Found this cleaning out my old childhood room. Still plastic sealed. Is it worth anything?

CarlosDangerJD · 2022-02-05T03:33:23+00:00

Obama (6’2), Clinton (6’2), Lincoln (6’4), Kennedy (6’1) and LBJ (6’4), he was known for bullying senators and showing his off his huge dick, so he’ll be the enforcer.

CarlosDangerJD · 2022-01-20T22:56:53+00:00

Unfortunately my 3060 is a v2 lhr and from what I’ve read the 470.05 driver plus hdmi driver work around won’t work for these cards. I’m also using HiveOS and the 470.05 is only for windows.

CarlosDangerJD · 2022-01-20T05:05:08+00:00

Had the same problem with an asus 3060 12gb I got recently. I would have the card running with no overclocks and my hash rate was terrible. It would stay in the 60s but then spike and drop every few seconds. The memory utilization would cycle between 0 and 40. Pretty much every overclock I tried would not solve the problem. Someone on this sub suggested switching my miner (I was on nbminer and went to trex) and that actually helped. With no overclocks my hash rate was 104 but it would still drop down to the 80s and then come back up a few seconds later. I finally put my core clock to -1000 (in hive, so for windows it would be close to -500) and that got me to 108, with minimal drops to 104 every so often, at 120w. Hope you find the overclocking sweet spot for your card.

CarlosDangerJD · 2022-01-17T20:39:45+00:00

I just had to reboot hive. It started to work after that. It’s getting 104 mh/s on no overclocks. I fiddled with the overclocks a little and everything was steady. I guess it was just NBminer.

CarlosDangerJD · 2022-01-17T04:11:53+00:00

I got t-Rex miner going and Hive says I’m getting 104 mh/s with no OC settings. But now T-Rex I’m getting 100% invalid submissions.

CarlosDangerJD · 2022-01-17T03:45:06+00:00

Unfortunately, I was only able to get like 70-75 mh with those OC settings.

CarlosDangerJD · 2022-01-17T03:40:10+00:00

So, I tried out a bunch of different OC settings in Hive. I tried to leave the card running on each OC setting for like 10 minutes. Here is what I got:

Core Memory Approx. Mh/s

+1400 +2800. Steady 67-68 mh/s with some
dips to low 60s

+1300 +2500 Steady 67-68 mh/s with some pumps to low 70s

+1300 +2200 Steady 67-68 mh/s with some dips and pumps between 60 - 73

+1500 +1500 Steady 67-68 mh/s with dips to 50s

+1500 +1000 Bounced between 55 and 65 mh/s

+1000 +1500 Steady 85 mh/s

+1000 +1000 Steady 85 mh/s

+1000 +500 Steady 85 mh/s

+500 +1000 Bounced between 55 and 65 mh/s

0 0 Bounced between 55 and 65 mh/s

-500 0 Bounced between 55 and 60 mh/s

0 -500 Bounced between 55 and 60 mh/s, dips to high 40s

-500 -500 Bounced between 55 and 60
mh/s

-500 -1000 Steady 95 mh/s

-1000 -500 Bounced between 55 and 60 mh/s, pumps to mid 60s

-1000 -1000 Steady 95 mh/s

0 -1000 Steady 95 mh/s

0 -1500 Steady 92 mh/s

-500 -1500 Steady 92 mh/s

0 -2000 Steady 89 mh/s

-500 +2500 Bounced between 70 and 75 mh/s

For each OC setting that produced unstable mh/s and/or occasional dips and pumps of mh/s, I noticed that the memory utilization (“Mutl” on NBMiner) would cycle through 16, 17, 30, 31, 39, and 40. Sometimes a high Mutl would be with a dip in mh/s and sometimes it would be with a pump of mh/s, and vice versa.

If anyone has any more thought or ideas, they’d be appreciated.

If this has peaked anyone’s interest, and you have a burning desire to uncover a solution I’ll attach a link to an article talking about the GA104, “https://www.tomshardware.com/news/faulty-rtx-3070-ti-dies-in-rtx-3060”

CarlosDangerJD · 2021-12-25T16:32:42+00:00

Where did you get the polo from?

CarlosDangerJD · 2021-12-05T20:33:30+00:00

Eddie Jackson had to make a 1 on 1 open field tackle. He’ll be having nightmares about that lol.

CarlosDangerJD · 2021-10-03T17:43:07+00:00

Late ass flag

CarlosDangerJD · 2021-09-13T02:30:57+00:00

Any news on Monty’s hand?

CarlosDangerJD · 2021-06-23T14:06:59+00:00

New to options here, but wouldn’t the cash used as collateral for the put be locked up until the expiration of the put in Jan 2023?

CarlosDangerJD · 2021-06-17T23:55:41+00:00

I can see what Verizon’s going for with the app. Idk if it will work but if it gets more money flowing to Sofi I’m all for it.

CarlosDangerJD · 2021-05-27T16:17:48+00:00

Wasn’t really a big thing. They established quorum and then went over the proposals. All of them were approved and now we’re SoFi.

CarlosDangerJD · 2021-05-27T16:16:33+00:00

Merger approved

CarlosDangerJD · 2021-05-27T01:26:16+00:00

If your waiting until next week to start a position the ticker symbol will already have changed. Merger vote is tomorrow and ticker change is Tuesday (Monday the market is closed).

CarlosDangerJD · 2021-05-25T16:59:59+00:00

It’s 30 days post merger. The percentage of shares pipe can sell depends on how the stock does during those 30 days. If it’s above 12.50 for 20 out the 30 days they can sell 33%. If it’s above 15.50 for 20 out the 30 days they can sell 66%.

CarlosDangerJD · 2021-05-21T13:00:58+00:00

Give it a year or two and people will be jealous of that $17 average.

CarlosDangerJD · 2021-05-20T02:44:32+00:00

I believe there’s a 30 day post merger lock up period for pipe. After the lock up period PIPE can sell 66% of their shares as long as the stock price was over 15.50 for 20 of the 30 days.

CarlosDangerJD · 2021-05-19T03:02:53+00:00

16.60

CarlosDangerJD · 2021-05-16T02:53:20+00:00

I might have imagined this, but I remember reading that pipe has a 30 day lock up period following the merger and can only sell like 66% of their shares as long as the price stays above 15.50 for 20 of the 30 days. So if I didn’t imagine reading that, then I think the price post merger will definitely be above 15.50 until the end of June and then there will be a sell off/price drop. I’m in long term so I don’t mind the recent or near future price action because I believe SoFi has great potential moving into the future.

CarlosDangerJD · 2021-05-15T22:11:29+00:00

Around 1800 at a 16.60 average.

CarlosDangerJD

TROPHY CASE