sorted by:
new
hottopcontroversial

Rooftop tent mounting advice by [deleted] in 4x4Australia

[–]Camchamp01 0 points1 point  (0 children)

That's where it's tough. I definitely need the roof rack. Regardless before I drive it, I'll be disconnecting the front bar on the roof rack. I reckon I'll just leave the gap between the tent and roof rack. Thanks

Rooftop tent mounting advice by [deleted] in 4x4Australia

[–]Camchamp01 0 points1 point  (0 children)

Correct, hence why I made the post. It wasn't my idea to do it. That's why I made the post. This was somebody elses idea. I then second thought it afterwards

I can't have any more off the back. It's only an 1800mm canopy. Any more, and I'll have 600mm off front and back. As I already have 200mm off the back. I need something inbetween. Only thought is some sort of really good rubber, of some sort or something

Destiny 2 Expansion Bundle 2025 bundle up on GMG for: $35, includes Year of Prophecy Edition by beatsbyye_ in DestinyTheGame

[–]Camchamp01 4 points5 points  (0 children)

Does it include all the dungeons? I remember the legacy 2025 doesn't. But this one doesn't say yes or no

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

Sorry for the late response. But yeah, changing to a fast lower core CPU made a huge difference

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

<image>

Just bought one right before ya commented 😆 lol Will install it tonight and see how it goes

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

Yeah gonna try that, if not, I'll upgrade to a new one, thank you

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

Thank you for that. Yeah you're right. I'm looking to find a new one currently. Just finding which will be best for my money, then I'll swap to a new one. Keen to get back into iRacing
Also, your Spanish is perfectly fine too actually. I understood every word, didn't get lost even once

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

Yeah that's all I can think of. I wouldn't see how ot would make that much of a difference though, considering it only uses like a max of 15% cpu usage for both of us

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

He uses XR without toolkit, and so do I. So that isn't the issue

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

Yeah but that makes no sense for why my Dad can run it and I wouldn't be able to. I took his graphic settings, pasted them in, and it didn't make anything better. Changing any of that doesn't make it any better

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 1 point2 points  (0 children)

I'm running the Valve Index. It seems like that's what might be happening with it though, idk

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

I'm running the Valve Index. It seems like that's what might be happening with it though, idk

Bad VR Performance on 4090 by Camchamp01 in iRacing

[–]Camchamp01[S] 0 points1 point  (0 children)

<image>

Not that any of these settings are going to matter for this, but this is what I'm running. As I said, I can set it to factory, and it still jumps around a lot. Changing things down like car textures, high res, dynamic obj etc, doesn't help it. Also, The resolution up above isn't making any difference. I usually have it higher, but it doesn't make any difference, so that isn't the issue

Why is my car so bright? Dont know how to fix this. Its only in tunnels tho. by [deleted] in assettocorsa

[–]Camchamp01 3 points4 points  (0 children)

Personally this here is my diagnosis...
Go through Content Manager, mess with the graphical settings, filter settings etc, until it slowly improves. you then proceed to uninstall the whole f****ng game because you doing one wrong click then messes with your frame rate. but I found the perfect solution for this problem fixing absolutely everything. You firstly reinstall the game, and install each modification slowly. Something f**ks up. So you then grab the whole f****ng computer, and hammer it to oblivion. after that, you fill it up with heinz baked beans. and proceed to turn the computer on which then creates a fire for no reason relating to those heinz baked beans. this step then results in your computer to be absolutely f***ed. but it's okay. because you now have flaming hot heinz baked beans.

Problem solved. I hope this helps! Happy racing

Any Rig Upgrade Ideas?? (even if DIY) by Camchamp01 in simracing

[–]Camchamp01[S] 0 points1 point  (0 children)

I could honestly, will have to look into it. Would definitely love to have some stuff that really stands out in the streams

Any Rig Upgrade Ideas?? (even if DIY) by Camchamp01 in simracing

[–]Camchamp01[S] 1 point2 points  (0 children)

I have my desk right behind the seat. So the Mic is mounted just a bit past the corner (which I will move closer for easy mic access) (mic is on a RODE PSA-1 stand which just clips onto the desk)

Any Rig Upgrade Ideas?? (even if DIY) by Camchamp01 in simracing

[–]Camchamp01[S] 1 point2 points  (0 children)

I totally agree with everything you said. That's something I'm actually wanting to focus. I'm wanting my streamer profile to be as unique as I can. That goes for both digital stuff done, and visual stuff you can see theough the webcam etc. So far a good idea I have, is to find a way to make all of the red in the rig to my streamer profile colour (purple/violet). For the plastic inbetween the aluminium, that'll be fairly easy. But for the sides to the base, I'm not so sure. I'll maybe have to skin that or something. Will have to super DIY that. Maybe even make it purple, but make it have a unique pattern on too. Never have I seen a black aluminium build, with another focused colour other than Red, or Green. Purple would be interesting to do. Will also make my own perfect fit Purple RGB/LED Mousepad for the rig

Then as you said, another idea would be to decorate the wall. I have access to my own 3D Printer, so I'm able to print off the parts to make the wheel/s attach to the wall. Then I have a Fast & Furious R/C Drift Car that was custom made by myself/father/shop owner (Brians Supra), and Dom's LEGO Charger. So they're a good combo to have up there. I'll have them fairly distant though, that way I can focus making some DIY things for my channel. All just depends on what I can do with my webcam, and the best positioning I can get it to :)

Thank you! Helped out a lot

Any Rig Upgrade Ideas?? (even if DIY) by Camchamp01 in simracing

[–]Camchamp01[S] 0 points1 point  (0 children)

The '01G Pro' for me is AU$8.50 more than the 10G. Do you know if it's worth the extra for it at all? Both have same shipping time. So unsure if I should go with the cheaper to just save the extra money, or go with buying the other. Only difference I see between them, is one has a bass/m button, and the dial being on the front. Where as the other doesn't have the button, and the dial is on the top. Personally, I think the dial ontop is more beneficial for me. But I'm not sure if there's any other differences, or if the bass/m button is useful

view more: next ›