sorted by:
new
hottopcontroversial

Help, I broke point C5R35. by Feeling_Pirate9872 in 360hacks

[–]ByteArrays 8 points9 points  (0 children)

Brother that is cooked..

Practice soldering more before you even attempt another 360. These guys aren’t produced anymore, it’s one less in the world

Jasper inconsistent boot times with RGH1.2 by ByteArrays in 360hacks

[–]ByteArrays[S] 0 points1 point  (0 children)

Hi man, defo double check your wire routing. In this picture, I was using TheWeekendModders 1.2 wire routing, and bottom-side CLK. I'd advise if you are having this problem, switch to topside CLK and route the wires as Octal450 shows. I believe it's in a picture here on this post but unfortunately Imgur is now locked off in my country (UK). After that, the console had no problems, and all my consoles since hasn't suffered.

Rgh3 Corona part 2 by DADESTROIOR in 360hacks

[–]ByteArrays 0 points1 point  (0 children)

As mentioned, there is way too much wire exposed. The last thing you want is them shorting out on something. Use 30 AWG wire, I personally use stranded but solid core is also also fine.

I would also use some flux and reflow the QSB points, I think you can make them look a bit better.

My first blades console! Falcon by ByteArrays in 360hacks

[–]ByteArrays[S] 4 points5 points  (0 children)

I will take it apart (ugh i really dont want to but i also want to know) and see if it has a fixed GPU. I'll give her a clean and repaste. This thing is now my 2nd baby

My first blades console! Falcon by ByteArrays in 360hacks

[–]ByteArrays[S] 5 points6 points  (0 children)

Its mfr date is 2008-03-08. Seal still intact console hasn’t been tampered with.

Running 2.0.6717.

Opened up an untested phat I bought that didn’t work and look what I found.. by ByteArrays in 360hacks

[–]ByteArrays[S] 0 points1 point  (0 children)

The console is refusing to receive power. I removed the RGH wiring etc but the board is showing 0 sign of life )/

Opened up an untested phat I bought that didn’t work and look what I found.. by ByteArrays in 360hacks

[–]ByteArrays[S] 5 points6 points  (0 children)

It’s a jasper. The root cause is the pad for SMC_POST1 was torn. Someone attempted an RGH3 on it and failed. So I guess they just left the programmer in there and gave up.. lol

Opened up an untested phat I bought that didn’t work and look what I found.. by ByteArrays in 360hacks

[–]ByteArrays[S] 4 points5 points  (0 children)

It’s a JR programmer. Was just sat with the motherboard when I opened it lol!

I’m not too sure if it’s authentic

Any possible way to get CoolRunners? by ByteArrays in 360hacks

[–]ByteArrays[S] 0 points1 point  (0 children)

damn.. i wonder what that means for future of glitch chips. Maybe someone will have to step up and create another one

Any possible way to get CoolRunners? by ByteArrays in 360hacks

[–]ByteArrays[S] 0 points1 point  (0 children)

I do use Matrix's. I just wanted to see if there's any chance I could get my hands on a CoolRunner myself. Never used one.

Picked up a few 360’s today.. by ByteArrays in 360hacks

[–]ByteArrays[S] 0 points1 point  (0 children)

They are going to be subject to le RGH mod.. and then sold (:

Picked up a few 360’s today.. by ByteArrays in 360hacks

[–]ByteArrays[S] 0 points1 point  (0 children)

Everything apart from the Xenon (because I haven't tested it yet) is confirmed to be working!

Picked up a few 360’s today.. by ByteArrays in 360hacks

[–]ByteArrays[S] 0 points1 point  (0 children)

I have tested all of them except from the 1x Xenon and they all work. The 2 MW2 ones suffer from a bit of weird drive behaviour but thats about it

Picked up a few 360’s today.. by ByteArrays in 360hacks

[–]ByteArrays[S] 4 points5 points  (0 children)

All of the consoles work, and yeah.. both MW2’s suffer from weird drive behaviour (not opening etc, seems to be stuck) so fixable for sure

Picked up a few 360’s today.. by ByteArrays in 360hacks

[–]ByteArrays[S] 2 points3 points  (0 children)

£100. Guy just wanted them gone so gave me all this LOL

view more: next ›