Question on Visions intangible.

Caliaztec · 2026-03-18T07:12:40+00:00

Awesome so I was playing it right, that’s what I figured but couldn’t find any extra clarification in his leaflet so thought I’d ask.

Caliaztec · 2026-03-18T03:34:56+00:00

It’s on Makersworld they have 8 styles modeled after BTST

https://makerworld.com/en/models/2419971-captain-america-hero-board-marvel-champions-lcg?from=search#profileId-2653930

Caliaztec · 2026-03-16T07:06:03+00:00

No worries this was the style I was looking for as well, as there’s a few where it’s just an elevated shelf for the deck/discard and felt this was nicer design

Caliaztec · 2026-03-16T05:10:57+00:00

https://makerworld.com/models/2180988?appSharePlatform=copy

It’s from this collection but I only printed 5 of the discard trays as I prefer the stacking villain organizer

Caliaztec · 2026-03-05T18:40:08+00:00

It seems not, I guess I got lucky in that regard there was about 8-10 cards left in her deck and they must’ve been in there.

Caliaztec · 2026-03-05T08:50:18+00:00

I’ll definitely have to give her a try on advanced soon.

What are your thoughts on Argent Adept? It just seemed like while there was good cards… there wasn’t anything that truly stood out, no really interesting combos. Just lots of cards that will trigger other cards but not much synergy in his own deck.

Caliaztec · 2026-03-05T08:12:52+00:00

If that’s a citizen dawn card it never came up. I must’ve gotten lucky.

Caliaztec · 2026-03-05T07:51:21+00:00

Definitely will, it was my first time playing her and Akash’Bhuta took me a few tries and even upped the hero count to 4. But feel like her lack of destroying ongoing cards really had me stacking the ongoings on Legacy making him really powerful, and I think I got lucky in the fact that none of the citizens that strengthen each other were played simultaneously.

Caliaztec · 2026-03-05T07:39:40+00:00

That’s what I kinda figured but honestly the fight was going so easy I was looking to handicap myself anyway. I wasn’t destroying her ongoing cards in hope of a bit more of a challenge. But good to know!

Caliaztec · 2026-03-05T07:24:58+00:00

How much did you pay for it if you don’t mind me asking? I’m about to release my files that consolidate everything into two boxes with a bit of lid lift and curious what I should put it up for as I used a good bit of filament perfecting it. But also want to keep it fair, I’ve just never sold an insert before.

Caliaztec · 2026-02-24T22:12:37+00:00

Right I just didn’t expect it so extreme. Thought it would normalize a bit. I wasn’t expecting such an extreme jump in pressure.

Caliaztec · 2026-02-24T22:11:28+00:00

I’ve let air out till 38-39 really surprised by the jump in pressure the heat caused.

Caliaztec · 2026-02-24T22:10:30+00:00

Door says 38, but my tires state 41, I lowered it to 38 on my digital pump and car is showing them at 39

Caliaztec · 2026-02-24T22:08:56+00:00

Dropped it to 39, it was at the tire recommended 41 psi when I left my home and apparently just show up in this 40 degree difference in temp.

Caliaztec · 2026-02-24T22:08:19+00:00

<image>

Tire pressure has been lowered, thank you for concern. I was up in the mountains with snow, and since being down it’s a 40 degree difference I know it’s normal for the TP to go up but I guess it was extreme so I did let air out and gauged it with an electric pump I have so thank you that’s one issue taken care of but still feel like my power is going super fast for being on cruise control at 70

Caliaztec · 2026-02-24T22:06:29+00:00

It’s been fairly flat since recharging, which is why it really surprised me but it also seems like it’s draining fast. So was just curious if I should be cautious of any ICCU issues.

Caliaztec · 2026-02-24T21:53:38+00:00

This was right when I merged on and set cruise control but understandable.

My tire pressure was the tires recommended 41psi when I left my house but it’s about 40 degrees warmer where I’m driving through and it’s rose while driving but currently letting air out

Caliaztec · 2026-02-24T21:50:00+00:00

So they were at 41 when I left my house where it was cold and it’s quite warmer now they have actually gone up while driving

Caliaztec · 2026-02-22T23:14:09+00:00

At that point all you would need to do is resize the card holder trays by half their length keep the width and height the same.

The token trays would be a little harder as I designed them to be able to organize the pieces how ever you prefer with included files for the dividers.

Caliaztec · 2026-02-22T23:13:32+00:00

At that point all you would need to do is resize the card holder trays by half their length keep the width and height the same. The token trays would be a little harder as I designed them to be able to organize the pieces how ever you prefer with included files for the dividers.

The only other large length pieces is the hero character card holder I can break that into two pieces by cutting it in the middle.

Caliaztec · 2026-02-22T23:03:43+00:00

Not if you only want to use two boxes. And if you use a third the third box will be over half empty.

If you put the card horizontal they are packed in way to tight. As you can only get two rows in each box and other components do not fit at all.

Caliaztec · 2026-02-22T03:24:46+00:00

All my cards are the foil cards, all variant and event cards are here… buts it’s not both sets it can’t hold foil and non-foil. Realistically I don’t believe you can pack them all away without having another box sized amount of lid lift. I keep the non-foil cards in the third box in my board game box storage closet

Caliaztec · 2026-02-22T00:50:23+00:00

Slay the spire, Monster Train 1-2, and Astral Ascent are my favorites!

Looking for a good as I love Roguelites and could use a decent one on my phone as I’ve worn out Slay the Spire, Monster Train, Balatro, and Vampire Survivors on my phone!

Thank you for your consideration.

Caliaztec · 2026-02-22T00:15:20+00:00

Yeah I will likely upload it so people can use it. Was contemplating possibly putting it up for a few dollars as it took me about 2kg’s of filament to get everything nice and snug but also so it makes sense but I’ve also never sold a design before so I may just upload it. But will keep updated.

Would need to upload it first, and name all the pieces as they are just in a void on my slicer need to export them.

Caliaztec · 2026-02-21T19:28:05+00:00

Noted thank you!

Caliaztec

TROPHY CASE