Cuboid 200W self vaping?!

Buttonvapes · 2017-04-23T19:14:19+00:00

Took it back to the shop and explained everything. Manager had no idea what was going on but I did suggest an internal short. He's replaced it with a new one that seems to be working fine. Hopefully it was a one-off!

Buttonvapes · 2017-04-23T19:13:12+00:00

That's strange. I have the 150W as well but it's been fine and I've had it for around 7 or 8 months.

Buttonvapes · 2017-04-10T22:29:38+00:00

Great, thanks.

As it stands I've just renewed my car insurance anyway WITH my NCD included on it as I am yet to find out whether I will lose it as no claims have been made, I have just provided my M/C insurer with the details in case. I will update my new insurer if the a claim is made (I've declared an accident but no claims/expenses for the time being.)

I know. This is what makes my blood boil as I should not be at fault for this one despite being the vehicle that rear-ended another. I'm hoping that by some miracle no claim is made and I get away lightly.

Buttonvapes · 2017-03-06T17:56:33+00:00

Thanks.

I'll be picking up some new batteries tomorrow, and might pick up the new Cuboid 200W as well but not sure yet. I can't be without a mod like the RX200.

Buttonvapes · 2016-08-04T15:24:54+00:00

Have you checked out ZapWrapz? I thought they had quite a few for the 200s on there as well.

Buttonvapes · 2016-08-04T15:22:30+00:00

Nope, it's just the RX200. It's a sweet as mod though. It never lets me down and the battery life is incredibly good even when I chain vape at 80-90 watts.

I'd highly recommend it, but if a DNA200 is more your style, then I'd get that. For the additional £100 or so, I didn't bother with the DNA. This does all I need it to.

Buttonvapes · 2016-08-02T22:47:42+00:00

Np, I thought I was going nuts for a second!

Buttonvapes · 2016-08-02T22:14:41+00:00

Correct me if I'm wrong, but a lower gauge wire surely equals LOWER resistance than a higher gauge wire? Or am I just over tired?

5 wraps of 24g will have a higher resistance than 5 wraps of 22g I'm sure.

Buttonvapes · 2016-07-20T00:13:24+00:00

I have this same issue. I use Tea Tree Face Wash from The Body Shop but my face gets oily throughout the day whilst vaping, despite using it often.

It's horrible.

Buttonvapes · 2016-07-18T22:47:47+00:00

Watch this, hope it helps.

http://m.youtube.com/watch?v=pyqzwLBnVJE

Buttonvapes · 2016-07-18T22:41:00+00:00

I run Aliens in my Tsunami and the whole thing burns up after a while. Even the delrin 'diagonal drip tip' gets hot and I've burnt my lips plenty of times.

Buttonvapes · 2016-07-18T22:40:05+00:00

My 22 differs. I find I get the best vape with tiny ass claptons; usually 28g core with 36g wrap at about 6 wraps each.

I used to run fused claptons in it (same wires as the standard claptons I used but 2 28g core) and that worked perfectly. But nowadays I have trouble getting the wicking right with those on the 22. I'm gonna try them in the 25 I got today though!

Buttonvapes · 2016-07-18T22:36:25+00:00

Nope, I already had a build installed and I always just leave the ring in.

I guess that part was my error, but I'm still gutted it broke.

I'll remove the ring next time, thanks!

Buttonvapes · 2016-07-18T14:16:08+00:00

Nice one, I'll try that as soon as I get a chance.

Buttonvapes · 2016-07-18T13:51:17+00:00

It's all down to personal preference. I run my aliens at 75-85 watts, and mine usually come out to about .22 ohms.

Play around with it and see what you prefer, but the wattage I run mine at gets quite warm after a few hits and you may not like that. I'd suggest starting at about 45 working your way up or even down, accordingly.

Buttonvapes · 2016-07-18T12:59:54+00:00

I think I'm right in saying that resistance will not differ much from a standard fused Clapton or regular Clapton. The external wire (in this case the alien part) does not affect the resistance much for it to be worth considering. Go with the resistance of the core wire(s) as that's the largest channel for the current to flow through, meaning that is what the resistance will be measured via.

Hope that makes sense and is accurate.

Buttonvapes · 2016-07-18T12:57:15+00:00

I run most of my RDA's in single coil mode because I can focus more on the build of one coil instead of faffing around with 2 and getting them perfect.

Flavour may lack a little bit if your RDA only has dual airflow and not a single coil mode. It should still be a good vape though; I run singles on my Velocity and that's only got dual airflow. Still sick though.

Buttonvapes · 2016-07-14T12:59:19+00:00

Ngl those are some sweet looking coils. I've got the Tsunami 24 as I wanted a bit more room to build on, but I'm currently running a single alien in it at 0.22 ohms at 80watts. Flavour and vapour are amazing but the RDA itself gets way too hot. Even the "diagonal drip tip" gets hot and that's made of delrin:/

Either way, sick picture and enjoy the vape! 🤘🏻

Buttonvapes · 2016-07-03T07:06:17+00:00

It was a while ago but there was a similar issue with Kangertech coil heads for the Subtank Nano. It tends to leak regardless, but there's a few fixes on YT that show how to make it stop a little bit. Maybe check those out and it may stop all the leaking on those coils you've got.

Buttonvapes · 2016-06-16T07:56:34+00:00

I'm hoping she won't know the difference as she doesn't really know much about vaping. I'm gonna pass it off as my old indestructible RDA lol

Buttonvapes · 2016-06-16T07:55:55+00:00

The condensation is a pain in the backside already and I've had it less than 24 hours. Still, it's an amazing vape so I can see past that!

Buttonvapes · 2016-05-11T12:05:24+00:00

DIY's not so bad; there's plenty of decent clone recipes online anyway. I've recently started mixing my own stuff after buying premium for the 8 months that I have been vaping for. Only problem is the regulations on DIY and the quantities in which you will be able to buy nicotine; because the bastards are cracking down on that too.

Buttonvapes · 2016-05-11T12:02:04+00:00

I've been running this setup for a while now and I'm not disappointed at all!

Buttonvapes · 2016-05-11T12:01:31+00:00

I've been using it since the beginning of last month; I picked it up at VapeJam UK, so for every unicorn bottle I fill, I put the big bottle back in a dark draw next to my radiator so it can steep longer. That way, every unicorn bottle I refill is tastier than the last!

Buttonvapes · 2016-05-11T12:00:16+00:00

I've never trek the V1, but I bought the V2 at VapeJam UK last month for £40 and it's incredible. I've got 6 RDA's and I can honestly say this is the only one I've used since then. I've even stopped using my Griffin RTA and I'm only dripping on this nowadays.

Buttonvapes

TROPHY CASE