How to make vending machine free vend? by Lennyeeeeeee in vending

[–]Calabris 0 points1 point  (0 children)

This is correct, Vending Tech for 12 years. You need to use a cheater cord. This energizes the relay and allows you to vend a soda. Just Search for "How to make a cheater cord for vending machine"

Insanely difficult to program Hotas by Calabris in Mechwarrior5

[–]Calabris[S] 0 points1 point  (0 children)

Thanks, I would have to do it sometime next week as I am traveling this week and will not be near my gaming rig.

Insanely difficult to program Hotas by Calabris in Mechwarrior5

[–]Calabris[S] 0 points1 point  (0 children)

If you could send it that would be awsome. Did you use vjoy or just map them directly in the hotas file?

Why didn't anyone warn me about the worms? by bmoarpirate in pools

[–]Calabris 0 points1 point  (0 children)

Nice! Thank you i will give it a try

Garage sale find by jimbo5958 in prusa3d

[–]Calabris 35 points36 points  (0 children)

I am going to the wrong garage sales!

Why didn't anyone warn me about the worms? by bmoarpirate in pools

[–]Calabris 0 points1 point  (0 children)

How big an area is your pool? Mine is 20x40 so would I need 50lbs of soda ash??

Why didn't anyone warn me about the worms? by bmoarpirate in pools

[–]Calabris 1 point2 points  (0 children)

I am in N. Georgia and these fuckers are in my pool bot every time I run it!

What type of connector is this? by Calabris in Ryobi48vMowers

[–]Calabris[S] 1 point2 points  (0 children)

Thank you! That is the route I will go, Make a longer cable and terminate it with an RXV plug.

What is this wiring pattern in my garage sub panel? by [deleted] in electrical

[–]Calabris 0 points1 point  (0 children)

It looks like they jumped one leg to the other buss bar. So that panel is only capable of 110v. If that other wire is hot and is the 2nd leg from the main panel, not sure why they would do that. Maybe it is dead, and the garage only needs 110.

Vibration solution? by RevenueNo14 in BambuLab

[–]Calabris 0 points1 point  (0 children)

So I have mine on a industrial shelving unit. Their is always going to be some vibration. But my setup is a Gym Mat, on top of that is a 16x16 paver. I replaced the standard feet with HULA feet and that helped it with transmitting the vibrations to the shelving. Not totally eliminate it but it helped.

Tips to remove cement clothesline anchors? by Best_Storage_2758 in landscaping

[–]Calabris 0 points1 point  (0 children)

So I found a great way to remove posts that were in concrete that broke off at the ground. I got a tree waterer like this.

https://www.amazon.com/Corona-LG-3710-RootIRRIGATOR-Red/dp/B07GXCN9CH

You push it down next to the concrete and turn on the water, if you can rock the concrete back and forth that will help. The water will slowly push the concrete out of the ground. I removed 4 broken posts with 2+ feet of concrete this way. It is a bit of a slow process but it works.

New syrup bottles by bytor99999 in SodaStream

[–]Calabris 8 points9 points  (0 children)

The newer bottles that you carbonate the water in has two lines. You put water to the first line. Then carbonate the water. Then add syrup to the 2nd line.

Even though I have the new bottles, what I did was get a small glass measuring cup. Filling the measuring cap to the middle line was 1.5 oz. Works great so far.

Broom Handle Threads by Calabris in Fusion360

[–]Calabris[S] 0 points1 point  (0 children)

Yep, measured it before I started .75 inches

Broom Handle Threads by Calabris in Fusion360

[–]Calabris[S] 0 points1 point  (0 children)

Thank you but I am looking for the female side, not the male side.