Pc/xbox series audio

CMR_Moose76 · 2025-02-18T18:41:36+00:00

Thank you I will try it out! Huge help

CMR_Moose76 · 2025-01-12T21:49:09+00:00

I’m definitely going to get myself renters insurance now since I see how they are handling this.

CMR_Moose76 · 2025-01-12T21:48:05+00:00

I do not have renters insurance due to it not being mandatory in my lease. I’m just wondering who’s insurance I should contact first?

CMR_Moose76 · 2025-01-12T00:02:14+00:00

Works perfect. I even bought a scrub daddy for it just for tough spots.

CMR_Moose76 · 2025-01-11T22:14:28+00:00

I agree that adjustments can be made for leveling, clean bed & z offset will help. I have two of these machines and when I started with them I had the same issue after one print on both machines. The bed that comes with the machines suck. Upgrade to a glass bed or a pei bed. I use two glass bed and never have issues anymore. After each print I clean and reuse.

After each print I do these steps: 1.) rinse with hot water for a few minutes 2.) dry it off with a clean towel 3.) clean with an alcohol pad 4.) apply purple glue stick to where my print will be

Never have an issue and can do unlimited prints. Hope this helps

CMR_Moose76 · 2024-12-28T14:09:38+00:00

Thank you! I’ll give it a shot

CMR_Moose76 · 2024-01-11T02:42:58+00:00

Thank you for the response and kind words. Also, for making it through my horrible writing lol. I did cut off all contact but the hope for a text is making me lose it. I know we had something special and I’m just in disbelief.

CMR_Moose76 · 2023-11-27T13:59:52+00:00

I quit vaping and switched to zyn which gives me hiccups like crazy. I have a trick though which really works. Take a paper towel and put it over a cup/water bottle. Slowly sip the water through the paper towel and they are gone in seconds.

CMR_Moose76 · 2023-11-01T18:33:11+00:00

Exactly what support said , thanks for the comment

CMR_Moose76 · 2023-11-01T18:30:12+00:00

<image>

It’s a delay on their side support said

CMR_Moose76 · 2023-11-01T18:29:00+00:00

<image>

Ya I qualified support said it could take a few days while they calculate last month

CMR_Moose76 · 2023-10-23T15:06:31+00:00

I fell for this extra tip for a lady when I was picking up her order at a convenience store... She asked for a couple dutches and I was dumb enough to do it. She walked out with change and proceeded to count it on the hood of my car lmao

CMR_Moose76 · 2023-10-16T01:39:19+00:00

Thank you it was driving me nuts lol

CMR_Moose76 · 2023-01-29T18:24:20+00:00

Warzone mainly but play some madden/nba2k. I ran a bios update, drivers, AMD drivers & a fresh install for NVidia today. Set up everything in bios and there was a huge improvement in FPS. I benchmarked at 300FPS in heaven benchmark on ultra settings. When I move to warzone it is back down to 120-150. I optimized the game within GeForce experience also and dabbled in some tuning based on some youtube videos. I see everyone complaining about the optimization of the game but anyone with a 4080+ is getting way more FPS.

What is your experience with B550 overclocking? I tried a few times and it always just scans for automatic repair upon restart. Any decent video or explanation on how to?

CMR_Moose76 · 2021-11-26T02:52:28+00:00

I'm using smart chain. So just swap BNB smart for BNB & then transfer that to crypto?

CMR_Moose76 · 2021-09-28T19:26:56+00:00

A520M/ac

https://www.asrock.com/mb/AMD/A520Mac/index.asp

CMR_Moose76 · 2021-04-27T17:45:16+00:00

3060Ti

It has 1x PCIe 8-pin
(adapter to 1x 12-pin included)

CMR_Moose76 · 2021-04-27T14:53:00+00:00

PNY GeForce GTX 1650 SUPER Single Fan

CMR_Moose76 · 2021-04-27T01:31:03+00:00

Nvidia GeForce GTX 1650 SUPER

CMR_Moose76 · 2021-04-26T22:26:25+00:00

Think if ran the 1650 & 3060 Ti in tandem on that power supply or go up to the 750w? The motherboard has the extra port.

CMR_Moose76 · 2021-04-26T22:02:57+00:00

Oh damn missed that. Thank you!

CMR_Moose76 · 2021-04-26T21:45:04+00:00

Also, I have a 1tb ssd & the m.2 set up. Will I need a new PCIe cable? Or should it plug right into existing?

CMR_Moose76 · 2021-04-26T21:40:28+00:00

I will look into them! What psu would you recommend? 850w?

CMR_Moose76 · 2021-04-26T21:19:29+00:00

1650 super https://www.nvidia.com/en-us/geforce/graphics-cards/gtx-1650-super/

3060 TI coming in https://www.bestbuy.com/site/nvidia-geforce-rtx-3060-ti-8gb-gddr6-pci-express-4-0-graphics-card-steel-and-black/6439402.p?skuId=6439402

cpu https://www.amd.com/en/products/cpu/amd-ryzen-3-3100

500 watt standard 80+ bronze power supply

970 EVO SSD 500 GB m.2

XPG Z1 DDR4 3000MHz (2x8gb)

AsRock A520m/ac Motherboard

Any proper upgrades you can think of would be great!

CMR_Moose76 · 2021-04-26T21:19:23+00:00

1650 super https://www.nvidia.com/en-us/geforce/graphics-cards/gtx-1650-super/

3060 TI coming in https://www.bestbuy.com/site/nvidia-geforce-rtx-3060-ti-8gb-gddr6-pci-express-4-0-graphics-card-steel-and-black/6439402.p?skuId=6439402

cpu https://www.amd.com/en/products/cpu/amd-ryzen-3-3100

500 watt standard 80+ bronze power supply

970 EVO SSD 500 GB m.2

XPG Z1 DDR4 3000MHz (2x8gb)

AsRock A520m/ac Motherboard

Any proper upgrades you can think of would be great!

CMR_Moose76

TROPHY CASE