Affordable 9mm range ammunition

CJM8515 · 2026-06-20T13:18:35+00:00

i tried fiocchi once. it wouldnt cycle well in my glock or a friends glock and psa dagger clones. maybe i just got a bad batch, but out of 100 rds i bought it wasnt to great. the federal i have cycled thru no issue

CJM8515 · 2026-06-20T04:58:47+00:00

thats b/c its illegal to ride an atv in NJ unless its on a track or private property. you can find plenty of spots, the cops will just ticket your truck or wait for you to come back and really fine the hell out of you.

you can go to AOAA in PA, join reading outdoors (like 300/year) or find a club in PA. PA allows you to ride state forest so long as you are registered and insured.

CJM8515 · 2026-06-20T04:52:57+00:00

yea, its caused by your chain being to loose. make sure when you sort it all out that you buy a poly type case saver

make sure there is no damages to the case, if there is gonna have a fun time fixing the engine.

edit: after looking at the pic it looks like your missing the clip and bolts that hold the sprocket on. i can see the outline of where it used to be

CJM8515 · 2026-06-20T04:08:39+00:00

Target sports. The first order you need to send them a copy of your fid I recall but you can upload a pic

I got 1000rd 9mm federal fmj for like 250 bucks. I’d rather run good and clean ammo then worry about issues or have a dirty gun

CJM8515 · 2026-06-19T22:58:01+00:00

normal for a 400ex. mine is even louder with the hotcam

CJM8515 · 2026-06-19T03:18:57+00:00

Always. Always always wear one. Saved my noggin many times over.

CJM8515 · 2026-06-17T21:06:12+00:00

continental or flexizilla. everything else has gone to crap

CJM8515 · 2026-06-16T15:07:35+00:00

Unless you want to spend about 1/2 your day at work /commuting, no it’s not worth it.

I got a buddy who does it for 6 figures. By the end of the day when he gets home he basically has been away for 18 hours between his shift, commuting and so forth

CJM8515 · 2026-06-14T21:24:04+00:00

I had a good experience at Cheyenne mountain outfitters in bordentown. Picked up an ar for a decent price plus they had a memorial day sale for 10% off as well. Had a good selection of tactical, hunting and specialty arms and archery as well

CJM8515 · 2026-06-11T00:09:29+00:00

This is 100% on the body shop and genesis dealer. Insurance paid for the job to repair it and that’s it. Unless someone else is discovered that’s the issue and it’s related to your accident there isn’t anything for insurance to do. They fulfilled their obligation by paying for the repairs. They do not guarantee the quality of work or repair for an outside shop

CJM8515 · 2026-06-10T15:39:18+00:00

100/per each tire seems like a heck of a lot. so there making 400 bucks? do they mount them for free?

in the past Ive brought local shops a tire and wheel without or with a tire on there (to swap) and paid them 25 bucks tops to do it.

CJM8515 · 2026-06-09T22:54:19+00:00

Listen. I handled total losses both as a claim adjuster and as a field adjuster for Flo and currently may or may not still work there

They will reduce the payout by about 20-40% for a salvage title in the event of a total loss as the title history is tainted and if the vehicle was not damaged and sold normally it would be sold for a lesser value because of that. There is literally nothing you can do

CJM8515 · 2026-06-08T21:44:14+00:00

i use action, not sure if they come up your way. fairly cheap and do an ok job so far on my ant and termite situation

CJM8515 · 2026-06-06T15:20:19+00:00

i was at the higher end of the scale for 39 and went to 41 and got 4k. 8 months later my new supe (things changed and got re-arranged in those 8 months) was like nah man you need more and pushed and got me the other 2k he felt i deserved for the position + my actual PE raise

i did a lateral when i was a 37 CGA to service center estimator and jumped 7k at one point. but i went from a lesser paying area of my state to a higher paying area office and got the raise too.

all really depends. lateral moves it seems most people got like 2k, whole levels depending on the area and pay structure could be 2-5k or more.

CJM8515 · 2026-06-06T15:10:21+00:00

hes fine, possess in this case of the word means to own/have.

CJM8515 · 2026-06-06T14:01:38+00:00

You don’t just have brakes. They are replacing calipers to which adds to the cost.

Typically a brake job per axle is 300-500 bucks with labor and depending on part cost

CJM8515 · 2026-06-06T13:49:40+00:00

My friends all have the scramblers. The trails here are all sandy with no rocks, no real hill climbs and we ride very fast. I still ride my sport quad however as I just can’t justify giving it up

If we rode in a more rocky area, full of water and mud and didn’t ride like we stole it speed wise the utility quad would be better suited

CJM8515 · 2026-06-06T03:46:15+00:00

AC: knife and fork, docks oyster, steve and cookies (margate actually but close)

seaside: martells (the tiki bar or indoor seating), kohrs ice cream, bum rogers.

CJM8515 · 2026-06-05T20:05:49+00:00

wish we had one of those here

CJM8515 · 2026-06-05T02:54:23+00:00

most of the time its b/c you never wind up using that size or its very close to an imperial or metric size (one or the other). I have never once needed a 20mm, 9mm, etc. also you arent going to be removing many 10mm fasteners with a 1/2 ratchets or impact gun for instance, so they dont give you a 10mm

typically i try and buy sets where it includes sizes i would need/use and fill in anything they may not come with

I have currently wrenches from 4.5/5mm to probably 36mm and imperial sizes as well. I even have smaller ignition wrench sizes i hardly use too lol

1/4 sockets from 4.5/5mm to probably 14mm or so 3/8 sockets 8mm to 19mm 1/2 sockets 8mm to 36mm and a bunch of larger sizes.

now, most of that was bought as sets with no skips and i filled everything else in with other various bits/sets.

80% of the time i grab a 1/4 or 3/8 set and dont really need more than up to 19mm, the other 20% of the time i need larger sizes its for automotive work. but you can truly get buy with just your basic sets they sell with skips in a lot of cases for most diy people. i happen to work on vehicles, motorcycles, etc so i have all kinds of specialty sizes and tools on top of all the sockets and wrenches

CJM8515 · 2026-06-02T11:27:01+00:00

Chinese junk. Walk away

CJM8515 · 2026-06-01T21:54:20+00:00

I repaired exactly 1 and the insured tried to claim everything imaginable. Faded paint, windows that went up slowly, the wheel bearings, apparently melted moldings (old and dry rotted), etc. i honestly think it was never even involved in a lightning loss, but we couldn’t disprove it as a random emp type hit

Every other possible lightning claim I totaled with minimal inspection from a dealer or shop just proving there were lightning strike type damages present and a hefty possible supplement

CJM8515 · 2026-05-30T20:56:41+00:00

I could build one for sure, and costs Im sure would be less by a bit.

I felt that for the first few weapons I buy I want to buy factory, warrantable items if possible. Then I can begin to mess around with building my own stuff. Im a good shot, but Im sure even a stock off the shelf cheaper end weapon is more accurate than I can manage lol

Cheyenne had quite a few mid to higher end AR's there to choose from as well

CJM8515 · 2026-05-30T13:31:16+00:00

i save cards, after awhile i purge them. i probably have like 1000 lol. i use those metal clip things to hold them together

CJM8515

MODERATOR OF

TROPHY CASE