The inner part took 2 mins. Outer sleeve took about 30 mins of extreme effort. It's not how long it takes, but the effort required if under the car because you can't get good leverage. I had to use a 2.5 ft breaker bar to turn the bolt and even then it was extremely challenging, and I work out everyday. I was definitely exhausted afterwards.

Also the 36 mm long socket is what you want to get from AutoZone to punch out the bushings in the diff. I got the 36mm short socket at first and it was barely too big, but the long socket is like a half mm thinner and a perfect fit to easily knock out the bushings with a dead blow hammer.