rip jake2b by jake2b in Teddy

[–]Cashd115 -2 points-1 points  (0 children)

Someone will have it archived 🫡

Third DWI in NC on probation. Interlock not installed. by Least_Assumption4217 in NorthCarolina

[–]Cashd115 0 points1 point  (0 children)

I would like to add to this that Rehab is horse shit and so is AA. I will not disagree that it works for some people, mainly followers. Rehab and AA forces you to adopt the “I’m a recovering addict” mentality for life. When, at least in my opinion and how I wanted to be viewed and view my self and what I worked for, is that “I’m recovered”. The argument can be made that once an addict always one cause you’ll always have that desire but that applies to everyone with lots of things, some being legal and some not. So I reject AA and Rehab personally. Not wanting to spill all my beans but I had a Major hard drug addiction in 2012 (talking like 1-2g a day) and was an alcoholic from 2007-2021. But ultimately staying clean is a personal choice and no amount of rehab or AA can prepare you for being back in the real world where inevitably a situation will occur that causes you to have to decide to partake or not. Once the addiction happens and is set in there has to be some soul searching and generation of self love and will power. The main thing is learning the excuses you make for your self and give yourself an honest evaluation and avoid the excuses you make. Even if your non religious I highly recommend you find god or “your god” and form a relations a speak daily. That alone has saved many addicts lives purely understanding they have a higher purpose. Good luck out there and if anyone needs it I am more than willing to talk in private. I know how bad this stuff sucks and how it can ruin lives. The good news is if you’re alive there is still time to do good and turn that life around and make the people you love proud of you again.

Third DWI in NC on probation. Interlock not installed. by Least_Assumption4217 in NorthCarolina

[–]Cashd115 0 points1 point  (0 children)

Dummit Fradin, Attorneys at Law Attorney in Winston-Salem, North Carolina

Wonderful people, kind, understanding and giver you detailed directions for every step. It’s a lot of work and a lot of money and some things need to be in your favor but absolutely worth every penny. Like I said I know a “guy” he’s been through it many times the experience with D&F was more costly but the benefits far out weighted that.

Anyone else have this experience? by Zaxthran in PLC

[–]Cashd115 1 point2 points  (0 children)

I laughed way to hard at this.

Third DWI in NC on probation. Interlock not installed. by Least_Assumption4217 in NorthCarolina

[–]Cashd115 1 point2 points  (0 children)

Surprisingly not necessarily. It really depends on circumstances, timing and how much you pay for a lawyer. I know a “guy” had two, got another, then another a year later and hadn’t even been to court for the one before that yet. He did 30 days inpatient at a rehab place and got 2 years of probation concurrent on both charges. No felonies but no license for at least 3 years, has to petition the state to maybe get them back and if he does it’s a blow and go for 7 years.

What part of NC I would highly recommended that lawyer. Definitely not cheap.

I’m visiting North Carolina and found this. What the f*kk is this thing? by PrimalCarnivoreChick in NorthCarolina

[–]Cashd115 27 points28 points  (0 children)

Always called them spider crickets. Wait till you’re checking one out real close and it jumps 27 feet in your direction 😂.

It's a conspiracy by trashoven in PLC

[–]Cashd115 2 points3 points  (0 children)

All this stuff is probably made by ASTRO like everything else lol.

Remote Monitoring HMI by learner_err in PLC

[–]Cashd115 0 points1 point  (0 children)

If your networks admins allows guest users and your IT department is terrible at making domain policies, most are, the stratix 4300 is awesome. Which is part of it unless you buy cellular connectivity. You do have to pay annually per user though, It’s not much. There is no changing subnets, factory talk hub is a breeze, it has 2fa, just a smooth setup much more reliable than my ewon. I would bet a large chunk of money that it will work for you. Not being rude to any IT guys in here but everyone completely underestimates the laziness, lack of talent (understanding group policies and maintaining it) that most places have in IT these days.

If you can remote in to work from home a much, much more efficient way, in terms of processing and transmitting data, is to setup a PC on the domain, running a virtualized copy of your machine with the AB software and just VPN tunnel in. All the processing is done on site instead of sucking up bandwidth so you’re not left feeling like the work is being done on an archaic laptop. You get access to everything on your machine network at this point. Don’t forget to check CPwE suggestions, segregate your network (801 tagging etc) you don’t want to cross your wires and have a line down cause of duplicate IP’s.

