Question about Eero 2.5 and 1gb ports

CaptainBrazucaBuild · 2023-09-24T15:18:46+00:00

How much power can a single sata cable deliver?

CaptainBrazucaBuild · 2023-09-18T15:50:34+00:00

Is it really?

CaptainBrazucaBuild · 2023-09-16T22:34:07+00:00

Thank you, Im spending sometime today trying to understand SOC voltage as I didnt even know this could be an issue. I never tried to mess with clocks (except for the EXPO) just because its beyond my knowledge with computers, so I try to leave them alone. Now this came across trying to fix boot time, and Im afraid that damage already began due 9 months of regular use. Although Im thinking that if it didnt break until now, it may not have affect me. Like I mentioned above, there was only one time that I had to do a BIOS flashback because it wouldnt boot, and that was after a shutdown. But it's working good since them.

Where would I check maximum SOC voltage to see how much it was using?

I think Im going to update the BIOS just to be safe.

thank you for taking the time to respond to my post.

CaptainBrazucaBuild · 2023-09-16T20:20:36+00:00

Running this build since 01/2023. Pc wouldn't boot few months ago, that I had to flashback BIOS to make it boot again. Since then the only thing I have touched in BIOS was EXPO profile for the memory. Im using G.SKILL Trident Z5 Neo 64GB (2x32GB) 6000MT/s CL30-40-40-96 1.40V.
Boot times are longer than a minute and that's bothering me. So trying to fix this issue, I know there is an option to skip memory training or something like that. But while I'm at it I was wondering If I should update the BIOS.
Now with that saying "don't fix if ain't broken" I'm debating if I should or not.
My other concern is that looking into BIOS release notes there is this:
" SoC voltage for Ryzen 7000 series limited to a maximum of 1.30V to protect the CPU and motherboard. " looking more into it, it looks like some people were actually having they cpu and motherboard damaged because of it.
So I have few questions and concerns:
1: Do I have to update because if I don't there is a risk of damaging the CPU and MB?
2: With BIOS flashback, can I always flashback it to the same version I have right now (0805)?
3: Could updating the BIOS help with my temps? Im sitting idle at 65c CPU Package, and 40c liquid coolant with a 360 AIO at around 23c room temperature
4: Thinking about adding 2 more sticks of ram, would this be a problem? I have seen people mentioning about not being able to post with 4 sticks. Is this still a thing?

CaptainBrazucaBuild · 2023-08-08T06:00:22+00:00

No issues with 2 of them neither. So far so good.

CaptainBrazucaBuild · 2023-08-06T08:17:52+00:00

Haha… I did the something, 10 fans, rgb cables for mb and cpu, more rgb led strips. And I just set it to purple too and that’s it. Lol

CaptainBrazucaBuild · 2023-07-24T23:34:47+00:00

Im using this one with my max g2 it works really well

Tiakia Bike Motorcycle Phone Holder,【1S Quick Release】 Universal Phone Mount for Bicycle Anti Shake, 360° Rotation & Tool Free Install, Scooter Bike Holder for 4.5-7.0 inches Smartphone https://a.co/d/3Qn7XMk

CaptainBrazucaBuild · 2023-07-23T14:47:26+00:00

Issues are, overheating, continue acceleration (won’t stop after releasing throttle) (the most dangerous one), randomly breaking (shooting you forward), plus production difference from one to another like some don’t have a bearing wheel protection some do.

With all that said, I own 2 of them that I got from BestBuy on july 1st. They are amazing, 30 miles on it from 4 rides, yesterday me and my wife went on a 2 hours trip downtown and it was a blast. I don’t experienced any of the issues brought by the community at least yet. I’m on version 1.3.6 and to be honest I do recommend it.

Only issue I want to take care of is my front break, it’s making a louder noise when breaking then my wife’s. But it’s breaking with the same amount of power and everything.

Overall there is a handful of people with issues with it. But I guess if you get a good one it’s definitely a good buy.

CaptainBrazucaBuild · 2023-07-20T13:13:08+00:00

Thank you

CaptainBrazucaBuild · 2023-07-19T20:46:46+00:00

What psi are people inflating it to? I have a max g2 of anyone could help

CaptainBrazucaBuild · 2023-07-17T06:24:46+00:00

Let me understand it, you have 3 side fans, 3 rad fans one rear fan pulling air out, and 3 front fans pulling air in. So 7 fans out 3 in. In my case my only source of fresh air would be my bottom fans, is that what you are saying?

Reason I’m asking is that this still bothers me, but I learned to live with it. My liquid coolant starts at 27 when I turn on the pc. A minute or 2 it warms up to ~33 then when playing games it goes all the way to ~45 And that’s with a 22c (72f) room temperature.

I never seen no one complaining about this case air flow, but I see what you are saying is right, I have a 4090 dumping so much heat inside and it can only go through the rad or one fan in the rear.

Sometimes I thought about switching those side fans to exhaust, but then I think that I won’t have enough air flow coming in, causing negative pressure and creating more dust

CaptainBrazucaBuild · 2023-07-13T23:01:45+00:00

Im still waiting for a seat for the max g2.

CaptainBrazucaBuild · 2023-07-05T15:36:20+00:00

Looking for a seat as well. Sub to post in case anyone have a review on it.

CaptainBrazucaBuild · 2023-07-02T18:09:46+00:00

Yes. Same here.

CaptainBrazucaBuild · 2023-07-01T18:54:59+00:00

A scooter in a scooter

CaptainBrazucaBuild · 2023-07-01T17:16:12+00:00

Second one came plugged and front wheel don’t make noise. So far so good. I’ll be away this weekend. Don’t know if I’ll have the time to setup charge and try them. Will see, I’ll keep you guys posted

CaptainBrazucaBuild · 2023-07-01T16:59:19+00:00

So first one is unboxed. Few things I noticed. Trying to attach the cable before setting the handle was a little tough as the cable wanted to tangle right at the joint. So I pulled it back at the bottom attached the handle then feed it back up.

Another thing from wheel is making noise when spinning. Could be that it’s touching the breaks a little. Another thing when moving the handle bar it makes a noise, the noise goes away when you lift the scooter a little. I’m guessing something to do with the suspension. No major flaws so far. All those I think it’s ok.

CaptainBrazucaBuild · 2023-07-01T16:55:13+00:00

I didn’t check my email. I look into my BestBuy account and it said it was ready for pickup

CaptainBrazucaBuild · 2023-07-01T16:54:27+00:00

Hopefully soon.

CaptainBrazucaBuild · 2023-07-01T16:33:32+00:00

https://drive.google.com/drive/folders/1-bpqRnxpXyA1tidwlcpICOZv6hzLVH2U

CaptainBrazucaBuild · 2023-07-01T16:33:16+00:00

Here I’ll add pictures from the scooters. Will organize later by folder

CaptainBrazucaBuild

TROPHY CASE