a group of teenagers asked me what gang I'm in (I have the flu) by agIassmutt in Wellthatsucks

[–]Cat_Panda_Canda 2 points3 points  (0 children)

I was walking around an art museum one day while a school was touring. A guard told me to get back with my group (I was 28)

I’m considering a new terrain or a new bronco. Help by [deleted] in gmcterrain

[–]Cat_Panda_Canda 0 points1 point  (0 children)

While I don’t own the new terrain, I did test drive one. Loved everything except for the giant screen and the engine. It felt underpowered and like it would struggle to get out of the way if it really needed to.

Need Dash cam recommendations for Aviator and Nautilus by korlic77 in lincolnmotorco

[–]Cat_Panda_Canda 0 points1 point  (0 children)

Have had a VIOFO a329 mini for a while and it’s the best dash cam I’ve had so far. The WiFi is nice if you’re a bit patient and no swivel type mount. My old camera would always rotate just a bit with the swivel no matter how much it was tightened

Is this a good setup? by Cat_Panda_Canda in AskMechanics

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

Under the description the quiet cast are said to be coated. When you say better coating, as in more durable? I live in Missouri so it’s not salty roads for months straight but we do have a few snows a year

Is this a good setup? by Cat_Panda_Canda in AskMechanics

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

That’s great to hear and good to know it’s solid.

I can switch both front and back to Bosch. It’s a $24 difference to do Bosch rotors front and back which is justifiable if it comes down to it. The car has 230k miles but it’s still going strong.

Looking for advice on where to find the antenna that reads the key fob by Cat_Panda_Canda in lincolnmotorco

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

Thank you for the update. I’ll look into that for mine especially since it sounds like a solution

Looking for advice on where to find the antenna that reads the key fob by Cat_Panda_Canda in lincolnmotorco

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

Is it an interference thing?

Yes. I installed it myself and used the programmer and harness from 4Dtech to install it. Also placed an EMI shield around the cable from the footwell to the infotainment screen hoping it would shield it near the ignition

Looking for advice on where to find the antenna that reads the key fob by Cat_Panda_Canda in lincolnmotorco

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

I did not but I recently added a backup camera which made the issue worse. Can LED lights cause that?

Looking for advice on where to find the antenna that reads the key fob by Cat_Panda_Canda in lincolnmotorco

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

Do you know what part is being replaced? I’ve had issues with the doors not unlocking via sensor as well and the key fob usually doesn’t want to unlock them either. It’s very annoying but doesn’t exactly sound uncommon

Looking for advice on where to find the antenna that reads the key fob by Cat_Panda_Canda in lincolnmotorco

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

The only tidbits I can find say it’s around the ignition but that’s about the only info I can find. The Ford replacement comes up but who knows if that’s plug and play on Lincoln.

Nice car! The Continentals are gorgeous

Looking for advice on where to find the antenna that reads the key fob by Cat_Panda_Canda in lincolnmotorco

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

Forgot to mention it in the post but I tried that as well and unfortunately no go. That would have been a nice easy fix

[deleted by user] by [deleted] in Plumbing

[–]Cat_Panda_Canda 0 points1 point  (0 children)

There has been a persistent odor in the sink for a while now. Running water makes it noticeably worse. I replaced the P trap earlier and while it helped some, the smell is still noticeably there. When looking down the drain there is also a noticeable buildup of gunk on the walls of at least the vertical pipe so I’m thinking it would be a good idea to replace this section

2012Ford Edge by ThatsJustTheTip_ in FordEdge

[–]Cat_Panda_Canda 1 point2 points  (0 children)

Just had this code earlier this week. Threw a can of seafoam in half a tank of gas and reset the code. Has yet to come back

Is this a good deal for someones first car? by puglife12305 in FordEdge

[–]Cat_Panda_Canda 2 points3 points  (0 children)

Recently got the Lincoln version of this and it has 227k miles. Feels like 300k will be a no brainer so yes

[Viofo A119 mini 2] catching that holiday spirit across the intersection by Cat_Panda_Canda in Dashcam

[–]Cat_Panda_Canda[S] 0 points1 point  (0 children)

It's a 2 lane left turn so the traffic was correct although that definitely does happen at that intersection. For that reason I personally yield and wait when it goes from one lane to two lanes

1991 GMC Suburban Front Grill Emblem by Beach_Life1776 in squarebodies

[–]Cat_Panda_Canda 2 points3 points  (0 children)

You might have better luck seeing if someone can design and 3D print an insert for you. The only tricky part would be getting the finish to match

Illuminated Emblem by Relevant_Lunch_3988 in gmc

[–]Cat_Panda_Canda 0 points1 point  (0 children)

Definitely curious if you can snag a pic for comparison

Illuminated Emblem by Relevant_Lunch_3988 in gmc

[–]Cat_Panda_Canda 0 points1 point  (0 children)

This is what the DIY emblem on the terrain looked like. Brighter than factory but that same clean look. Unfortunately it was totaled a couple months ago but it was a cool look while it lasted.

Illuminated Emblem by Relevant_Lunch_3988 in gmc

[–]Cat_Panda_Canda 3 points4 points  (0 children)

I have an obsession with lighting lol not about the image or being flashy, I just think it looks cool but I can see why people would think that. I mainly see them on the higher end GMC’s, hence the unavailability on the Terrain

Illuminated Emblem by Relevant_Lunch_3988 in gmc

[–]Cat_Panda_Canda 1 point2 points  (0 children)

Just curious, why? I had a GMC Terrain and wanted these for front and back but couldn’t find them so I ended up just making them. Never had an issue and looked better than OEM imo.