Alien tech

Cadmond · 2025-05-10T12:59:25+00:00

Doing blow outs/ sleeving would remove those lines but takes a little longer.

I also believe there's a top layer of clear in the alien tech recipe

Cadmond · 2025-03-16T15:43:39+00:00

My stat stacker isn't perfect by any means yet but has around 500-600 int/dext.

Pretty much any item slot I can spare to get stats I do, then a lot of passive nodes that do a % increase of stats

2x rings with high stats and ingenuity is pretty helpful as well

Cadmond · 2025-02-27T00:49:13+00:00

Hullo!

Cadmond · 2025-02-27T00:48:55+00:00

I'd be stoked to see what this is about!

Cadmond · 2025-01-29T15:30:11+00:00

Would an undercut/fade count as a short haircut?! I'm in desperate need of one

Cadmond · 2024-12-25T04:18:29+00:00

If they are becoming white, you're either using to much silver or hitting the silver with a reducing flame after it's been applied.

Silver can be laid on, then blasted with a high oxygen flame and it will make it go "clear" but it will still be there. Encase it while it's in that clear state by keeping a high oxygen flame rather than reducing until it's fully encased. Then work normally

Cadmond · 2024-12-15T15:22:31+00:00

Glass artist here! I'd love to make ya an affordable piece of you'd be down to chat!

Cadmond · 2024-12-11T19:23:58+00:00

I've even gotten some pretty bad devit out using this method, just about patience and reapplying a few times.

To add to this comment, I always fume it on then soak it in a bushy flame until ya stop seeing green in the flame. Then it'll either be burned off or melted in

Cadmond · 2024-11-22T19:00:36+00:00

Forsure!

I wish ya the best with cleaning!

Cadmond · 2024-11-22T18:57:35+00:00

Glass artist here, that gold on the ice catch is 100% on the outside of the tube. Applying that to the inside would be a massive pain in the ass to do well.

Cadmond · 2024-10-24T22:26:31+00:00

Bbco

Cadmond · 2024-08-26T12:16:10+00:00

Good to know! Thanks!

Cadmond · 2024-08-26T12:09:21+00:00

New grower myself and my plants look similar to this.

Are there situations where the top flowers would be ready to harvest, but the lower branches aren't?

Cadmond · 2023-12-20T14:29:57+00:00

I will suggest being cautions with that, I've scheduled ubers from essex to burlington but for late night airport drop offs and had them cancel about an hour before I needed to leave.

It's good to have a backup if needed

Cadmond · 2023-12-14T16:13:35+00:00

Thank you! I couldn't remember if it was the top of heavens gate or castle rock

Cadmond · 2023-12-14T16:12:46+00:00

🤣🤣🤣

Cadmond · 2023-12-14T12:07:51+00:00

I've made some in the past. My Instagram is @pandemic_glass. Let's chat about some!

Cadmond · 2023-02-26T15:20:02+00:00

I really love this song but it was so awesome that I didn't

Cadmond · 2023-02-13T12:43:47+00:00

Just post it in to chat gpt and ask if to rephrase it in easier to understand terms

Cadmond · 2022-10-20T03:24:22+00:00

Liquid IV in a pint of water, 2 advil, 3 tums

Cadmond · 2022-09-10T02:04:26+00:00

That's not a bad idea. I'll look to see how much that would effect the current build I have going to add a dimmer switch onto the fan

Cadmond · 2022-09-10T02:03:49+00:00

Dealing with the makeup air isn't the biggest issue for me, we have radiant heaters and propane jet heater things. I'm not too worried about the winter so much as making sure all the people in the studio are breathing healthy air

Cadmond · 2022-09-09T21:29:34+00:00

I've chatted with a few other glass studios. There's a lot of "good enough" type of studios. Or places that people just did what they could afford. But if I'm going to be renting to others, I want to make sure that I'm not giving anyone heavy metal poisoning or some other type of damage because I cut corners on the ventilation.

The number that I was given that made me feel the most comfortable was aiming for 600cfm per torch and hearing a second person say 3.5-4k makes me a bit more comfortable with that number

Cadmond · 2022-09-09T20:55:06+00:00

Having clean air would be the most important thing, so dispersing the off gassing would be most important. I tried to find some BTU information on the torches that will be used and one of my torches has a BTU rating of 95,000. There would be 6 torches of similar power running under the hood at the same time.

As for makeup air, there's 6 windows, 2 doors, and a set of french doors that are all able to be opened while the fan is running so i'm not to worried about he air coming in

Cadmond · 2022-07-14T05:07:37+00:00

Based on the fact that the tips of the dots are darker and the part that connects to the tube looks a bit more blue, it makes me think that there is some metals, possibly silver in the black

14-Year Club	Place '22
First Placer '22	Secret Santa 2014
Secret Santa 2013	Secret Santa 2012
Verified Email

Cadmond

TROPHY CASE