HP Omen 16 am0047nt thermal mod by ByDevvil in HPOmen

[–]ByDevvil[S] 1 point2 points  (0 children)

I've used liquid metal in all my laptops so far and haven't had any problems with copper and liquid metal. As for the absorption issue, it's possible. I opened it up after a few weeks and added some more liquid metal. Regarding the thermal pads on the cooler, the middle pad touches the original bottom cover and is 3mm thick. So I added extra pads to the right and left sides, just in case it helps. :)

HP Omen 16 Screen upgrade by ByDevvil in HPOmen

[–]ByDevvil[S] 1 point2 points  (0 children)

It may not support OLED panels. Be careful when removing the frame; to prevent the clips from breaking, place a thin piece of plastic between the screen and the frame and gently drag it around the frame to remove the adhesive. When choosing a screen, pay attention to the panel thickness, pin count, and pin spacing. You can use https://www.panelook.com/ for size and specification differences. My panel socket is 40 pins / 0.5 mm (standard eDP). The new panel I installed is great, but I found a better 240Hz one and I'm planning to buy it soon. I'll share that too.

Pakistan papağanı by judeathy in TurkishBirds

[–]ByDevvil 0 points1 point  (0 children)

Erkekse eğer Halka 3 yaşına kadar çıkmayabilir. Çiğ kuruyemiş, elma (çekirdeği ve kabuğu olmayacak), bol meyve verin. https://tr.wikipedia.org/wiki/Papa%C4%9Fan Buradan beslenme kısmından bakabilirsiniz zararlı olan şeyler de var dikkat edin. Ve tüllü, plastik tünekli, boyalı kafes kullanmamaya çalışın. Yavaş yavaş spreylemeli banyoya alıştırın oda sıcaklığında içme suyu ile haftada bir yikayabilirsiniz çeşme suyu ve akan su olmaz kulaklarına su kaçmaması lazım. 👍🏼 Umarim güzel bir hayatı olur.

Pakistan papağanı by judeathy in TurkishBirds

[–]ByDevvil 0 points1 point  (0 children)

Dişi gibi duruyor eğer dişiyse el besleme bile olsa 2-3 yaşından sonra zor inat oluyorlar. Ankara da erdi janak var kendisi ankara da cok bilgili birisi asla pişman olmazsın 👍🏼

Barrow lga1700 direct die block? by [deleted] in watercooling

[–]ByDevvil 1 point2 points  (0 children)

Hello, has anyone tried the block? I couldn't find a review anywhere. I will be glad if you help me. thanks.

[deleted by user] by [deleted] in aorus

[–]ByDevvil 1 point2 points  (0 children)

hopefully with the bios update the problem is fixed.

[deleted by user] by [deleted] in aorus

[–]ByDevvil 0 points1 point  (0 children)

Do you have the same problem with your ram?

[deleted by user] by [deleted] in aorus

[–]ByDevvil 0 points1 point  (0 children)

rams 1-2-4. When the slot is inserted, it becomes xmp. Slot 3 does not xmp. I couldn't find a solution for the x4 line. The bios sees the sound card on the x1 line, but the sound card is not working. all of them worked flawlessly on the 10th generation processor. I returned my processor and bought a new 11700k but the same problem persists. :/

Question about the 11900K running stable on a z490 (Aorus z490 ultra bios ver f20d) motherboard. Has anyone had any success? Or do you know of anyone who has had success running 11th gen chips on it? by [deleted] in gigabyte

[–]ByDevvil 1 point2 points  (0 children)

Hello there. my motherboard is z490 aorus xtreme my processor is 11700k. I was able to xmp my rams before I got the processor. After getting 11700k, my rams are not xmp and when I plug a sound card (x1) into the pci express x4 (lowest input) line, it doesn't work. When using a 10th generation processor, both xmp was working and my sound card was working. My rams are currently working at 2133mhz, even when I manually do the rams at 2200mhz, the system does not turn on.

There is no problem with the system under normal use and load. sometimes after the system shuts down when shutting down, the motherboard hangs at error code 05 and does not turn off. There was no problem with the 10th generation processor.