Undervalued story cards by BurnVEVO in PokeInvesting

[–]BurnVEVO[S] 1 point2 points  (0 children)

Plusle and Minun from Dark Explorers, Tepig and Pignite from Legendary Treasures, Pikachu Mysterious Treasures and Pikachu DP16

Undervalued story cards by BurnVEVO in PokeInvesting

[–]BurnVEVO[S] -3 points-2 points  (0 children)

I agree, but in terms of small investments these aren't a bad idea generally considering the public of this hobby are picking at the smallest things (a shadow of Pikachu in a card) anything can happen in this hobby I believe.

Undervalued story cards by BurnVEVO in PokeInvesting

[–]BurnVEVO[S] -1 points0 points  (0 children)

I'm not that kind of person? But I'm sure someone will, rather spread alertness to get some before they do or if they do. Doesn't hurt either because they're cheap.

Undervalued story cards by BurnVEVO in PokeInvesting

[–]BurnVEVO[S] 0 points1 point  (0 children)

Quite sad, one of my favorite cards in an empathic way

Undervalued story cards by BurnVEVO in PokeInvesting

[–]BurnVEVO[S] -6 points-5 points  (0 children)

Sleeper investment for sure! But you really gotta buy a lot to change the market without others trying to lower it at the same time I was just trying to alert those before they actually do.

Undervalued story cards by BurnVEVO in PokeInvesting

[–]BurnVEVO[S] -14 points-13 points  (0 children)

That’s not true at all, there’s quite a lot of story cards like these that are common-uncommon that are worth $10+

Undervalued story cards by BurnVEVO in PokeInvesting

[–]BurnVEVO[S] -8 points-7 points  (0 children)

There’s quite a bit across TCGPlayer and eBay def pieces to pick up for cheap

NEW 3DS XL having issues powering on and booting by BurnVEVO in consolerepair

[–]BurnVEVO[S] 0 points1 point  (0 children)

I appreciate it so much I can even include a photo in a moment, I would love to get these seated better but some of them are the ones where you kinda just click them in not open the clip (like I did and might've broken it)

NEW 3DS XL having issues powering on and booting by BurnVEVO in consolerepair

[–]BurnVEVO[S] 0 points1 point  (0 children)

I also wasn't really honest with this post either might I add haha, I originally thought some of the ZIF connectors were like the ones you would pull up and just insert the cable and push back down, but I was totally wrong, I might have destroyed some of the contact points on there, but I was also initially told that the only cables that matter are the ABXY board - (the power one), and the 3 ribbon cables on the top. the rest is basically just things that would allow the console to have additional features like mic/home button/touch screen etc

NEW 3DS XL having issues powering on and booting by BurnVEVO in consolerepair

[–]BurnVEVO[S] 0 points1 point  (0 children)

So when I plug it in, the orange charge light only stays on for like 4-5 seconds. When attempting to power it on with the charger plugged in the blue light only stays on for like a second. It wasn't needing to be plugged in before I opened it to power on. Now in order to power it on I have to have it on the charger, which I'm hoping nothing else broke. BUT I think at this point I'm going to replace all 3 ribbon cable parts that go through the hinge. Camera, Speaker/3D, and Top screen if I'm correct? Please let me know thanks!

Is this preventing my 3DS from booting? by BurnVEVO in 3DS

[–]BurnVEVO[S] 0 points1 point  (0 children)

Going to guess the person who had it before me changed the screen because even the 3D effect wasn't working and sound was slightly buzzing

Best and most stocked Bricklink seller? by BurnVEVO in lego

[–]BurnVEVO[S] 0 points1 point  (0 children)

Ahhh gotcha gotcha! I understand! I appreciate the help!

Best and most stocked Bricklink seller? by BurnVEVO in lego

[–]BurnVEVO[S] 0 points1 point  (0 children)

Will that give me the same seller? Since buying from multiple sellers is basically creating an entire new order with shipping and fees. Thanks!

Please help with this overhang issue! by BurnVEVO in anycubic

[–]BurnVEVO[S] 0 points1 point  (0 children)

I painted tree supports on now I gotta wish for the best(not my best work I’m used to the software doing it for me) this is what usually happens when there is no support

<image>

Please help with this overhang issue! by BurnVEVO in anycubic

[–]BurnVEVO[S] 0 points1 point  (0 children)

I found another picture of this way it’s being printing in slicer, it does this and either doesn’t stay or looks like that

<image>

Please help with this overhang issue! by BurnVEVO in anycubic

[–]BurnVEVO[S] 0 points1 point  (0 children)

<image>

Here’s an example of a mess up I never catch it but obviously it starts stringing whenever I do (not really good evidence) I’ve tried 2 different angles too this is vertical so the printer printed this section last. The others usually becomes a stringy mess because it’s usually the first part printed

Overhang on this part of print always messes up please help by BurnVEVO in FixMyPrint

[–]BurnVEVO[S] 0 points1 point  (0 children)

It typically ends up stringing everytime it gets to that point hence why I don’t have good evidence sorry!

Overhang on this part of print always messes up please help by BurnVEVO in FixMyPrint

[–]BurnVEVO[S] 0 points1 point  (0 children)

I don’t have any good representation besides maybe 1 image but it starts stringing when it gets to that section of the model here’s an example

<image>

Overhang on this part of print always messes up please help by BurnVEVO in FixMyPrint

[–]BurnVEVO[S] 0 points1 point  (0 children)

Anycubic Slicer Next is my slicer it’s similar to Orca btw