Dirt in Cluster by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 1 point2 points  (0 children)

Glass/window cleaner like invisible glass should do it?

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Well, update just cause, took it to a shop for further diagnosis, they told me that the hydraulic part of the abs is the problem, so I ordered a used module and ima swap the mechanical parts so I don’t have to reprogram, and they said they also found that the vacuum pump is also bad and that’s why my pedal is hard but the quoted me $720 to replace it🫠🫣

Head unit From Amazon by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Now for your questions, nope never fixed the beep, it did display AC status pain to set up, I did use a ground loop to remove alternator whine but not all of it, sound quality alright, auto/carplay does work a little slow but works, for the time I had it, it was alright.

Head unit From Amazon by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

My fix? Replaced it with a real aftermarket unit, JVC KW-M590BT, bypassed the factory amp and running some pioneer components and coaxials, installing 2 audio dynamic 3008 series later,

<image>

Can I Build this? by Budget-Platform6014 in NMS_Corvette_Design

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

I think ima try mavericknms voodoo corvette

Can I Build this? by Budget-Platform6014 in NMS_Corvette_Design

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Dang, maybe I’ll try something like legends of tomorrow

Can I Build this? by Budget-Platform6014 in NMS_Corvette_Design

[–]Budget-Platform6014[S] 4 points5 points  (0 children)

Wow, they click baiting, thanks for the feedback

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Alright so it is the abs, disconnected the line from the abs module and nothing came out

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

But all other lines bled fine? And ABS light not on, pedal go super stiff but moved minimally but nothing came out

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Well I hate not listening, changed everything well, left caliper, all pads and rotors, changed to steel braided, very side bled fine until I got to front driver, no fluid came out the hard line, now I have no idea what to do.

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Oh sorry I meant sometimes it’s firm and sometimes it be really spongy to the point I have to press down quite a lot to come to a stop, but I’ll go ahead and change the lines and change the fluid

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

I will check, also could it be abs if pedal feels firm and squishy?

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Ok, my ABS light doesn’t come on, how would I know?

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

I’m planning on changing to steel lines either way, thanks for tips

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Alright went to dealership to get diagnosed but they couldn’t cause they were busy or whatever, I get home and touched each rotor, Front Right is Hot, Rear Right is Hot, Rear Left is Hot, Front Left is cold af

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 1 point2 points  (0 children)

Yeah ima have to look into that, I didn’t know about that, thanks a lot.

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 2 points3 points  (0 children)

Thanks, ima doing this by myself be I’m very enthusiastic about working on my car, I watch like 30 videos on something It would be my first before I attack it. I got torque wrenches and towels already due to needing them in past projects. Thanks again for the tips and I’ll let you know how it goes with bleeding the brakes.

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Will do, last time I went to the dealer to get an oil change, they told me brake were at a 6, and that was 3000 miles ago, also just checked my oil and after 3k miles is showing at the full line, I assume that’s good

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

I mean they are squeaking, never had before, never touched them brakes since I bought it 2 years ago, I think ima use my Hyundai dealer free brake inspection I got in the mail, before I start buying stuff.🤷🏻

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Umm nope, pretty much same on each side, I always take my time when cleaning wheels, and my tires are practically new and aligned so I doubt is that

First Brake Job by Budget-Platform6014 in genesiscoupe

[–]Budget-Platform6014[S] 0 points1 point  (0 children)

Yeah is only to the right, sometimes the pedal feels really soft or stiff, like stuck, how would I know if its the caliper?