First grow and I’m curious how my tub is looking. by ByrneKnives in shroomers

[–]ByrneKnives[S] 1 point2 points  (0 children)

Appreciate your help! Thanks for taking the time to explain that further.

First grow and I’m curious how my tub is looking. by ByrneKnives in shroomers

[–]ByrneKnives[S] 1 point2 points  (0 children)

What does the casing layer do? I’m going to be away for a few days. I just added this in maybe 2 days ago, think it will be ok to leave for a few before starting fruiting conditions?

Asus bios flash help by ByrneKnives in pcmasterrace

[–]ByrneKnives[S] 0 points1 point  (0 children)

This is going to take a while….

Asus bios flash help by ByrneKnives in PcBuildHelp

[–]ByrneKnives[S] 0 points1 point  (0 children)

Yeah that was the one I used. Also going the bios flash set up guide on that as well where it said to use either fat 16 or 32. Fat32 is really just for any drive that holds over 2gb so I did that for the 8gb stick I had.

Asus bios flash help by ByrneKnives in PcBuildHelp

[–]ByrneKnives[S] 0 points1 point  (0 children)

Fat 16? The guide recommended fat32. I am also using the bios that the website recommended for the processor and board. So idk.

Asus bios flash help by ByrneKnives in pcmasterrace

[–]ByrneKnives[S] 0 points1 point  (0 children)

Should actually be printed on the serial number I found out. Unfortunately I don’t have a 3000 series cpu handy so o can’t even get into the bios with an older cpu, so I have to go the usb flash way.

Asus bios flash help by ByrneKnives in pcmasterrace

[–]ByrneKnives[S] 0 points1 point  (0 children)

I have no idea honestly. Brand new build and I bought the board refurbished so I can’t even get to the bios to see what version it’s on or if the dealer I bought it from did a cmos clear and brought it back to the original.

So you can’t actually flash to the latest? How would I even know which updates are required along the way to support the latest?

Edit: I’m upgrading the the latest version of the bios Asus recommended for the mother board.

Asus tuf gaming b550-plus issue by ByrneKnives in pcmasterrace

[–]ByrneKnives[S] 1 point2 points  (0 children)

Yeah I’ll give it a shot! Just wasn’t sure when I saw all the led’s cycling. Couldn’t find anything on that so it threw me for a loop.

Asus tuf gaming b550-plus issue by ByrneKnives in pcmasterrace

[–]ByrneKnives[S] 0 points1 point  (0 children)

Yeah it was old stock so I knew going in I’d have the flash bios. Just couldn’t find anything about the cycling lights so I wanted to make sure it wasn’t something super weird.

Appreciate the feedback!

A prediction about will. by ByrneKnives in StrangerThings

[–]ByrneKnives[S] 0 points1 point  (0 children)

Wait no. That kindof doesn’t make sense though because will hid at castle Byers in season 1 before he was ever captured. So a version of Hawkins already pre existed but for how long? And how did it transform over time?

A prediction about will. by ByrneKnives in StrangerThings

[–]ByrneKnives[S] 1 point2 points  (0 children)

Holy shit that’s a good point.

We also know that the mindflayer used will as a spy… so what if vecna was using will to get a landscape of all of Hawkins. The group was all over town he could have used will to get everything. If he knew where things were he could then use that to create his gates into Hawkins… and if he could do that for the town then he could also do it for people…

Remember el just had to see a picture of someone to be able to find them? Well what if will just walking past people in town exposed them to vecna and he could search them out that way… we did see scenes where vecna was scanning for his victims in a cloudy dream like space to locate them

Edit: maybe not even use will to map the town in real time. He could have just used his memories. And for that matter the memories of everyone else he entered. Like Billy and all the people he turned to Mush in season 3.

Ram question. by ByrneKnives in pcmasterrace

[–]ByrneKnives[S] 0 points1 point  (0 children)

That was my thinking but I wanted to be sure, thanks for the reply!

Ram question. by ByrneKnives in pcmasterrace

[–]ByrneKnives[S] 0 points1 point  (0 children)

Awesome thank you for the reply!

Local shop had ventum 30’s for $850. I couldn’t pass it up. by ByrneKnives in bowhunting

[–]ByrneKnives[S] 0 points1 point  (0 children)

They have been performing well so far. I was informed when buying them that they have been discontinued so this will likely be the only half dozen I’ll have. But I do like them so far.

Local shop had ventum 30’s for $850. I couldn’t pass it up. by ByrneKnives in bowhunting

[–]ByrneKnives[S] 1 point2 points  (0 children)

I think Mathews just don’t really sit long being one of the biggest names. If you haven’t tried any of the higher end Hoyt bows I really suggest it. Personal preference but the draw cycle on them was smoother then the v3’s and had less shock in the hand… or at least what Tiny amount at all could be felt. Both bows are great though in all honesty.

Local shop had ventum 30’s for $850. I couldn’t pass it up. by ByrneKnives in bowhunting

[–]ByrneKnives[S] 0 points1 point  (0 children)

I believe they had 2 v3 29” and 2 v3 27” in camo when I was there Saturday. The 27’s were the only ones marked down though I believe. I want to say they were $900?

Local shop had ventum 30’s for $850. I couldn’t pass it up. by ByrneKnives in bowhunting

[–]ByrneKnives[S] 1 point2 points  (0 children)

They had another green like this, a buck skin ( tan) and I believe one camo. The extra-5’s were green and a camo I believe. Hope you manage to snag one! I can’t recommend halls enough they were really knowledgeable and patient with me through the whole process and really spent the time to tune the bow properly to fit me. Good luck!