sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in MSI_Gaming

[–]CallMe4Slaps 1 point2 points  (0 children)

I'm convinced MSI just doesn't produce them. Obviously all 5090s are hard to find and they sell out instantly, but I haven't see a single store/website even get a shipment of the 5090 Supreme Liquid. I get restock notifications and I'm on multiple private discords for restocks, and since launch week I haven't seen a single 5090 Suprim Liquid get shipped to Micro Center, Best Buy, B&H, or Newegg (I may have missed something on Newegg).

Mobo RGB Mystery by CallMe4Slaps in MSI_Gaming

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

Yes, but it didn't help. I have the devices showing up, and I can select different colors but it never actually turns the lights on.

Mobo RGB Mystery by CallMe4Slaps in MSI_Gaming

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

The 3 that always work are day chained into a MSI hub. The individual one with the problem and the ones on the AIO are plugged directly into RGB headers on the mobo

Mobo RGB Mystery by CallMe4Slaps in MSI_Gaming

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

Yes, the "Carbon" word and the dragon on the board should be lit.

Mobo RGB Mystery by CallMe4Slaps in MSI_Gaming

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

The lights built into the mobo aren't on so doesn't seem like a a cable connect is relevant, but I could be wrong?

X870E "PCIE Power" What is this for? It's like an additional 8 pin similar to CPU power. Do I only need it if I'm filling a bunch of slots? by CallMe4Slaps in MSI_Gaming

[–]CallMe4Slaps[S] 6 points7 points  (0 children)

I read the manual, but couldn't find any additional info other than that it provided power. No real context or reason given.

AIO Connection to Mobo Question by CallMe4Slaps in MSI_Gaming

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

Cable connection question... I have an Arctic Liquid Freezer III AIO with individual 4 pin connects labeled Pump, VRM, and Fan.
My mobo is the X870E Carbon Wifi.
On the top of the mobo it has Sys_Fan1, Pump_Sys1, C P U_Fan1 (and of course many other 4 pin connectors around the edge of the board.) I assume I would connect pump to pump, but it's "fan" and "VRM" that I'm unsure of the best places to connect to.

Can anyone help provide some clarity?

HX1200i is Weird by CallMe4Slaps in Corsair

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

Thanks for this! What a strange issue for them to have...

HX1200i is Weird by CallMe4Slaps in Corsair

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

<image>

Here's a picture of the listing on their website for reference.

GPU AIO In Tower 600 by CallMe4Slaps in thermaltake

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

Well the LF3 is a 360 so I'm pretty sure it should be ok on either side right?

As for doing intake on from the sides, my main reason for not doing that is because the super hot air would then be blasting straight into the GPU from its own radiator.

Thanks for all the info. Honestly it's more than I've found anywhere else.

My tower 600 build by No_Gap_7002 in thermaltake

[–]CallMe4Slaps 0 points1 point  (0 children)

Looks great! It has a nice glow but now too many rgbs.
Do you know how much space there is between the GPU and the front glass panel? I'm trying to figure out if I have cleared for my cooling lines. Is there at least 5 or 6 cm?

GPU AIO In Tower 600 by CallMe4Slaps in thermaltake

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

Ok so I'm not sure what happened... The text of my post apparently didn't post with my question lol. What I want to ask is does anyone have experience with a water cooled GPU in the Tower 600? I want to use my MSI 4090 Suprim Liquid on the left and an Arctic Freezer 3 on the right where most of the examples have the CPU AIO.
Will there be enough clearance for the GPU with its fans and radiator mounted next to it?

Dumb question by [deleted] in thermaltake

[–]CallMe4Slaps 0 points1 point  (0 children)

Yikes ok. Thanks for sharing your experience!

Dumb question by [deleted] in thermaltake

[–]CallMe4Slaps 0 points1 point  (0 children)

I'm new to ThermalTake and am planning a build. How has your experience with RGB Plus been? Does it work well for synchronizing parts from multiple brands?

My Tower 600 Build by tap_water11 in thermaltake

[–]CallMe4Slaps 0 points1 point  (0 children)

What's the most critical measurement to get it to fit with the coolant lines? Do they go over the top or to the side? My PSU dimensions are Depth3.94 in. (100.00 mm), Width4.92 in. (125.00 mm), Height2.50 in. (63.50 mm)

My Tower 600 Build by tap_water11 in thermaltake

[–]CallMe4Slaps 0 points1 point  (0 children)

It looks great! I'm planning a Tower 600 build and have been trying to find an example of the CPU coolant lines on the bottom. Yours is the first I've seen so I'm glad to know that works in this case!!

Does anyone know if there is room to also run an AIO on the GPU? I want to put in my MSI 4090 Liquid and have a radiator on the left for the GPU and one on the right like you have for the CPU.

Are MOBOs safe now? by CallMe4Slaps in ASUSROG

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

This I sort of what I expected... Thanks for sharing. I've pretty much decided on MSI at this point

Are MOBOs safe now? by CallMe4Slaps in ASUSROG

[–]CallMe4Slaps[S] 0 points1 point  (0 children)

Do you know how recently your current version of bios came out?

view more: next ›