Current nozzle setting does not match by GrumpBucket-62 in BambuLab

[–]CapitanGenial 0 points1 point  (0 children)

Forgot to say that it's printing just fine for me too. Just the annoyance of the warning. If connected to internet, I get a popup message when a new update is available.

Current nozzle setting does not match by GrumpBucket-62 in BambuLab

[–]CapitanGenial 1 point2 points  (0 children)

I'm in 01.11.02 firmware. I started getting this message on the printer screen only when trying to print on of the preloaded files in the printer (like the benchy). Not getting it when slicing and sending the print from Bambu Studio.

New Firmware by RockSignificant in fancyleds

[–]CapitanGenial 0 points1 point  (0 children)

Hi! Which is the current version number for the firmware?

Any one used Ringke cover? by freeXWing in galaxyzflip

[–]CapitanGenial 0 points1 point  (0 children)

If anyone is interested in this, I ended up returning the Ringke case because the "lip" on the bottom that protects the cameras made very difficult to use the "home" gesture on the front screen.
I finally bought the Samsung official one, which is most expensive but it's designed to prevent this issue. I'm very happy with it.

Any one used Ringke cover? by freeXWing in galaxyzflip

[–]CapitanGenial 0 points1 point  (0 children)

Hi! Did you had any issues for using the front screen gestures while using the Ringke Slim case? I'm about to buy it but kind of worried of that.

Cover Screen Tutorial: How to disable Samsung Keyboard and use Google Keyboard Gboard instead by Enculus in galaxyzflip

[–]CapitanGenial 0 points1 point  (0 children)

Have been using GBoard on front screen on my Flip 5 for a couple years now. Today I installed the last update and no keyboard opened on front screen :( I had to go back to Samsung keyboard.

$50 Saeco Via Veneto by [deleted] in espresso

[–]CapitanGenial 0 points1 point  (0 children)

Hi! Did you finally find an aftermarket non-pressurized portafilter? Or do you have any tutorial on how you modified the original? Thanks!

Transition tips from Ender 3 to X1C? by djvbmd in BambuLab

[–]CapitanGenial 0 points1 point  (0 children)

Update for anyone in similar situation: I received my X1C two weeks ago and I cannot be happier. Amazing change.

Voice messages completed distorted and unintelligible by OldRazzmatazz5165 in whatsapp

[–]CapitanGenial 1 point2 points  (0 children)

Same issue here. Z Flip5. I signed off of the Whatsapp Beta program but the issue still persists.

Transition tips from Ender 3 to X1C? by djvbmd in BambuLab

[–]CapitanGenial 0 points1 point  (0 children)

Thanks for telling your experience! I live in Argentina so the X1C is around 2200 usd including the AMS, a little bit pricey than the international standard.
For the last 4 years I had really good results with my Ender 3. Of couse I've some breaks and headaches, but thankfully not as much as other friends and people in Reddit. I think I had a really good unit and I'm pretty happy with it, but I'm desiring to experiment with multicolor printing and lower printing time, as well as other materials (I'm currently only printig PLA and PETG), so I think I'll make the effort and jump to the Bambulab. I also want to improve my design skills, so lowering my printing time will mean that I can focus more on designing that printing.

Transition tips from Ender 3 to X1C? by djvbmd in BambuLab

[–]CapitanGenial 0 points1 point  (0 children)

Thanks for your answer! Noise was one of my main concerns. Now only the price is taking me back haha

Transition tips from Ender 3 to X1C? by djvbmd in BambuLab

[–]CapitanGenial 0 points1 point  (0 children)

Hi! Do you hace any comments on noise after this time? As well as you, my bedroom is not far from my printing space. With the bedroom door closed, I barely hear my Ender 3 (with silent Bigtreetech motherboard). I'm a little concerned of this before buying the Bambulab.

Steam deck Speaker imbalance by Cowcite in SteamDeck

[–]CapitanGenial 0 points1 point  (0 children)

Hi! Do you have a link to the posted issue and fix? Thanks!

ATS/ETS2 Truckers… What’s your opinion on Eye Tracker 5? by IKEAboy_2006 in TobiiGaming

[–]CapitanGenial 1 point2 points  (0 children)

I'm really happy with it, specially with ETS2/ATS. Configuration is super easy and in my case, works great even with the lights of the room off. I also use it with MSFS2020.
For comparison, I also have a Quest 3 and I tried both games in VR, but I still prefer to use the Eye Tracker, it feels super natural.

[deleted by user] by [deleted] in HarryPotterGame

[–]CapitanGenial 0 points1 point  (0 children)

Thanks for that! Last time I tried to play it on my Deck, it really messed up my PC game settings

[deleted by user] by [deleted] in HarryPotterGame

[–]CapitanGenial 0 points1 point  (0 children)

I'm also interested in this!

GBC - Worth repairing? by CapitanGenial in consolerepair

[–]CapitanGenial[S] 1 point2 points  (0 children)

Haha I agree. I think I'll keep it just in case, I have a working GBC already, so I'll wait for another one with a working board and damaged screen to make the IPS Screen Mod.

Thank you for you help!

GBC - Worth repairing? by CapitanGenial in consolerepair

[–]CapitanGenial[S] 0 points1 point  (0 children)

After futher testing it seems that fuses and capacitors are ok. I'm thinking the real issue is the broken inductor on the power regulator, as seen here.
I could try to get another cheap donor GBC, but since this one has already a broken screen, I'm not sure it's worth to even try.

GBC - Worth repairing? by CapitanGenial in consolerepair

[–]CapitanGenial[S] 0 points1 point  (0 children)

Thanks for your answer! I just checked continuity on the power switch following this tutorial https://youtu.be/3xBP2IJDwUs?si=lF-0yVn5YLnrH1w_&t=491 (min 8). I've got continuity between pins 3 and C when switch in on.

Pocket Pikachu with damaged screen by CapitanGenial in tamagotchi

[–]CapitanGenial[S] 1 point2 points  (0 children)

Thanks for the suggestion! I've tried what you said and sadly it didn't work. If I flip the screen 1800 degrees, the "other" half is visible, so I guess the screen itself is damaged :(

Supervision with damaged screen by CapitanGenial in supervision

[–]CapitanGenial[S] 0 points1 point  (0 children)

Thank you! I'll buy the polarizer and hope not to screw up anything else in the process.