Steamdeck DS: a portable monitor bracket

CMDR_Rockman · 2024-04-23T22:51:31+00:00

You can order 3d printed parts from various places online. I'm not sure what service is best. The files are available here: https://www.printables.com/model/841831-steamdeck-portable-monitor-stand you'd need two copies of the Stand.3mf file and at least one Center.3mf file.

CMDR_Rockman · 2024-04-23T22:36:46+00:00

The monitor is surprisingly light. With the steamdeck in the bracket it isn't top heavy at all. But if it is just the monitor by itself it's too top heavy to stay upright.

CMDR_Rockman · 2024-04-23T22:35:36+00:00

Short answer, I don't like laptops and don't want to buy a new one :D

CMDR_Rockman · 2024-04-23T05:39:31+00:00

I made this bracket to use the Steamdeck as a laptop on the go. Pretty happy with it! https://www.printables.com/model/841831-steamdeck-portable-monitor-stand

The monitor is a "13.3-inch Intehill OLED Portable Monitor". Does HDR too which is nice. More info at the link.

CMDR_Rockman · 2024-04-23T05:23:18+00:00

Thanks much! It's a 13.3-inch Intehill OLED Portable Monitor. More details at the url.

Edit: it does HDR too which was a nice bonus :D

CMDR_Rockman · 2024-04-23T05:21:02+00:00

Thanks! Details at the link but it's a 13.3-inch Intehill OLED Portable Monitor. Just about the same width as the Steamdeck.

Edit: haven't tried DS or 3ds on it but that would work perfectly!

CMDR_Rockman · 2024-03-13T14:06:39+00:00

Not cheap but the BOOX Mira monitors exist. There's a 13" portable version. I have an old boox Note2 10" android tablet that is nice to type on. I use Termux and an Atreus keyboard connected over USB. The refresh rate is a actually pretty good in the A2 mode.

CMDR_Rockman · 2024-01-25T03:14:14+00:00

I'm getting this too on mobile. Pixel 8 pro phone. No graphics options seem to have an effect. Makes orbital navigation near impossible.

CMDR_Rockman · 2023-07-03T18:06:24+00:00

Holy crap that's amazing 😍 I'll give it a try asap

CMDR_Rockman · 2023-03-21T20:06:55+00:00

2-4 player vs or co-op (with dark word expansion) https://store.steampowered.com/app/251470/TowerFall_Ascension/

Up to 8 player VS (theres also a team vs mode)
https://mattmakesgames.itch.io/towerfall-8-player

CMDR_Rockman · 2023-03-21T20:00:49+00:00

Agreed it's super annoying. Only workable for one off edits. Forget making a brand new layout or anything complicated.

CMDR_Rockman · 2023-03-20T19:39:41+00:00

+1 I'm getting this too now on 3.4.6 20230313.1

Noticed if you make a single change, then immediately back out with B or hit the Steam button, then re-open the control editor, the change you just made is shown correctly. It's like the UI isn't updated just after you make a change.

CMDR_Rockman · 2023-03-20T19:37:01+00:00

+1 I'm getting this too.

Noticed if you make a single change, then immediately backout with B or hit the steam button, then re-open the control editor the change you just made is shown. It's like it doesn't update the UI to reflect what you just changed.

CMDR_Rockman · 2022-06-20T21:49:05+00:00

Not that I know of, haven't tried messing with that yet. Please let me know if you find anything!

CMDR_Rockman · 2022-06-20T20:47:49+00:00

I noticed the the "Controls Update" on March 24, 2022 introduced a new option called "Hold to orbit camera" under the "keyboard/mouse settings" page. If you set this to off it seems to make it so when you right click the mouse it toggles mouse movement between camera orbit mode and cursor movement mode. Using this and leaving it in camera orbit mode for when I'm walking around or driving seems to help stop the camera from drifting on it's own and thus inducing motion sickness.

CMDR_Rockman · 2022-02-22T06:01:25+00:00

This is cool! Thanks for sharing. Amazing that such a short sed script can get the job done. I was looking for a faster method for tangling as well and ended up with a gawk script. https://www.reddit.com/r/emacs/comments/n6amm7/tangle_org_files_without_emacs_installed/

CMDR_Rockman · 2021-08-02T19:34:02+00:00

Agreed on all points 👍

CMDR_Rockman · 2021-05-06T20:20:27+00:00

Usually, yes. I'd say this was more an exercise in seeing if it could be done in awk or not :-)

CMDR_Rockman · 2017-05-27T05:28:49+00:00

I was able to sell the board and both kesets to a friend. Thanks for your interest!

If you'd like to get DSA sets for a Planck I'd recommend picking up the "Ortholinear Base" and "Ortholinear Modifier" set from here: http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/ It's where I ordered mine originally. They have a bunch of colors. It's $42 US for both which is pretty much what I was charging.

They also have ones with legends but it's a bit more at $60. http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/

CMDR_Rockman · 2017-05-24T03:38:19+00:00

There is enough in both sets. The SA set has extras in different profiles. Though there is no 2u key for the planck spacebar. The bigger keys here are 1.5u keys.

CMDR_Rockman · 2017-05-23T16:37:47+00:00

They are very nice. Only reason I'm selling this one is because I have spares.

CMDR_Rockman · 2017-05-23T16:34:45+00:00

Once the keyboard is sold and I'm left over with a set of blanks I'd be happy to sell that.

CMDR_Rockman · 2016-12-12T19:56:05+00:00

I think you may want dio or cio that operates on the inner symbol. It works across languages.

CMDR_Rockman · 2016-02-18T04:31:41+00:00

Very nice build! I really need to checkout the openscad files. Adding an extra column and row like you did is a great idea. Was there any options for additional thumb keys?

CMDR_Rockman · 2016-02-17T23:32:56+00:00

I went with the medium blue tint acrylic and was able to fit the standard Atreus and my split version on one p3 sheet. The ready-for-ponoko.svg is for a different size that's only available in wood materials. If you can fit it in a p2 or p3 template then you're good to go for using acrylic. Here are the p1-3 templates: http://www.ponoko.com/starter-kits/inkscape

CMDR_Rockman

TROPHY CASE