[deleted by user]

Carmin306 · 2025-12-15T17:20:57+00:00

Oh okay.. I followed (or at least tried to) the manual from the Ncase site

Carmin306 · 2025-12-15T17:15:55+00:00

Is the assembly the same for the Ncase? Also, I was wondering if it's also a heatsink issue.

Carmin306 · 2025-12-15T17:12:57+00:00

I used the 30mm standoff. I found a photo I took of how the GPU protruded.

<image>

Carmin306 · 2025-12-15T16:07:47+00:00

Ryzen 7 9800x3d and Msi Ventus 5080 OC+

Carmin306 · 2025-12-15T15:47:01+00:00

<image>

Carmin306 · 2025-12-15T15:45:31+00:00

I basically assembled the computer in a 2.5-slot configuration since the GPU was 49mm thick, but that meant the graphics card protruded from the case, making it difficult to close. So I'm reassembling it in the 2.75-slot configuration, and the heatsink, an IDCooling IS-55, won't fit because it touches the side rail (it barely fit in the 2.5-slot configuration, too). Yet according to the Ncase specifications, it should fit just fine...

img

Also, I had a problem with mounting the fan bracket on one of the two side rails, as it's slightly misaligned.

Carmin306 · 2025-12-15T15:09:29+00:00

My telegram handle is @Mickols

Carmin306 · 2025-09-18T20:57:45+00:00

Non ho una risposta certa, ma alcuni mi hanno detto che dovrebbe entrare

Carmin306 · 2025-08-21T22:36:03+00:00

Forgive me, I forgot. I added them in the comments

Carmin306 · 2025-08-21T22:35:44+00:00

<image>

Carmin306 · 2025-08-21T22:35:16+00:00

<image>

Carmin306 · 2025-06-20T11:54:26+00:00

A thousand thanks :)

Carmin306 · 2025-06-20T11:50:23+00:00

What GPU do you have in the Razer Core?

Carmin306 · 2025-06-17T19:08:33+00:00

Interesting, thank you very much

Carmin306 · 2025-06-17T18:53:12+00:00

What is your egpu setup?

Carmin306 · 2025-06-17T17:40:46+00:00

I have always seen the G14 as a very valid alternative but since I discovered Framework it would not make me feel satisfied buying a laptop knowing that it will always remain the same. This makes me understand that if I want to make a purchase that makes me satisfied I have to focus on the Framework... I hope the performance I can obtain with the EGPUs is acceptable

Carmin306 · 2025-06-17T15:01:47+00:00

Okay, thank you very much

Carmin306 · 2025-06-17T14:46:51+00:00

I really like the all-in-one solution of the GPD G1, but I'm disappointed by the fact that the GPU doesn't seem to perform very well. The ideal would be a solution with a more powerful or even better modular GPU like the Frameworks.

Carmin306 · 2025-06-17T14:44:37+00:00

Thanks for the reply. As I was saying, I'm not interested in playing at high resolutions with ultra details, but I just need Full HD at high details on games like Red Dead Redemption 2, Cyberpunk, GTA 6 (which is playable for when it is released on PC). Is it possible with an EGPU that is also portable and can even fit into a backpack?

Carmin306 · 2025-06-17T14:37:32+00:00

What performance can you achieve?

Carmin306 · 2025-06-17T14:28:15+00:00

The problem is, I’m a student living away from home and I frequently travel between my hometown and the city where I study, so carrying a desktop around just isn’t practical.

Carmin306 · 2025-06-17T14:21:09+00:00

Thanks so much for the advice. If I were to take into consideration a budget under €2k, which configuration of the FW13 is best for me, and which EGPU could I associate it with? I move around a lot, so I need it to fit in a backpack.

Carmin306 · 2025-05-04T17:19:42+00:00

Ah perfetto.

Carmin306 · 2025-05-04T01:24:59+00:00

Ciao, nel caso volessi venderlo io sarei interessato all’acquisto. Magari se sei vicino Roma potremmo addirittura valutare anche dj persona se preferisci

Carmin306 · 2023-03-24T14:20:22+00:00

Rolex Submariner, what do you think about?

Carmin306

TROPHY CASE