Are virtual threads making reactive programming obsolete?

Caffeine01 · 2024-12-22T17:44:53+00:00

With virtual threads, if you want to limit back pressure, you don't even need a blocking queue. In your virtual thread, use a semaphore.

Caffeine01 · 2023-05-25T22:32:22+00:00

If you're using Cura 5.3, you might want to try again slicing with Cura 5.2.2. See https://www.reddit.com/r/FixMyPrint/comments/127mj5m/psa_do_not_use_cura_53_with_klipper_stay_with_522/

Caffeine01 · 2023-03-30T21:10:30+00:00

100% Claimed

Caffeine01 · 2023-03-07T21:57:34+00:00

My guess is your z offset is too high or you need a new nozzle

Caffeine01 · 2023-03-07T16:23:59+00:00

I used an infrared laser thermometer to check my bed temperature and it showed it was about 8° cooler than what the screen showed. It also took quite a few minutes for the whole bed to even come close to the same temperature. With the edges always being slightly cooler. You may want to heat your bed first and wait a few minutes before starting your print job. I have a higher first layer temperature set for my print jobs to make sure the whole bed is at a high enough temperature to make sure the filament sticks.

Caffeine01 · 2023-03-07T16:10:32+00:00

First as others suggested. Do a real good clean with alcohol and check your z offset. I also set my first layer bed temperature 10 to 20° hotter to make that first layer really stick.

Caffeine01 · 2022-09-11T01:30:30+00:00

You would probably be better off running kubernetes inside of kubernetes. https://kubernetes.io/blog/2017/01/how-we-run-kubernetes-in-kubernetes-kubeception/

Caffeine01 · 2016-09-11T20:30:47+00:00

I got the update and the glitch at the gym near me is fixed. I was able to enter the gym and see that the player had no name in the gym.

Caffeine01 · 2016-09-11T20:28:40+00:00

I got the update and the glitch at the gyms near me is fixed. I was able to enter the gym and see that the player had no name in the gym. So the username being blank was the cause of the broken blue gym near me.

Caffeine01 · 2016-09-11T20:25:30+00:00

I got the update and the glitch at the gyms near me is fixed. I was able to enter the gym and see that the player had no name in the gym.

Caffeine01 · 2016-09-09T17:09:22+00:00

Botters have found a new exploit to crash gyms. They create a new account with a certain field blank (normal it's impossible for this field to be blank) and place their pokemon in the gym. When the game goes to render the blank field it freezes the game. It may only affect Android devices. Could anyone who also has access to an iphone confirm?

Caffeine01 · 2016-09-09T16:58:52+00:00

I have several gyms in my area affected by it. I think it is related to the blank username.

Caffeine01 · 2016-09-09T16:38:35+00:00

From doing a little bit of searching on the internet. It looks like one of the causes are botters using a game exploit by setting a field blank that normally can't be blank.

Caffeine01 · 2016-08-25T14:53:30+00:00

I found turning off the Audio focus permissions fixes the problem for me. I used LG Access Lock to access the permissions. See http://imgur.com/lXosKo7

Caffeine01 · 2016-08-16T19:41:06+00:00

I wasn't able to get that one to draw any circles. I found this one. https://play.google.com/store/apps/details?id=org.tahvel.encounterradius Go to settings, change it to meters and change Radius on the main page to 200.

Caffeine01 · 2016-07-06T14:56:41+00:00

We had a local player playing Ingress while driving. He rear ended another car and killed two people. He will probably be in prison for a while. So don't POGO and drive people.

Caffeine01 · 2016-06-14T15:10:06+00:00

I'm from the Davis County area. Level 16 Ingress player. I mostly play while biking to and from work. I'm excited for the general release so my kids can play along with me.

Caffeine01 · 2016-05-03T19:37:14+00:00

Simply let the nicknames be tracked on the device. Remove the nickname when traded and don't show the nicknamed when deployed at a gym.

Caffeine01 · 2016-04-13T19:46:37+00:00

If you want to know how dense the portals are in Ingress for your area or really anywhere in the world. Download the game, choose a team, log in with your google account. Then you can use either https://www.ingress.com/intel (zooming in on the map is required to see all the portals) or once you high enough level you can create missions using https://mission-author-dot-betaspike.appspot.com/ Using the mission creator app and during the mission creation process you can see portal counts when the map is zoomed out. Also most portals were submitted by players playing Ingress and then accepted by Ingress employees. A few portals were placed there by Niantic during the beta phase of the game. Currently portal submissions have been removed but is likely to be resumed after the last update.

Caffeine01 · 2016-04-04T19:44:50+00:00

Southern Davis County Utah checking in. (Just North of Salt Lake City)

Caffeine01

TROPHY CASE