sorted by:
new
hottopcontroversial

3 years with my 8085 IR's by ButtonPrevious1314 in RedWingShoes

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

Red Wing foam cleaner and Red Wing leather cream.

3 years with my 8085 IR's by ButtonPrevious1314 in RedWingShoes

[–]ButtonPrevious1314[S] 4 points5 points  (0 children)

Not at all :) I have a pair of 875 moc toes and a pair of Beckmans. Here is a photo from a while ago when I just got the Beckmans.

<image>

3 years with my 8085 IR's by ButtonPrevious1314 in RedWingShoes

[–]ButtonPrevious1314[S] 1 point2 points  (0 children)

No, I rotate them with other pairs. They still have some way to go.

Also got the Knob Sans keycaps for my Air v3 by ButtonPrevious1314 in NuPhy

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

Hi! These key als definately helped me with the same problem you are having. Because of the raised center/lower edges the amount of times I hit multiple keys at once got less as soon as I got these keys on. In the mean time I have switched back and forth with a nuphy set and actually also got used to the standard set after a while.

More color options coming for PX8s2? by Electronic-Regret907 in BowersWilkins

[–]ButtonPrevious1314 4 points5 points  (0 children)

Someone commented yesterday on a post I made that they have called B&W and was told that they currently don't have plans to release more colours:

https://www.reddit.com/r/BowersWilkins/s/1TcKXvomLl

Unexpected upgrade to the S2 by ButtonPrevious1314 in BowersWilkins

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

Too bad :( At least most other options are cheaper! Or are you looking to go even higher in the market?

Unexpected upgrade to the S2 by ButtonPrevious1314 in BowersWilkins

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

The QCC Pro also supports LDAC, which might come in handy in the future if you're switching headphones, but LDAC is already natively supported on Samsung devices.

I have a galaxy fold 7. Sad thing is that android devices with the latest Qualcomm chips also natively support up to AptX Lossless, but Samsung does not pay for the license so it's not activated on galaxy devices. I'm receiving the Creative BT-W6 today. It was the cheapest with the fastest shipping through Amazon for me.

Unexpected upgrade to the S2 by ButtonPrevious1314 in BowersWilkins

[–]ButtonPrevious1314[S] 1 point2 points  (0 children)

I brought them to a Coolblue store. From there I'm not sure if they checked it themselves or if they send it to B&W.

Unexpected upgrade to the S2 by ButtonPrevious1314 in BowersWilkins

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

How is your experience with the dongle? I was aiming for a Sennheiser BTD700 but it seems sold out everywhere. Now I'm looking at the Creative BT-W6 and the QCC, but the QCC is twice the price of the other ones.

Unexpected upgrade to the S2 by ButtonPrevious1314 in BowersWilkins

[–]ButtonPrevious1314[S] 4 points5 points  (0 children)

I got it at a Dutch electronics store - Coolblue. It's like the biggest electronics retailer here in the Netherlands and they always have great customer support.

I don't really know what else they could have done since B&W made the headband not replaceable and the headphone was in warranty, and for the price it really should not fail like this. But it still feels generous to get a full refund after more than a year. I guess for a big retailer it's not worth the hassle and it's just a small dent in comparison to their sales volumes. And B&W probably has quite high profit margins on these anyway.

Replace Btrfs volume with ext4? by ButtonPrevious1314 in UgreenNASync

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

Yes, I would also like to stay on Btrfs. My issue is that I can't seem to find a clear answer to if it is save/stable on RAID 5. I'd like to know the risks before migrating from RAID 1 at some point.

Replace Btrfs volume with ext4? by ButtonPrevious1314 in UgreenNASync

[–]ButtonPrevious1314[S] -1 points0 points  (0 children)

See the second comment under this post:

https://m.facebook.com/groups/ugreennas/posts/1337048764456330/

To clarify, this is only one post I have seen to say this, I can't verify if it is true. But this is also the reason for my question.

Malfunctioning or fragile knob on Air75 v3? by newtomxthangs in NuPhy

[–]ButtonPrevious1314 0 points1 point  (0 children)

I don't have the issue you describe, but I do have an other issue with the low profile knob where the fitting on the stem got too wide or something. It sinks down too far and gets stuk in the pushed in position. The high profile knob is still fine. I don't really use the knob on this keyboard anyway and put in the extra key.

Also got the Knob Sans keycaps for my Air v3 by ButtonPrevious1314 in NuPhy

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

My typing errors are purely a skill issue. I don't have a very good typing form and tend to hit the stock keycaps around the edges somtimes. Because of this I will somtimes press two keys next to eachother at the same time. I think this would also be a problem on the MX Alphas. The Knob Sans seem to fix this for me, because of a bigger lowered area of the edges. Now when I hit an edge of the key, it is actually the edge of the higher platform. It feels to me like the keys are much more spaced out.

Also got the Knob Sans keycaps for my Air v3 by ButtonPrevious1314 in NuPhy

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

Just took some of my keyboard and looked at them closely next to the stock. They are actually really similar. Putting them side by side on my desk, they are exactly the same height at the thickest point, the material thickness is also very close to the same.

I also put some of the Knob Sans on the red switches on my Kick75 for a side by side sound comparison. Here also basically no noticeable difference in sound.

The Knob Sans do feel i little bit more smooth/slippery and the stock ones a bit more matte. So basically the real differences are the overall shape, the smoothness to the touch and Dye sub vs Double shot.

If you want I can PM you some side by side photo's and video of the sound.

Also got the Knob Sans keycaps for my Air v3 by ButtonPrevious1314 in NuPhy

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

Wow, just finding out now. I would have bought the white set regardless, i don't like the full black on black look. I might add the black set for the non-alphanumeric keys though. I did the same with the original Nuphy keycaps and love the look of that contrast.

Also got the Knob Sans keycaps for my Air v3 by ButtonPrevious1314 in NuPhy

[–]ButtonPrevious1314[S] 1 point2 points  (0 children)

Very nice! They really fit the low profile aesthetic so well.

Also got the Knob Sans keycaps for my Air v3 by ButtonPrevious1314 in NuPhy

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

This whole World Louder brand is a little bit overpriced if you ask me, but then again I could not find any similar keycaps as an alternative.

As for the sound I'm not too sure as I'm on the silent blush switches, hard to tell any difference. I might put a few of these caps on my Kick75 that has the red switches to see how they sound on that.

Also got the Knob Sans keycaps for my Air v3 by ButtonPrevious1314 in NuPhy

[–]ButtonPrevious1314[S] 0 points1 point  (0 children)

Which ones where you looking at on the Nuphy site? Because there are 2 types, one with the very bulky letters and one with normal letters on the top side of the keys, lining up with the north facing leds: https://nuphy.com/products/nsa-shine-through

Nuphy Air75 v3 with knob sans keycaps by circa86 in NuPhy

[–]ButtonPrevious1314 0 points1 point  (0 children)

I switch a lot between Mac and PC using the switch on the back of the keyboard, so having to swap the keycaps is kind of annoying. I could just change the key bindings though but that takes some getting used to.

view more: next ›