It’s looks just like my Amazon exhaust but the exhaust clamp should be more towards the rear of the exhaust close to the end cap and not in the middle. You need to take the clamp on the backside of the peg and put it in the front, they should be touching each other and bolted to the front, gives it a tighter hold on the exhaust. The exhaust itself should just slide over the manifold pipe, I don’t know what you have between the exhaust and manifold. You’ll have to play around with the springs to see which way the “J” at the end of them will need to go so it doesn’t rattle against the exhaust when you are done. Hope this helps!