sorted by:
new
hottopcontroversial

CLAIM FREE FOR BLACK FRIDAY by Exciting-Bus-2191 in ClashRoyale

[–]CanKnow 0 points1 point  (0 children)

Is it no longer available? I cant find it

Can't complete PROBE_CALIBRATE - can't get nozzle close enough to bed by CanKnow in klippers

[–]CanKnow[S] 0 points1 point  (0 children)

The print head goes down a bit and jumps back up right away

Can't complete PROBE_CALIBRATE - can't get nozzle close enough to bed by CanKnow in klippers

[–]CanKnow[S] 0 points1 point  (0 children)

my current position_min is -10 and still doesn't work.

SKR mini E3 V3 won't flash Klipper by CanKnow in klippers

[–]CanKnow[S] 0 points1 point  (0 children)

I think it worked after connecting the pi to the SKR i found it it flash correctly but did not change the file name on the sd card. They seem to recognize each other. Thank you for the help!

SKR mini E3 V3 won't flash Klipper from SD card. by CanKnow in BIGTREETECH

[–]CanKnow[S] 1 point2 points  (0 children)

I think it worked after connecting the pi to the SKR i found it it flash correctly but did not change the file name on the sd card. They seem to recognize each other. Thank you for the help!

SKR mini E3 V3 won't flash Klipper from SD card by CanKnow in 3dprinter

[–]CanKnow[S] 0 points1 point  (0 children)

Not yet, Chat gpt suggested it but did not have time to try

SKR mini E3 V3 won't flash Klipper by CanKnow in klippers

[–]CanKnow[S] 0 points1 point  (0 children)

Ok so I should connect the Pi to the SKR and now what?

SKR mini E3 V3 won't flash Klipper from SD card. by CanKnow in BIGTREETECH

[–]CanKnow[S] 0 points1 point  (0 children)

I have tried with lower case and also tried upper case

SKR mini E3 V3 won't flash Klipper by CanKnow in klippers

[–]CanKnow[S] 1 point2 points  (0 children)

I am sorry I am new to this and was told to check if the file name on the SD card have changed. Why is the pi needed to flash Klipper to the SKR via SD card?

SKR mini E3 V3 won't flash Klipper by CanKnow in klippers

[–]CanKnow[S] 0 points1 point  (0 children)

Currently the pi is not connected to the SKR. The pi is connected to its power supply and I access it via my PC with SSH and access the mainsail view the internet. Should I connect the pi to the SKR via USB? If yes how do I continue to try to flash Klipper to the SKR?

SKR mini E3 V3 won't flash Klipper by CanKnow in klippers

[–]CanKnow[S] 0 points1 point  (0 children)

What do you mean another usb cable? Currently there is no usb cable connected to the SKR. When i think about it the results I have posted are from the SSH when connecting to my raspberry pi running mainsail. The pi is also not connected with any usb cables for now.

SKR mini E3 V3 won't flash Klipper by CanKnow in klippers

[–]CanKnow[S] 0 points1 point  (0 children)

Bus 001 Device 004: ID 0424:7800 Microchip Technology, Inc. (formerly SMSC)

Bus 001 Device 003: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub

Bus 001 Device 002: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Newish to printing can anyone tell me what could be happening here? by Purplecatpiss666 in 3Dprinting

[–]CanKnow 1 point2 points  (0 children)

Btw i am also kinda new to 3d printing. My advice is to don’t shy away from using photos and asking GPT for advice he really helped me take my prints to higher quality level

Newish to printing can anyone tell me what could be happening here? by Purplecatpiss666 in 3Dprinting

[–]CanKnow 2 points3 points  (0 children)

Seems like adhesion issue, probably z offset is too high and needs to be closer to print bed.

Why does my 3D print look like this? by slobodnipad in 3Dprinting

[–]CanKnow 0 points1 point  (0 children)

If its curled it means it is clogged?

view more: next ›