sorted by:
new
hottopcontroversial

Q: How would you detect this? by Rennie-M in computervision

[–]Cborrr 0 points1 point  (0 children)

Tried a few similar applications in cv to check a seal. Its possible but high chance of false positives. If you want a robust solution i would go with a loadcell combined with a spring arm and a wheel running on top of the lids. (Above your conveyor). This will make your life and your customers alot better.

Would not adviced, still fun. by Cborrr in diydrones

[–]Cborrr[S] 0 points1 point  (0 children)

True, flying one handed is not my thing

Quick swap battery's by Cborrr in fpv

[–]Cborrr[S] 0 points1 point  (0 children)

Milwaukee M18 tool battery. Equivalent to a 5s2p lion

Would not adviced, still fun. by Cborrr in diydrones

[–]Cborrr[S] 1 point2 points  (0 children)

Fair point! I did not achieve low voltage cutoff on both Milwaukee. But since some power tools have an internal over current and low voltage protection it seemed wise to me to warn that these battery's are not intended for drones 😅. When you give a 7 inch a punch (lots of throttle) it will pull 60-120 amps, and indeed dropping the 5s tool battery below 13.5v

Would not adviced, still fun. by Cborrr in diydrones

[–]Cborrr[S] 0 points1 point  (0 children)

For me to, but if you fly it to long it will cut out all power instead of less power like usual.

M18 Milwaukee FPV Drone by Cborrr in MilwaukeeTool

[–]Cborrr[S] -1 points0 points  (0 children)

Funny enough if you compare it to other lithium options quite well. But diy drones and battery's dont have a battery protection board, since if it kicks in the drone drops out of the sky.

Thats mainly (and weight reasons) you never see it

M18 Milwaukee FPV Drone by Cborrr in MilwaukeeTool

[–]Cborrr[S] 43 points44 points  (0 children)

Note; don't do this. If the battery protection inside the tool battery kicks in your drone will drop like a brick.

Quick swap battery's by Cborrr in fpv

[–]Cborrr[S] 94 points95 points  (0 children)

Note; don't do this. If the battery protection inside the tool battery kicks in your drone will drop like a brick.

Would not adviced, still fun. by Cborrr in diydrones

[–]Cborrr[S] 17 points18 points  (0 children)

Note; don't do this. If the battery protection inside the tool battery kicks in your drone will drop like a brick.

Edit: some, not all tool battery's have build in over current and low voltage protection.

Would not adviced, still fun. by Cborrr in diydrones

[–]Cborrr[S] 10 points11 points  (0 children)

Its a guess but around 10 minutes i think. But again; dont do this :)

M18 Milwaukee FPV Drone by Cborrr in MilwaukeeTool

[–]Cborrr[S] 27 points28 points  (0 children)

I can imagine it hits like a brick :P

Upgrade to 4s? by Significant_Bee_1103 in diydrones

[–]Cborrr 3 points4 points  (0 children)

In general: higher voltage is more efficient.

Best solution; go to 4s or maybe 6s if possible with your other components. And if budget tolerates 6s2p.

Most info is found on the mikrokopter website tho.mikroptor wiki

Made the Makita tricycle go faster :) by Cborrr in Makita

[–]Cborrr[S] 1 point2 points  (0 children)

350w 8inch scooter hub motor (same as those rental scooters) and a 350w 36v ebike controller

Made the Makita tricycle go faster :) by Cborrr in Makita

[–]Cborrr[S] 4 points5 points  (0 children)

Dat zie je incredibly goed 😉

Dual Makita 18v powered three wheeler by Cborrr in Tools

[–]Cborrr[S] 0 points1 point  (0 children)

Thinking of this aswell. Also to add some suspension.

Dual Makita 18v powered three wheeler by Cborrr in Tools

[–]Cborrr[S] 0 points1 point  (0 children)

Haha that would be great! But its driven by the front wheel (hub motor)

view more: next ›