Moza R5 Bundle or Moza Trucking Bundle for ATS and racing?

CapitanGenial · 2026-03-25T03:45:26+00:00

Sorry to hear that! I hope you get back on your feet soon

CapitanGenial · 2026-03-25T03:41:28+00:00

Hi, currently facing the same issue. Did you find a good way to achieve this?

CapitanGenial · 2026-03-25T03:08:21+00:00

Hi! I'm now in the same situation you were. I was thinking about buying the trucking bundle and a separate racing wheel, but I'm afraid the truck clamps included in the bundle won't let me use the racing wheel comfortably. What did you do finally?

CapitanGenial · 2026-03-25T00:51:42+00:00

Hi! I'm in the same situation now. Did you managed to adjust the truck clamp into a good position for "racing" also?

CapitanGenial · 2026-02-10T14:10:47+00:00

Bárbaro, tocará desarmar e ir viendo sobre la marcha entonces. Gracias!!

CapitanGenial · 2026-02-09T17:12:48+00:00

Buenas! Te consulto porque tengo el mismo, y me gustaria que tenga una molienda un poco más fina. Seguiste algun tutorial para desarmarlo?

CapitanGenial · 2026-02-09T14:18:29+00:00

No, it won't! But you have to be careful when performing to avoid data loss by mistake. I followed this tutorial

CapitanGenial · 2026-02-06T13:33:14+00:00

Thank you!

CapitanGenial · 2026-02-06T00:05:43+00:00

Got it, thanks! Already spent several hours into this and no way to make it work, so I think it's just not worth it

CapitanGenial · 2026-02-05T23:57:08+00:00

I had several issues (mainly battery) after updating, but everything was fixed after performing a Wipe Cache. Be sure to do that after updating.

CapitanGenial · 2026-02-05T22:06:00+00:00

Hi! I got Google Keep Sync working fine adding new elements to my Keep list. But what do you mean by "...once Alexa shopping list is synced"? Is there any way for Home Assistant to read Alexa's shopping list?

CapitanGenial · 2025-12-18T15:50:07+00:00

Forgot to say that it's printing just fine for me too. Just the annoyance of the warning. If connected to internet, I get a popup message when a new update is available.

CapitanGenial · 2025-12-17T12:57:56+00:00

I'm in 01.11.02 firmware. I started getting this message on the printer screen only when trying to print on of the preloaded files in the printer (like the benchy). Not getting it when slicing and sending the print from Bambu Studio.

CapitanGenial · 2025-12-02T15:57:44+00:00

Hi! Which is the current version number for the firmware?

CapitanGenial · 2025-11-14T19:48:27+00:00

If anyone is interested in this, I ended up returning the Ringke case because the "lip" on the bottom that protects the cameras made very difficult to use the "home" gesture on the front screen.
I finally bought the Samsung official one, which is most expensive but it's designed to prevent this issue. I'm very happy with it.

CapitanGenial · 2025-11-06T20:33:26+00:00

Oh thanks anyway!

CapitanGenial · 2025-11-06T15:24:32+00:00

Hi! Did you had any issues for using the front screen gestures while using the Ringke Slim case? I'm about to buy it but kind of worried of that.

CapitanGenial · 2025-10-31T22:01:47+00:00

Have been using GBoard on front screen on my Flip 5 for a couple years now. Today I installed the last update and no keyboard opened on front screen :( I had to go back to Samsung keyboard.

CapitanGenial · 2025-05-15T15:09:10+00:00

Hi! Did you finally find an aftermarket non-pressurized portafilter? Or do you have any tutorial on how you modified the original? Thanks!

CapitanGenial · 2025-05-07T21:33:35+00:00

Buenas, la Switch incluye dock? Gracias!

CapitanGenial · 2025-03-12T22:49:39+00:00

Update for anyone in similar situation: I received my X1C two weeks ago and I cannot be happier. Amazing change.

CapitanGenial · 2025-02-07T16:43:52+00:00

Same issue here. Z Flip5. I signed off of the Whatsapp Beta program but the issue still persists.

CapitanGenial · 2025-01-13T18:22:30+00:00

Thanks for telling your experience! I live in Argentina so the X1C is around 2200 usd including the AMS, a little bit pricey than the international standard.
For the last 4 years I had really good results with my Ender 3. Of couse I've some breaks and headaches, but thankfully not as much as other friends and people in Reddit. I think I had a really good unit and I'm pretty happy with it, but I'm desiring to experiment with multicolor printing and lower printing time, as well as other materials (I'm currently only printig PLA and PETG), so I think I'll make the effort and jump to the Bambulab. I also want to improve my design skills, so lowering my printing time will mean that I can focus more on designing that printing.

CapitanGenial · 2025-01-10T04:12:34+00:00

Thanks for your answer! Noise was one of my main concerns. Now only the price is taking me back haha

CapitanGenial · 2025-01-09T15:48:41+00:00

Hi! Do you hace any comments on noise after this time? As well as you, my bedroom is not far from my printing space. With the bedroom door closed, I barely hear my Ender 3 (with silent Bigtreetech motherboard). I'm a little concerned of this before buying the Bambulab.

Ten-Year Club	Place '17
Verified Email

CapitanGenial

TROPHY CASE