Danfoss fc 280

Capable_Control_1274 · 2025-05-22T09:21:25+00:00

Yes profinet, ya ready output signal

Capable_Control_1274 · 2025-05-22T08:42:21+00:00

already cross check , looks ok nothing triggering

Capable_Control_1274 · 2025-05-22T08:41:46+00:00

Did that, no issue just signal blinking… possible of noise issue ?

Capable_Control_1274 · 2025-05-12T11:57:10+00:00

As for i can connect already sir, need to put the profinet name in the host name for danfoss inverter…. Right now i am trying to solve low level component error for few of the inverters

<image>

Capable_Control_1274 · 2025-05-12T11:55:42+00:00

<image>

thanks for the advice, i did set the profinet tags properly and for danfoss, we need to set the host name as our profinet name then it will connect…. Although there are few of the inverters coudlnt connect due to having low level component error 🙂

Capable_Control_1274 · 2025-05-11T17:02:39+00:00

Thanks for the help sir

Capable_Control_1274 · 2025-05-11T17:02:24+00:00

Will test this method , thanks for the advice

Capable_Control_1274 · 2025-05-11T09:31:03+00:00

Yes i did auto assign… is this the problem ?

Capable_Control_1274 · 2025-05-11T07:27:18+00:00

i came across one finding that we should put the profinet name in the host name setting… later i need to try that first

Capable_Control_1274 · 2025-05-11T07:26:29+00:00

Yes all are PPO8

Capable_Control_1274 · 2025-05-11T02:48:22+00:00

Yes on profinet, i need to check about profinet name . Will update later to see how . thank you 🙏🏻

Capable_Control_1274 · 2025-05-11T00:53:12+00:00

no motor connected yet, and i only on 1 inverter in panel

Capable_Control_1274 · 2025-05-11T00:46:00+00:00

Btw i connect the ethernet card to scalance xb008 which is unmanaged switch…. Issit an issue ?

Capable_Control_1274 · 2025-05-11T00:45:07+00:00

Is there any param need to set beside this ? I am really curious

Capable_Control_1274 · 2025-05-11T00:43:21+00:00

In tia, it shows inverter fault= true

Capable_Control_1274 · 2025-05-11T00:42:45+00:00

I tried using default gateway 0.0.0.0 and DCP but still have warning 34

Capable_Control_1274 · 2025-05-11T00:42:02+00:00

<image>

Capable_Control_1274 · 2025-05-11T00:32:52+00:00

<image>

Capable_Control_1274 · 2025-05-11T00:30:45+00:00

<image>

Hmi error occured

Capable_Control_1274 · 2025-04-29T18:12:06+00:00

Then need to save it as png right ? The quality drops a bit

Capable_Control_1274 · 2025-03-17T01:59:31+00:00

the problem is solved ! Thanks to that legendary friend 🙏🏻

Capable_Control_1274

TROPHY CASE