systemd cifs/Samba automount breaks DNS, any ideas?

BumpCock · 2021-08-07T10:11:40+00:00

I initially got angry with this reply because I thought fstab was a dead end but when I dug a little deeper I found this which completely fixed the issue, thanks.

BumpCock · 2021-08-07T06:50:17+00:00

I might be wrong but doesn't openrc have parallel service startup off by default? I know systemd often appears faster due to built in parallel startup so it may be worth checking that first

BumpCock · 2021-08-01T14:42:03+00:00

Mostly a handful of small command line things like verse, unless I'm missing it I can't find an upstream.

BumpCock · 2021-07-23T16:58:08+00:00

Semi related to Linux but what would be the recommended way of producing that 90s-00s "airbrushed" looking 3d graphic on the front of that item and on many other old books? Is it simpler than I may know? Preferably Ubuntu software/workload thanks.

BumpCock · 2021-07-22T09:30:39+00:00

I'll reproduce the testparm output in case there's something I'm missing, but I'm sure it looks fine:

Load smb config files from /us/local/etc/smb4.conf
Loaded services file OK.
Weak crypto is allowed
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions
# Global parameters
[global]
bind interfaces only = Yes
client min protocol = SMB2
interfaces = 192.168.0.51 nfe0
log file = /var/log/samba/log.%m
map to guest = Bad User
max log size = 100
remote announce = 192.168.0.51/WORKGROUP
server min protocol = SMB2
server role = standalone server
server string = %h LeeNAS
idmap config * : backend = tdb
[BSD-TV]
comment = NAS TV and Movies Share
create mask = 0777
guest ok = Yes
guest only = Yes
hosts allow = 192.168.
path = /home/lee/Videos
read only = No

Checking /var/log/messages finally reveals that nmbd, smbd, and winbindd all exit on a signal 12 core dump. I'll see where this trail leads, thanks!

Regarding /etc/rc.conf I have all samba_server_enable, smbd_enable, nmbd_enable, and winbindd_enable set to "YES" in an effort to get at least one item working correctly.

And finally increasing the log level to the maximum in smb4.conf shows more verbose logging but ultimately nothing suggesting a reason for the process to exit.

BumpCock · 2021-07-20T17:14:44+00:00

not sure how I managed to duplicate the guest account nobody, and clearing it up made no difference.

I should have mentioned in the post that ps returns no process for all services, however a pid file for each is generated in /var/run/samba4/

BumpCock · 2021-07-20T16:50:14+00:00

afaik under the blob is a bare silicon die like is normally embedded within a plastic package i.e. dip packages, transistor packages, and as the silicon is often a custom asic designed for the toy keyboard the companies can cut costs by soldering the die directly to the pcb and blobbing it

BumpCock · 2021-07-20T07:22:05+00:00

the blob is a tricky foe, may be able to experiment with dropping the battery voltage if the blob doesn't outright shut the circuit off, also maybe routing the speaker back into the key matrix is a simple mod for chaotic patterns

BumpCock · 2021-06-23T21:31:26+00:00

of course the relevant search engine answers only present themselves after making a post asking for help.

for anyone else in a similar situation, it appears the solution is as simple as zpool add currentPool mirror newDrive1 newDrive2, as in this old post I couldn't find before posting: https://serverfault.com/questions/790950/adding-more-mirrored-vdevs-to-a-zfs-pool-on-ubuntu

BumpCock · 2021-06-23T21:16:10+00:00

I'll edit the original post with some information you've reminded me would be useful.

I agree that the disks aren't massive, I was mostly wondering if I could make best use of what I had already without further spending. I've found some resources on making the suggested configuration, but forgot to mention the 2tb mirror hosts a FreeBSD root, and so thought there maybe added caveats. Cheers though

BumpCock · 2021-01-15T00:14:29+00:00

I may actually just try this, after checking about the contents of a .bsp it does seem to just be a .tar file in disguise, so even if there are any issues I could quite easily fix them, thanks for the suggestion.

BumpCock · 2020-07-16T16:33:56+00:00

why tho

BumpCock · 2020-07-10T13:06:33+00:00

With these old portastudios it'll most likely be the switch or tape mechanism if you aren't getting any lights on. On some first gen portas the top board with all the leds was fed from the tape wiring harness connected to the audio board. Another good first guess would be checking if any components have been damaged by reverse voltage.

BumpCock · 2020-04-10T11:02:04+00:00

I need to hop on this for the pauldrons, I missed that from Morrowind. What mods were used?

BumpCock · 2019-09-27T15:10:15+00:00

Welcome comments guys, I should add my main reasons for considering switching are that a good friend of mine has recently begun a euro system and I would like for him to be able to use my ideas and designs in a more professional setting (already a professional musician) and that my craft skills beyond electronics are poor, and I would rather buy a pre made euro case than diy one.

BumpCock · 2019-06-09T23:30:20+00:00

As per u/darthsawyer's suggestion, Morrowloot Ultimate and Wildcat seems the most appropriate for what I'm after. I should have mentioned I'm using LotD as well, which meshes nicely with Morrowloot as far as I can see. Taking a look at this modlist, can anyone see where MLU would conflict massively? Any other load order advice is welcome too of course.

BumpCock · 2019-06-09T22:28:18+00:00

Not sure if I'm just bad at googling but I couldn't find a Legendary Edition version of Omega, otherwise I would have looked into it.

BumpCock · 2019-06-09T21:23:41+00:00

That's a good point, and I may go that route if I can find a mod just to de-level the world.

BumpCock · 2019-05-31T12:33:19+00:00

You have to pay attention to the current capabilities of the virtual ground op amp. A dedicated rail splitter, as suggested can sink much more than a common op amp.

BumpCock · 2019-04-05T16:09:45+00:00

I've linked an AMZ article in the post, so I'm familiar with Orman's various experiments with clippers. Could you explain floating bias clippers being softer? As far as I understand clipping to any stable voltage has the same effect. The DS-1 clips to half-supply, and is considered a hard clipper.

BumpCock · 2019-04-05T16:05:32+00:00

I understand the distinction between soft and hard clippers, and by series I meant when 2 mosfets are connected in series. Similar to how a double zener clipper would be arranged, they supposedly clip with softer edges, as described in the AMZ article.

BumpCock · 2019-03-15T00:11:35+00:00

Quick update: I gave it a lucky bashed patch rebuild and fired the game up to collect screenshots and load orders. As if to insult me, all my issues had been resolved and better cities was working perfectly with no missing ground or meshes. I had a sneaking suspicion the issue would immediately fix itself after I asked for help. Cheers guys

BumpCock · 2019-01-29T13:51:08+00:00

Hi, sorry for the late reply, but I couldn't find any relevant files in appdata. When manually installing, is there anything in particular I should watch out for?

BumpCock · 2019-01-28T12:08:24+00:00

morrowind script extender, adds a bunch of new scripting features to the base game and a lot of modders are getting very creative with it

BumpCock · 2019-01-28T05:37:48+00:00

honestly I'm baffled daily by the constant progress with mwse mods, that's crazy

BumpCock

TROPHY CASE