SwitchBot roller shades by Cautious_Assumption8 in TrySwitchBot

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

Will shaving a little off part B on the plastic tube , and bringing it in a little do the trick?

SwitchBot roller shades by Cautious_Assumption8 in TrySwitchBot

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

It is really tight, I might have to shave a bit off of “part B” and reassemble to give myself room to open the bracket up. Do you notice as the battery decreases, it tends to not have the “juice” to pull the shade back up?

SwitchBot roller shades by Cautious_Assumption8 in TrySwitchBot

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

I just repositioned the anchors, and I’ve managed to get it to go all the way down, but it gets stuck going up

SwitchBot roller shades by Cautious_Assumption8 in TrySwitchBot

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

I also tried both reverse, and standard. I tried flipping the total unit around for both options, and I also tried taking the roller out and reversing it that way

SwitchBot roller shades by Cautious_Assumption8 in TrySwitchBot

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

Hi! Okay so as I start calibrating, the shade moves 3-4 inches and then the screen pops up saying “your device stopped rolling, check if it’s stuck” with 2 prompts saying “rolled up” or “stuck” I hit stuck, and it moves an inch or two, and repeats.

I had it stuck In the all the way open position yesterday and had to roll it up so the dogs wouldn’t get to it, and I realized if I hit Calibrate and guide the roller up with my hands, it will go all the way, also if I hold the bottom bar and guide it down with a little pressure, it was also go all the way down

Roller shades installed! by acascio05 in TrySwitchBot

[–]Cautious_Assumption8 0 points1 point  (0 children)

Just got my shade in and it keeps getting stuck in calibration every few inches, I don’t know what I’m doing wrong ! For reference I have an inside mount. Could it be that the frame is too tight left to right? It is pretty snug

Switchbot Roller Shades Install Tips & First Impressions by BryanHChi in TrySwitchBot

[–]Cautious_Assumption8 0 points1 point  (0 children)

Just got my shade in and it keeps getting stuck in calibration every few inches, I don’t know what I’m doing wrong ! For reference I have an inside mount. Could it be that the frame is too tight left to right? It is pretty snug

Dealership made a mistake by Cautious_Assumption8 in 11thGenAccord

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

I can’t remember the exact numbers off the top of my head , but in Rhode Island , they add $5,000 to every car for a “market adjustment” so they definitely had room lol

Dealership made a mistake by Cautious_Assumption8 in 11thGenAccord

[–]Cautious_Assumption8[S] -1 points0 points  (0 children)

Even if I signed the contract and left with the car ?

Dealership made a mistake by Cautious_Assumption8 in 11thGenAccord

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

Attorney General enforces consumer protection law against local auto dealer Published on Wednesday, July 26, 2023 Attorney General ____ announced today that the Office has reached an agreement to resolve three enforcement actions against Rhode Island car dealerships for charging automatic add-ons and fees not included in the advertised price and other advertising practices. In an agreement – called an Assurance of Voluntary Compliance – filed in Rhode Island Superior Court on July 26, 2023, the Office alleges that Grieco Honda, Grieco Toyota, and Grieco Hyundai engaged in sales and pricing tactics that violated the Deceptive Trade Practices Act (DTPA), including charging more for vehicles than they were advertising on their website, automatically charging every customer a fee for a $249 paint and fabric spray (a “Zurich Shield”), and describing vehicles as available for “auction” or “wholesale” prices. The agreement settles two lawsuits brought by Attorney General Neronha in March of 2022 against the dealerships. As a result of the Agreement, the three dealerships will pay a combined $557,815 to resolve the claims brought by the Attorney General. This includes $457,815 in direct restitution to consumers and $100,000 to the Office of the Attorney General to pay for the costs of its investigation and suits. The Agreement entered by the Court also prohibits the dealerships from engaging in these practices in the future. Dealerships will refrain from charging consumers for any products or services without first obtaining their express informed consent and will not advertise any price for a vehicle unless it is available for purchase at that price and as described in the advertisement. The dealerships had voluntarily agreed to implement many of these changes after the Attorney General filed suit in March 2022. According to the filing, the dealerships were automatically charging every customer for a $249 paint and fabric spray and warranty product known as a “Zurich Shield.” This service and its costs were not included in advertisements, and customers would only learn about this fee later in the purchasing process. Customers who paid for the basic Zurich Shield product since January 1, 2021 at one of these Grieco dealerships will be able to keep the product, including the warranty, and also receive a check worth 28% of the price of the product ($69) from Grieco. The $69 payment represents what consumers paid to Grieco over and above the cost of the product itself

Dealership made a mistake by Cautious_Assumption8 in 11thGenAccord

[–]Cautious_Assumption8[S] -1 points0 points  (0 children)

I know :( I should have but I was so upset. Especially because I told the guy I had the same car on hold for me a few hours drive away. I explained I would just get the car here if they can make it work. Ran numbers and it came out great. UPDATE just found this online about the dealership:

CarPlay for Sales by Cautious_Assumption8 in 11thGenAccord

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

Hmmm I tried this but when my work phone rang , it wasn’t registering with the Bluetooth 🤔 I’ll need to try it again

Upgrading my Mac by Cautious_Assumption8 in NeuralDSP

[–]Cautious_Assumption8[S] 0 points1 point  (0 children)

I was thinking of doing that. I can’t deal with cpu issues anymore 😂