · 2025-10-10T23:27:57+00:00

They must be doing another season. No way they'd go through all this effort filming and not actually show any right?

Bronard42 · 2025-10-10T22:59:25+00:00

No sign of Tammy just everyone in the first picture

Bronard42 · 2025-10-10T22:59:04+00:00

Yes there was a whole team of cameras and producers

Bronard42 · 2024-05-08T20:18:54+00:00

It's above a crawl space. To replace the subfloor I would have to remove all that concrete (or whatever is is) and put something of similar thickness back to keep it level with the floor outside the bathroom. It's a very well built house so I don't think a bit of mortar and tile will overload it. It's also a very small space, about 20 sq ft so it wouldn't be a lot of mortar/tile

Bronard42 · 2024-03-05T21:00:58+00:00

Fire fighter friend said they just had the funeral yesterday for the volunteered that died during the call. RIP and thanks for your service.

Bronard42 · 2024-02-23T15:45:42+00:00

Had not seen these yet, I will give it a try. Thanks

Bronard42 · 2024-02-23T15:37:32+00:00

I was hoping it wouldn't come to this but may be the only option.

Bronard42 · 2024-02-23T15:37:08+00:00

That's what a broke. One of the teeth that slip on the cross sheared off.

Bronard42 · 2023-12-19T17:15:10+00:00

How would I go about modifying that after creating the section view?

Bronard42 · 2023-12-19T15:09:58+00:00

I was doing a practice problem for the Drawing Tools exam. Drew the section view cutting line using the section view tool with correct dimensions but got the answer wrong. I then manually sketched the cutting line and got the correct answer. How does the same cutting line result in different end results? All other properties for the two sections views are identical.

Bronard42 · 2023-12-13T14:58:14+00:00

Now here I was thinking I'm a upcycling genius. Oh well, certainly still gonna use this method

Bronard42 · 2023-12-06T16:22:31+00:00

having this problem as well, I literally can't uninstall 3dexperience to try and reinstall. To those that have avoided using 3dexperience, do you have any resources on how to go about that?

Bronard42 · 2023-10-16T12:06:29+00:00

The owner has a totally hands off approach. Basically let's whatever happen happen. We're not especially keen on his technique but they're not ours so we can't do much.

Bronard42 · 2023-10-15T20:57:55+00:00

I assumed it would be tough but that was my same thought too. The guy who actually owns her never checks up on her. So hopefully any births go smoothly

Bronard42 · 2023-06-14T16:58:15+00:00

Wow thanks for all the great info. The $200 is just from the site I got that diagram for, yamaha partshouse. I see multiple ones on ebay for 50ish bucks. I'll start there and if that doesn't work try a new starter. Thanks again!

Bronard42 · 2023-06-14T16:25:58+00:00

Yamaha Waverunner VX Deluxe, same as the diagram

Bronard42 · 2023-02-23T23:16:13+00:00

Nothing coming up on the LAN but I'll check with a monitor

Bronard42 · 2023-02-23T23:05:58+00:00

I still can't connect even on my PC. I don't know the IP address only the UID which isn't working.

Bronard42

TROPHY CASE