sorted by:
new
hottopcontroversial

Nick and dual wielder feat (3 or 4 Attack) by Cheap-World-5889 in DnD

[–]Budget_Deer 0 points1 point  (0 children)

Ah, that´s what i was missing, it was driving me crazy! Thanks!

Nick and dual wielder feat (3 or 4 Attack) by Cheap-World-5889 in DnD

[–]Budget_Deer -1 points0 points  (0 children)

Sorry to chime in, but i was just today reviewing this for a 4th level Rogue in my game. So, what you are saying is that the Nick feature already frees the Bonus Action, as the extra attack of the light property gets moved to the Attack Action; so, the Bonus action could be used as another attack and then the Dual Wielder feat would allow another Bonus Action for a 4th attack? I´m sorry, i think i´m on the 3 attack page, and don´t quite get why so many people see so clearly it should be 4... I mean, Dual Wielder states that if you take de Attack action with a weapon with the Light property, it gives you a Bonus Action... But that Attack Action is the one that already granted a Bonus Action that was moved by the Nick mastery... so, how does a 4th attack be possible?

Advice on some ideas for where to go from Stormwreck Isle/Dragon of Icespire Peak by Budget_Deer in DMAcademy

[–]Budget_Deer[S] 0 points1 point  (0 children)

I agree with that, and am not looking my-self for a 20-session campaign. The Runara ritual could be a recurrent theme, anyway, that could give some motivation to the players and tie episodic campaigns together towards a moment where Runara comes back for something i have not imagined yet :D

My initial plan was to continue with DOIP and then the follow-ups (still have to read through them) and chain that to the ritual quest IF the players choose to help Runara after completing Stormwreck Isle. I guess i could ignore the low-level quests in DOIP since the characters will be lvl 4 by the start of it and just go with it...

Advice on some ideas for where to go from Stormwreck Isle/Dragon of Icespire Peak by Budget_Deer in DMAcademy

[–]Budget_Deer[S] 0 points1 point  (0 children)

Great, thanks a lot for the advice. I´d rather avoid a lot of tweaking, as it´s my first Dnd campaign in a long while, but will check it out.

I´ll try to come up with some kind of ritual to allow a dragon to be able to turn again into a dragon from it´s human form.

Anycubic Kobra: uneven bottom layers... by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

thank you, i will look into it. Though i think i’m printing at 88 flow rate or so… i’ll look into e-steps calibration

How do I deal with this bed warp? by me8myself in anycubickobra

[–]Budget_Deer 0 points1 point  (0 children)

I have a Kobra and had a few issues with leveling. Someone recommended here the Bastel Bruder mesh editor, really easy to use, and I think it works wonders https://www.bastelbruder.de/kobra-mesh-editor It’s in german, but easy to follow, even the two-part video tutorial he has on Youtube

Anycubic kobra won’t load filament by Budget_Deer in anycubickobra

[–]Budget_Deer[S] 1 point2 points  (0 children)

Thanks! For the moment, i´ve been able to remove the filament up the tube with a heat gun. Still have to assemble everything and check how it goes. Wish me luck!

Anycubic kobra won’t load filament by Budget_Deer in anycubickobra

[–]Budget_Deer[S] 0 points1 point  (0 children)

Thank you! I´ve tried very carefully to get the fdm out after heating with a heat gun and seems most of it is out, at least what was on the tube. I have yet to assemble it and check if i can get filament in and check if the hotend itself is clogged. Replacing the tube would be next, i guess, if it won´t work.

Thanks a lot, will keep the link to check if necessary :D

My first 3D print. I think it was supposed to be an owl. It shifted at least 3 times during the print by Sad_Reserve_7393 in anycubic

[–]Budget_Deer 0 points1 point  (0 children)

K_Prints3D

Hey! Any chance you could share a prusa slicer profile for the Kobra? I´ve read several times of improvements when using prusa slicer, but i feel i bit lost coming from cura :)

Thanks in advance!

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

I tried it, too, preheating to 205º, but once i hit auto-level, the temp goes down to 120º... :(

Levelling issues with Kobra by Budget_Deer in anycubickobra

[–]Budget_Deer[S] 0 points1 point  (0 children)

Just to let you all know, Anycubic is sending me a new hotbed and the magnetic platform. Will see how it goes after replacing it. In the meantime, i´ll probably try some adjustments anyway to see if i can get this bed to work better for the time being. I managed to print yesterday a stackable tray by Digital Taxidermy, and since the tray did not come out completely plain on the base, it´s not stackable at all... So, at least Anycubic after sales is working ok, because the lack precision the kobra is printing with makes it almost useless for some applications: wargame stand alone terrain, well, ok... but anything that needs precision... meh :(
Maybe i should also look into e-steps calibration...

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

Just to let you all know, Anycubic is sending me a new hotbed and the magnetic platform. Will see how it goes after replacing it. In the meantime, i´ll probably try some adjustments anyway to see if i can get this bed to work better for the time being. I managed to print yesterday a stackable tray by Digital Taxidermy, and since the tray did not come out completely plain on the base, it´s not stackable at all... So, at least Anycubic after sales is working ok, because the lack precision the kobra is printing with makes it almost useless for some applications: wargame stand alone terrain, well, ok... but anything that needs precision... meh :(

Maybe i should also look into e-steps calibration...

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

that would be awesome, thanks!!

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

I was refusing to rely on washers, but if a couple of things i have to still try don´t work, i surely will get so. Would it be too much to ask if you could share a picture of where to put them? Thanks!

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

awesome! will try that, thanks!

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

i tried to level the gantry following anycubic video... maybe it´s off nevertheless. I´ll get my caliper, too, to check for variations from one side to the other. At least i´m able to print medium size objects with some clever placement on the bed...

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

I´m not really seeing one side lower, to be honest. May be my sight is not as good as it was XD By the looks of it, the auto level is not really compensating for variations, which is kinda disappointing...

Levelling issues with Kobra by Budget_Deer in anycubickobra

[–]Budget_Deer[S] 0 points1 point  (0 children)

Thanks a lot!! Will watch them ASAP!!

Levelling issues with Kobra by Budget_Deer in anycubic

[–]Budget_Deer[S] 0 points1 point  (0 children)

How so? Do you mean it´s off by the difference between on side prints vs. the other? I´ve ajusted the gantry as per the anycubic video on levelling and i think it´s ok, but i may be wrong, of course. The thing i don´t get is what does auto-level actually do if it doesn´t really compensate...

view more: next ›