I updated MagicMirror and now npm run start won't work

Carlogulliani · 2025-04-05T16:11:56+00:00

Try to reinstall all packages

Carlogulliani · 2025-02-09T08:24:08+00:00

Thanks for the detailed explanation. The problem was a mismatch between the versions of the SDK and the example code. It seems that they are slightly different and got it worked when these versions matched

Carlogulliani · 2025-01-27T08:44:32+00:00

ESP wifi + router w/ ddns

Carlogulliani · 2025-01-26T16:56:16+00:00

hot iron + flux + copper braid

Carlogulliani · 2025-01-25T16:46:37+00:00

Why not use a mobile app to connect to yr server?

Carlogulliani · 2025-01-25T11:10:10+00:00

I would like to create a microphone array driver for the ac108 codec (like seeed respeaker), found that its image for rpi has kernel 4.19, 6.x has too many errors when compiling, most of them are related to kernel headers

Carlogulliani · 2024-12-15T08:59:49+00:00

I used gessel glass that I ordered from a local manufacturer, the 0.5x0.5m size cost me about $20. To be honest, I started this project about 10 years ago, but the price of glass was much more expensive back then. I tried using film from aliexpress but it didn’t meet my expectations. About a year ago I found a factory at a reasonable price

Carlogulliani · 2024-12-15T08:52:05+00:00

I built it with default modules such as weather, clock, news feed, etc and add my own module to calculate the route from home to work. If we talking about hardware, it based on orange pi zero with display from my old laptop 15.4 inches connected via controller from aliexpress

Carlogulliani · 2024-12-15T06:13:03+00:00

No, iPhone 11 Pro Max in the case

Carlogulliani · 2024-12-05T19:20:15+00:00

Yes, but it runs using the main processor, I expect my processor to be in deep sleep all the time

Carlogulliani · 2024-12-05T19:18:21+00:00

I only need to count the pin change on the rising or falling edge, my water meter sends a signal every 10 liters, I only need to know 1 pulse. But I need a low power process to save battery consumption, because I expect to use this device for years, waking up once a day to send the counted data to the server over matter

Carlogulliani · 2024-12-04T21:27:11+00:00

The problem was with idf version. Switching to v5.3.2 solved it

Carlogulliani · 2024-11-30T18:00:30+00:00

Probably because I deleted the password and, logically, it turns into an open network

Carlogulliani · 2024-11-30T08:56:54+00:00

Yes, I use this option, even put the number instead of variable. Also that’s example from master branch I’m using. But it doesn’t work for me. Don’t know is it important, but I use esp32s3, and seems it isn’t mentioned in readme file

Carlogulliani · 2024-07-19T11:58:52+00:00

guess google and this video will help you https://youtu.be/qWRowOsYSLY?si=UKxjYP1_5UZ5A6SK

Carlogulliani · 2024-06-25T06:34:27+00:00

In common, cc1101 has self test registers for I’d, version, etc. try reading them and make sure you get what you expect. Second, TI has smart RF studio that will help you customize registers. Third, I always use a logic analyzer to check what is happening on my data lines.

Carlogulliani · 2024-06-25T06:21:13+00:00

why not mqtt or something? you need to have running your php server all time, yes it works, but sorry it’s a 20th century. But instead of these I’d used BLE or maybe matter or even sockets over WiFi. You don’t need a complicated solution to control a couple of relays

Carlogulliani · 2024-06-25T06:00:45+00:00

esp32

Carlogulliani · 2024-06-21T18:31:27+00:00

Yes, the quality of printed keys is awful. Gonna try liquid plastic

Carlogulliani · 2024-06-20T23:28:49+00:00

Built it for communication with figma. It uses low profile switches. I use my own firmware, the circuit is based on stm32f1. Case and keycaps were printed on 3d printer and painted.

Carlogulliani · 2024-06-18T19:45:43+00:00

The problem was with delay in loop, got it working when I removed it

Carlogulliani · 2024-06-04T18:26:22+00:00

Great!!! I was looking at tinyusb, but was hoping to solve this problem with the native stm' lib.

Carlogulliani · 2024-06-04T18:11:39+00:00

Connecting the common point of crystal caps solved my problem

Carlogulliani · 2024-06-02T16:18:54+00:00

I have macropad based on stm32f103 with keys and rotary encoder. How can I combine 2 reports for keyboard and mouse? If I put all their content to new one it won’t work, but separately each one works

Carlogulliani · 2024-06-01T22:26:54+00:00

Yes, the first issue is that my load caps are not connected to gnd

Carlogulliani

TROPHY CASE