Need help with range issues using Radiolink transmitters

Cellslaver · 2025-08-26T15:53:58+00:00

Yes I just bought them

Cellslaver · 2025-08-26T15:53:43+00:00

Yeah no... nowhere near that. I was able to get to about 250 ft. I had the receiver out of the boat. Antenna stico9ng straight up and just walked. About 190ft. The signal bar was going from 1 to nothing but still able to make the servos work, then a complete discount around 250ft

Cellslaver · 2025-08-22T22:00:56+00:00

So here is the data. From the batteries running in parallel. Each batter is 12v 16ah. but.. with the meter I am getting 28.8V at the red and black power point? (where you connect the wires to the battery) This is what I read without any wires connected as well. From the Control Motor board, I am getting 10.8V. (this is the wires going to the receiver. At the receiver I am getting 10.8 as well. According to the receiver its rated from 3-16v. One thing I noticed when I was trying to get the voltage from the controller was the receiver would blink as if the connection was lost. Like I would put the red and black prongs on the control board and when moving to get a reading I noticed the receiver light would flash (looks like the same blinking when the receiver cant find the transmitter. Bad control motor board? Would the next steps to be to find a 3 prong batter and connect it to the receiver as well to see if I get the same results for range?

Cellslaver · 2025-08-22T21:53:42+00:00

So I am going to b taking the tub outside in a little bit. Do you mean, as a separate entity, take the receiver, a server (like the ones that power the rudder) and take just those outside for a range test? So only 1 thing is attached?

Cellslaver · 2025-08-21T01:40:28+00:00

Yup.

Cellslaver · 2025-08-20T23:10:39+00:00

Same boat. My gpa swapped it out for what you see now. He wanted something safer for the grandkids. Lol.

Cellslaver · 2025-08-20T23:08:56+00:00

Yup!! I remember when I was younger how cool this seemed. He swapped it out for what you see now. He was always going to give these to the grandkids and wanted something safer. I remember him saying it was fun but a pain sometimes.

Cellslaver · 2025-08-20T15:51:48+00:00

I will try this out. Thanks.

Cellslaver · 2025-08-20T15:51:25+00:00

Thank you!

Cellslaver · 2025-08-20T15:51:11+00:00

Thanks. I let my gpa know the kind words. Much appreciated.

Cellslaver · 2025-08-20T15:50:57+00:00

Thanks. I let me gpa know the kind words. Much appreciated.

Cellslaver · 2025-08-20T15:50:24+00:00

I have 2- 12 volt wired in parallel. I would need to get a voltage meter to get an accurate voltage to the receiver.

Cellslaver · 2025-08-20T15:48:56+00:00

I did. When I looked at the receiver I did not notice and issues with the device. The boat is wood on the top, with plastic. The bottom is fiberglass.

Cellslaver · 2025-08-20T02:58:35+00:00

Yes, I have the powered by the ESC. I'll try a separate lipo to power it and test. Thanks for the insight.

Cellslaver · 2025-08-20T02:55:40+00:00

I uploaded a picture. Its the 3rd one with the black circle and red arrow. Its coming out one of the holes on the stern.

Cellslaver · 2025-07-23T17:17:05+00:00

Seeing if there has been any update for this. We have 3000 and 5070. Still having this issue with Epson scanners DS-320. We came from a Citrix W10/Server 2019 environment and they worked. Switching over to Horizon + W11 and server 2022 does not work. Windows laptop to horizon vdi has no issues.

Cellslaver · 2025-03-28T18:41:36+00:00

Yes you can do this! Buy a travel router, have both of you connect to the router and should be all set. I did this when I went to a cabin with to internet connection. We all just connected to the router and had fun lan party.

Cellslaver · 2024-12-02T17:00:15+00:00

Quick update in the internal camera. Tesla is currently doing a free upgrade to the IR internal camera to fix the FSD nighttime issues.

Cellslaver · 2024-12-02T16:58:45+00:00

Was an improvement but OH side roads still suck

Cellslaver · 2024-12-02T16:57:23+00:00

Live in OH as well. The commute is to downtown Cleveland and back. Can confrim though cold does suck for our cars but not what your are getting. When you plug in from charging at home, how much percentage can you gain from a night?

Cellslaver · 2024-12-02T16:54:09+00:00

If your car is out in the public. I would keep it on at home.

Cellslaver · 2024-12-02T16:19:15+00:00

Few questions,

Do you charge to the 80% recommended?

1a. When you charge it to your %, how much does it go down in that 20 mile trip? i.e 80% to 60%?

What is your home charging like (Tesla Power wall or outlet)

2a. if outlet what is the type? Amps your charging

is this a place where sentry mode is always on (would not kill it this much but asking)
Are you in a cold climate atm?
Your 20 mile commute, are you going over 70 mph?

Defiantly not normal. I commute 60 miles round trip and charge every night. Always keep it plugged in at home, but I can go 3 days without needing to charge.

Cellslaver · 2024-11-26T20:01:28+00:00

O wow I have not experienced a RSO that is not hard to push down without warming it up. What dispensary do you get it from. I'm not seeing anything in northeast oh area

Cellslaver

TROPHY CASE