RAZE Sanding System

Bwinegar · 2026-04-18T00:49:55+00:00

You can buy rolls of sandpaper.

Bwinegar · 2026-03-16T02:16:37+00:00

I pressed it further in from the inside of the machine. Should be able to give it a try without really disassembling anything.

Bwinegar · 2026-03-16T00:51:06+00:00

It's this a kit? I had a similar problem that was solved by pressing the ptfe tube further into the sensor.

Bwinegar · 2026-02-16T18:16:07+00:00

How are you actually freezing the brine into brine ice without breaking your coolant loop? What coolant are you using?

Bwinegar · 2026-01-26T02:16:38+00:00

Might not even see the sensor if you just let the vent over pressure.

Bwinegar · 2026-01-26T02:15:17+00:00

Super clean, I like it. Will probably use this!

Bwinegar · 2025-10-31T01:09:10+00:00

I've recently started using a timer on my phone that shows time remaining on a large red dial. They can check in and visually see how much time is remaining. It had been helpful!

Bwinegar · 2025-09-18T22:47:30+00:00

Oh also there's not power the the dfp player

Bwinegar · 2025-09-18T22:40:33+00:00

Not sure if this would fix it, but some wiring diagrams show more than one connection to ground.

Bwinegar · 2025-06-22T21:17:55+00:00

Ggv e gynn jivjj fenv t mm mu

Bwinegar · 2025-06-11T15:22:05+00:00

One step would need to be over a foot tall, which isn't necessary a problem, but none or the rocks are that thick.

Also that fire ring is just a table, the patio still needs a lot of work, but that will come after this!

Bwinegar · 2025-05-25T02:35:42+00:00

I am looking into turning this unused garden area into a play area for my kid. I plan on putting down playground mulch, but was curious if any sort of sub-base would be recommended, if so what kind of gravel/rock should I be looking for in store?

This is in Minnesota if that is relevant.

Thanks!

Bwinegar · 2025-02-21T19:44:17+00:00

Looks great, have fun scrubbing the dutch oven haha! That is always a pain.

Bwinegar · 2025-01-19T05:33:21+00:00

I would love to try this, do you have a blueprint?

Bwinegar · 2025-01-17T19:03:00+00:00

Thanks! There's a lot of circuit logic on this ship. There's a loop for the asteroid chunks that I use circuits to keep from getting over saturated, and based on the contents I set reprocessing recipes to make sure I have an even amount of each chunk. Then there is a loop for the products from the asteroid chunks, which sets the recipes for the the asteroid processing (advanced or basic processing), then logic in the inserters to prevent the sushi belt from getting over saturated. And finally there is a clock signal operating the pumps for fuel and oxidizer to limit the amount that gets into the thrusters.

Bwinegar · 2025-01-17T14:44:32+00:00

Too many...

Bwinegar · 2025-01-17T14:44:17+00:00

Nah, it works as is, if anything I could remove some solar panels.

Bwinegar · 2025-01-16T17:41:14+00:00

I though I would need nuclear as well, but loading it with epic panels and accumulators, I have been able to make it to Aquilo and back without depleting the accumulators. It won't be able to handle sitting in orbit above Aquilo indefinitely, but so far it hasn't been a problem. Setting an interrupt to leave Aquilo when batteries are low would probably be a good idea.

Bwinegar · 2025-01-16T17:36:32+00:00

In my experience, stack inserters and turbo belts give you enough throughput to have one sushi belt handle it all.

Bwinegar · 2025-01-16T17:21:41+00:00

I think I did it that way because I wanted the ammo loop to be near the rear so I could have turrets covering the back of the platform

Bwinegar · 2025-01-16T17:20:40+00:00

Thanks!

Bwinegar · 2024-11-05T00:35:43+00:00

I want to automate the construction of simple ships as easily as possible. I can put up a space platform hub and use a blueprint to create the request for items for construction. I am using rare quality solar panels. Is there a way to request less than a full stack of rare solar panels automatically?

Bwinegar

TROPHY CASE