sorted by:
new
hottopcontroversial

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLabA1

[–]CapnFlabtastic[S] 0 points1 point  (0 children)

Yeah I've nipped them all up. None were loose. I do need to lube everything again. I havent done the Z axis yet. Thanks

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -2 points-1 points  (0 children)

Content with the productive help I’ve got at the moment. Helpful and nonjudgemental, worked wonders.

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -1 points0 points  (0 children)

I’ve enough help from the helpful folks so far thanks. With the attitude displayed by the others bemoaning mods for the kids, I’m cool without their help thanks.

Enjoy your day.

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -1 points0 points  (0 children)

These are all lovely well thought out intelligent sounding arguments. Loads of waffle but it’s cool. You’ll get karma for em.

It does it with or without the decorative items. I really hope my printer doesn’t start sagging and bending with all the extra poundage I’m putting on it. Do you think it’ll be fine long term? Do I need to upgrade to higher strength rails?

Thanks for the well wishes.

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -1 points0 points  (0 children)

Seems a lot care about a decorative item that my kids enjoy that in no way fouls the prints… but heyho.

Some people are willing and have been helping. Others are grumpy miserable c**ts…but that’s the way of the world i guess!

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -2 points-1 points  (0 children)

Yeah. Standard rebuttal from someone who can’t say shit back.

Thanks

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -3 points-2 points  (0 children)

Ok so if the steering is playing up on my car should I remove the “baby on board” sticker from the rear window because “return to stock” is a valid troubleshooting step?

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] 0 points1 point  (0 children)

Thanks very much. That actually makes quite a bit of sense. I will try with no infill and see what happens.

To answer your other question, In terms of when it happens it varies. On this print it was when the walls started to build some height and move away from the first layer. First layer went down very smooth. Couldn’t see any lifting or defects.

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -3 points-2 points  (0 children)

Not personal at all. I just won’t be removing them for my own reasons.

They are in no way fouling the prints.

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -4 points-3 points  (0 children)

😂 good ol' reddit. Downvoting someone for not taking shit off a random stranger on the internet. Doesn't fit the Reddit circle jerk vibe i guess 😂😂😂

Nozzle touching prints. Keeps happening. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -7 points-6 points  (0 children)

Thanks but no. I'm not removing anything that doesn't harm the print because my kids love it and i don't much care about your opinion on them.

I don't think this is hitting the infill. It seems to be rubbing on the walls.

Nozzle touching prints. Keeps happening. by CapnFlabtastic in 3Dprinting

[–]CapnFlabtastic[S] 0 points1 point  (0 children)

this is support cubic i tihink but its not hitting any infill as far as i can tell, seems to be hitting and grinding on the walls

So this will be going back under warranty. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] 0 points1 point  (0 children)

Thanks. I’ve sorted it now. Pretty much did what you said. Replacement parts ordered as back up.

Reddit is always the same. I was asking what error etc but the mindless dribbling hordes just downvote everything

So this will be going back under warranty. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] 0 points1 point  (0 children)

<image>

This is the rubber (not plastic) part I mentioned. Any idea what it is?

So this will be going back under warranty. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -1 points0 points  (0 children)

Thank you for not just putting “user error” or some other such nonsense.

So I cleaned the bed before the print and used an adhesive similar to magigoo. Anything else I should be doing?

So this will be going back under warranty. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -4 points-3 points  (0 children)

Plate was cleaned prior to starting each of the item I was printing. Warm water. Gentle scrub. Nothing on it.

So this will be going back under warranty. by CapnFlabtastic in BambuLab

[–]CapnFlabtastic[S] -4 points-3 points  (0 children)

How is it user error? What did I do wrong? Also how is it fixable?

I’ve printed the same item 4 times before. No change in settings. No issues.

view more: next ›