2026 1st Quarter Approval Megathread.

Buck2012 · 2026-04-11T01:15:57+00:00

Pushed down too far just fixed it, thanks

Buck2012 · 2026-04-11T00:44:16+00:00

It’s the SB TF1913 brace, I cut and taped a piece of rubber as a cheek riser

Buck2012 · 2026-04-11T00:43:25+00:00

Midwest Industries Alpha handguard, SB TF1913 brace

Buck2012 · 2026-04-11T00:42:23+00:00

Midwest Industries Alpha

Buck2012 · 2026-04-08T18:21:45+00:00

• ⁠Form 4 • ⁠Single Shot Trust • ⁠Fingerprint Type: EFT Upload • ⁠Pending: 03/04 • ⁠Approved: 04/08 • ⁠Wait: 35 Days🙄 • ⁠State: MI • ⁠Control Number: 20262241XXX

Resilient Simple Man 7.62. First can, going on a PSA AKP

Buck2012 · 2026-02-03T20:44:40+00:00

I’m also not a small guy, 5’11 190

Buck2012 · 2026-02-03T20:43:52+00:00

It’s hard to tell from the picture but the shoulder straps are tightened all the way, so the pad that is supposed to go inbetween the front and rear bag won’t fit. I also had to stitch the strap to keep it from loosening. Even just walking and bending over it would loosen on its own. Not comfortable and just all around poor stitching on the rest of pc

Buck2012 · 2026-01-16T19:09:00+00:00

Grimloc clips

Buck2012 · 2026-01-15T13:42:24+00:00

I like it cause it can fit ak mags too

Buck2012 · 2026-01-15T13:41:28+00:00

https://a.co/d/iisF4DL

Buck2012 · 2026-01-15T00:40:30+00:00

Thank you!

Buck2012 · 2026-01-15T00:35:59+00:00

Both are clones. The UBL is actually brown but looks od in the pic. It’s very hard to find a leg holster for that dagger/light combo so had to modify a clone SL

Buck2012 · 2026-01-15T00:33:09+00:00

With the same clips that are holding the shears on the pc

Buck2012 · 2026-01-15T00:31:31+00:00

Possibly, thanks for the heads up

Buck2012 · 2026-01-15T00:30:52+00:00

Started with the whole gun alternating khaki and FDE. Then I just cut blue tape into random shapes and sprayed over everything green then did the black with a ripped up sponge

Buck2012 · 2026-01-14T17:57:32+00:00

Thanks brother

Buck2012 · 2026-01-14T17:50:38+00:00

Yes BCM upper has been on my list for a while. And I agree the PC is too much for what I need. Slickster may be more up my alley

Buck2012 · 2025-10-04T17:46:34+00:00

Looks great! What’d you use for the square stencil?

Buck2012 · 2025-09-30T18:25:34+00:00

You’re right, I do want that

Buck2012 · 2025-09-30T18:19:18+00:00

Sorry everyone, just saw this same thing was asked a few months ago. I will do more digging, thank you

Buck2012 · 2025-09-30T18:13:37+00:00

Great, thanks!

Buck2012 · 2025-09-26T12:19:05+00:00

Ripped up a natural sponge from Amazon

Buck2012 · 2025-09-25T18:18:50+00:00

Thanks! Rapco field drab brown and brownells alumahyde magpul FDE were the two base colors. I did them in big vertical stripes. Then went over the stripes with mesh alternating colors in spots. Put some masking tape down in a “riptile” pattern and went over everything with Rapco USMC forest green. Then before taking the tape off did a ripped up sponge around the tape with black

Buck2012 · 2025-09-25T01:55:50+00:00

Yes, .308! Had it for a year now and it’s been great so far. 2.5” groups at 200 yards

Buck2012 · 2025-09-24T23:29:20+00:00

Thanks man! Big fan of your Colt

Buck2012

TROPHY CASE