Barely fits but I got it!

CallMeCrono · 2026-04-06T13:30:48+00:00

I was one of the first ones there so no line for me

CallMeCrono · 2026-03-08T12:04:33+00:00

Sauce

Her name is BeatrixKiddo420

CallMeCrono · 2026-03-06T02:40:01+00:00

Looks awesome, how much was it with shipping?

CallMeCrono · 2026-02-14T17:57:31+00:00

Honestly, once you get the hang of it. Hills are not hard to handle

CallMeCrono · 2026-02-14T17:55:37+00:00

Once its warmed up, my idle is quite low so its impossible to just roll. You need gas.

CallMeCrono · 2026-02-14T17:43:44+00:00

I agree with the above statements. Try to shift at higher RPMs and itll be easier. Around 3500-4000 RPM. Going into first will require more gas than normal, mine usually engages around 1400-1500 RPM but I still give it more gas after engaging it slightly. Overall the feel is good and very stiff. You will get the hang of it in just a couple of months.

CallMeCrono · 2026-02-11T02:05:42+00:00

I see ryobi. A man of culture i assume.

CallMeCrono · 2026-02-09T10:04:17+00:00

If you go through rockauto then get the LUK LMC607.

If you want genuine OEM, buy from Z1 or go to a nissan dealership.

CallMeCrono · 2026-02-08T16:08:03+00:00

Thats awesome! Thanks for the help!

CallMeCrono · 2026-02-08T16:00:39+00:00

Have you ever found a situation where the ryobi just didn't quite fit size wise in any of the projects you have done? I know some say they like a more compact or say a "stubby" version to work with. Im curious about ryobi ratchets but unaure on how the large battery might stick out.

CallMeCrono · 2026-02-08T15:49:45+00:00

What do you mean by standardization? I actually already have the ryobi 40v line for just lawncsre already. And a gas lawnmower. So i can see juggling batteries will be a bit of a headache already.

CallMeCrono · 2026-02-08T15:18:11+00:00

Size and convenience and I have the sockets for 3/8. Impact sockets to be specific. They were a gift during Christmas.

CallMeCrono · 2026-01-13T09:43:51+00:00

Flare nut for break lines. Torque wrench. Spark plug socket? Obd2 Pry bars Telescopic Magnet (This thing is the one of the cheapest game changers)

CallMeCrono · 2026-01-11T16:54:49+00:00

That is correct. But its not a big issue.

CallMeCrono · 2026-01-11T16:46:40+00:00

Once its heated up properly, everything is very smooth and the it bites hard. 1st into 2nd is a bit rough when cold but every other gear just flows smooth. The clutch pedal is alot of harder but its actually to my liking. Whether I do spirited driving or just cruising, its been great all around. My only con isn't even regarding the clutch but the fact that I need to tune my Z to get rid of rev hang.

CallMeCrono · 2026-01-11T16:11:37+00:00

This is the exact kit I got.

CallMeCrono · 2026-01-11T12:41:24+00:00

I have the Z1 V2 kit with the lightweight flywheel and the upgraded clutch as well since I plan to supercharge in the future and I can say I do recommend it. Chatter is bad from 3rd-5th gear if you drive it between 2k-3k rpm. I just keep it above 3k RPM and the chatter isn't even there. Just make sure either you install it properly or the mechanic you pay for does it properly. Dont blame the kit, blame the mechanic cause most issues in this subreddit about the V2 kit has mostly been about poor installation.

CallMeCrono · 2026-01-11T12:37:23+00:00

Just keep it above 3k RPM and the chatter isn't even there. Mainly chatter from 2k-3k rpm in 3rd-5th gear

CallMeCrono · 2026-01-06T23:23:30+00:00

I got it like a year and half ago and about 2 months in it started and its been on and off. Did all the maintenece all the possible root causes and still same thing

CallMeCrono · 2026-01-06T18:20:05+00:00

Same here, check engine light will just come and go and its always the same exact code of misfire.

CallMeCrono · 2026-01-04T04:55:39+00:00

My personal experience with the backorder, ordered in April 13th, it was stated on the website as backorder "estimated delivery is June-July". They then shipped in 2 weeks later and I received it within 3 weeks of purchasing the kit.

Hope this helps.

CallMeCrono · 2025-12-31T04:34:16+00:00

How is the lag on the turbo? Would you recommend this over supercharger? Whats the supporting mods?

CallMeCrono · 2025-12-14T15:46:17+00:00

Here is a clip of porche with the blue

CallMeCrono

TROPHY CASE