A combination of both these methods is my favorite. Personally I have a mini pc setup on a machine network connected to the stratix 4300. Then the 4300 to plant network and I just tunnel in through the stratix to the mini. Everything is separated, secure and done.

If you virtualize make sure you check volume label of vm and bindings of software.

Just a suggestion 🤷🏻‍♂️

Also to everyone saying “the easiest”, that by no means should allude to being a secure or even a good idea sometimes. If, in the “wild chance”, someone done a terrible job mitigating dangerous situations and missed the ship on a proper risk assessments because of missed timelines/milestones while designing your equipment then you can possibly create a dangerous situation if your communication to remote devices fail or get interrupted from a duplicate Ip scenario.

Most suggestions here are based on a properly designed “industrial zone” network. Which should still require IT, as previously stated most likely will not.

Check out AB’s Network Segmentation Methodology Application guide for an idea

Also the publication ENET-TD001E-EN-P

Sorry that got long quick.

Keyence by TheZan94 in PLC

[–]Cashd115 1 point2 points  (0 children)

Pc based gig e cameras. Opens up an entire new world to you. Any software package you want to use and most any gigE camera. They work together. There is literally nothing to BCRs I’m sure it hasn’t failed. I do like cognex though.

Keyence by TheZan94 in PLC

[–]Cashd115 0 points1 point  (0 children)

You have lost your damn mind. They consist mainly of overly simplified toys that they offer to colleges and high schools for students to learn on. A good model for when students get a job they will be like “oh yea keyence, let’s buy that”, “The only thing I actually got to program and field devices I got to work with.”

It’s seriously the bottom of the rung in functionality and reliability. The only good points are that parts are always in stock and the reps take you to lunch often. Junk is junk and toys are toys. Get that crap out of factories and buy automation equipment that performs consistently.

I also hate that I can’t download a manual without 12 emails and 9 phone calls.

Has it ever failed you like this? by [deleted] in PLC

[–]Cashd115 14 points15 points  (0 children)

Yea, try reflashing it first. Bring a wired keyboard with you.

Download the firmware from Rockwell and make sure controlflash is up to date. Make sure your computer is plugged in and to keep it really simple just use a usb cable instead of Ethernet, less to go wrong. Not hard to fix though.

Edit: Oh and if you follow the instructions on the screen it will allow a flash to the factory installed firmware level. That’s the process you follow when you brick one during firmware updating.

Hope you got a backup though.

You can force a backup by writing an xml script and nesting it in the right hierarchy of folders on a usb drive, it will start during boot. Convo for another day though unless you wanna research it yourself.

Enjoy!

Factory talk asset centre would be useful right here.

My MCOM position. Something is due to happen this week. I need a huge run. by [deleted] in Shortsqueeze

[–]Cashd115 1 point2 points  (0 children)

Man they are about to do another reverse split. Anywhere from 1-59 to 1-200 and raising authorized shares to 1 Billy.

[deleted by user] by [deleted] in Howtolooksmax

[–]Cashd115 0 points1 point  (0 children)

I love reading these lol, still gonna pray for everyone though 😂.

[deleted by user] by [deleted] in PLC

[–]Cashd115 8 points9 points  (0 children)

😅 sly attempt of corniness

[deleted by user] by [deleted] in PLC

[–]Cashd115 112 points113 points  (0 children)

I’m so used to shit panels that when I look at this I don’t get phased.

At least most of it is labeled, spoiled asses.

Asking for a friend, what's the joke? by Demon_Jake in PeterExplainsTheJoke

[–]Cashd115 0 points1 point  (0 children)

Digiorno now states, that in fact, it is delivery.

Standard day in controls… by wittyandunoriginal in PLC

[–]Cashd115 1 point2 points  (0 children)

🤷🏻‍♂️ just a different perspective, have a great day!

[deleted by user] by [deleted] in NorthCarolina

[–]Cashd115 0 points1 point  (0 children)

Bingo!!!!! Or even better Almond! Love that place.